Reviews Led Dot Matrix Module

4 In 1 MAX7219 Dot Matrix Module Microcontroller With 5 Pin Line

  • A single module can drive a 8x8 dot matrix common cathode.
  • Fixing screws with 64 holes with a diameter 3mm.
  • Module with input and output interfaces, support for cascading multiple modules.
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • ...asurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check Stock

Treedix UNO Project Basic Starter Kit Multi-Function Shield Compatible with Arduino IDE UNO R3 MEGA Nano Kit for Starter

  • This Basic stater kit is great for beginners who are interested in learning programming. It is easy to learn and brings a lot of fun to learners. You can also DIY more interesting projects by yourself..
  • There is a ATmega328P microcontroller and expansion board in the kit, we provide 80 components, don’t worry, you definitely have enough accessories to complete your project.
  • We focus on updating and adding more advanced modules, such as dot matrix module, button module, DHT11 module, DS1302, etc. All modules are soldered, so it is easy to wire..
  • We attach great importance to product quality control, and have always cared about thecustoms experience and improve the product function details.
  • This kit is a high-quality kit, which is perfectly compatible with Arduino.
Check Stock

Flashpoint XPLOR 600 HSS Battery-Powered Monolight with Built-in R2 2.4GHz Radio Remote System - Bowens Mount (AD600)

  • 600Ws, GN87, 9 steps of power adjustment(1/1 to 1/256). Stable color temperature at 5600±200K over the entire power range..
  • Fully support High-speed sync (up to 1/8000 seconds), first-curtain sync, and second-curtain sync..
  • Optical and Built-in 2.4G wireless transmission to offer stable output. 80M Wireless Control with precision..
  • 11.1V/8700mAh large capacity lithium battery pack to provide 500 full power flashes and recycle in 0.01-2.5 second. DC/AC are both applicable(Change to AC alternating current module after lithium battery pack detached)..
  • 10W LED modeling lamp can adjust light brightness in three steps. Large and clear dot-matrix LCD panel offers convenient operation. With handle to adjust different shooting directions of the flash. USB firmware upgrades helps keep pace with the latest technology..
Check Stock

NORLANYA Infrared Dot Matrix SkinLift Skin Tightening Device, Skin Firming & Wrinkle Removal Beauty Apparatus

  • Infrared Dot Matrix SkinLift is a noninvasive skin care procedure, meaning there is no cutting of the skin to perform it, which utilizes high energy to tighten and care the skin and improve its contour..
  • Infrared Dot Matrix SkinLift works by stimulating the under layer of the skin, known as the dermis and causes collagen creation, called neocollagenesis..
  • This new collagen makes the skin look firmer & tighter and improves the overall texture of the skin and the body shape. Unlike lasers, the infrared Dot Matrix SkinLift procedure works on all skin types and colors..
  • Generally patients will usually undergo 8-10 times with Infrared Dot Matrix SkinLift to see visable results. But some people may see differences/improvements just after 1-2 times of use. The Dot Matrix SkinLift stimulates a large volume of collagen in the deeper layers of the skin. Results develop over time and tightening and lifting result can be seen in up to 2 months..
  • Rechargeable - A full charge takes 3-4 hours and then it can work 30-45 mins. It is small and you can put it in pocket and carry around. It needs to use with water-based gel/lotion/serum during treatment. No brand of product required. Gel not included..
Check Stock

Bluetooth FM Transmitter Car MP3 Player Hands-Free Car Kit Wireless Radio Audio Adapter with Dual USB 5V 2.1A USB Port U Disk TF Card Folder Playback AUX Input Output Voice Navigation

  • Bluetooth version 4.0, support Bluetooth call, Bluetooth music transmission, caller number.
  • Support TF Card / U disc player and card reader function, support MP3/WMA format music.
  • Double USB charging port 2.1A can expand the portable device function, suitable for all mobile phone, tablet and other electronic products charge.
  • 1.3 inch LED dot matrix screen, display frequency point, file name, and working state information.
Check Stock

NORLANYA Mini Anti-Aging Dot Matrix SkinLift Device, Wrinkle Reduction Face Lifting Machine (Platinum Head, Charging Dock)

  • Dot Matrix SkinLift is a noninvasive skin care procedure, meaning there is no cutting of the skin to perform it, which utilizes high energy to tighten and tone the body and improve its contour..
  • Dot Matrix SkinLift works by stimulating the under layer of the skin, known as the dermis and causes collagen creation, called neocollagenesis..
  • This new collagen makes the skin look firmer & tighter and improves the overall texture of the skin and the body shape. Unlike lasers, Dot Matrix SkinLift procedure works on all skin types and colors..
  • Generally patients will usually undergo 8-10 times with Dot Matrix SkinLift to see visable results. But some people may see differences/improvements just after 1-2 times of use. The Dot Matrix SkinLift stimulates a large volume of collagen in the deeper layers of the skin. Results develop over time and tightening and lifting result can be seen in up to 2 months..
  • Rechargeable - A full charge takes 3-4 hours and then it can work 30-45 mins. It is small and you can put it in pocket and carry around. It needs to use with water-based gel/lotion/serum during treatment. No brand of product required. Gel not included..
Check Stock

Lights88 532nm Green Laser Module Diode Laser Beam Driver(5mw Green Dot Laser Module)

  • 100mW Module: This is a 100mW module that can emit a 405nm blue-violet ..
  • Adjustable focus design: dot diode module adopts adjustable focus design.In other words, the spot size of this dot diode module is adjustable..
  • High Reliability Material: This dot diode module is made of durable copper shell for long life..
  • Continuous output: This dot diode module supports continuous output and can be used for a long time..
  • Application: This dot diode module is designed for engraving machine, cutter and so on..
Check Stock

DC 3-5V 405nm 100mW Mini Dot Diode Module Head Adjustable Focus Blue Violet Diode Module Micro Tube

  • 100mW Module: This is a 100mW module that can emit a 405nm blue-violet ..
  • Adjustable focus design: dot diode module adopts adjustable focus design.In other words, the spot size of this dot diode module is adjustable..
  • High Reliability Material: This dot diode module is made of durable copper shell for long life..
  • Continuous output: This dot diode module supports continuous output and can be used for a long time..
  • Application: This dot diode module is designed for engraving machine, cutter and so on..
Check Stock

SunFounder Raspberry Pi Ultimate Starter Kit for Raspberry Pi 4B 3B+ 400 with PiCrawler AI Robot kit for Raspberry Pi

  • ... and sensor modules, the suite of 131 example projects will maximize the functionality of all Raspberry Pi models..
  • 【337 Components and IoT Modules】Comes with all the necessary components and IoT modules for learning application programming and exploring creative prototyping, such as: camera module, speaker, dot matrix module, I2C LCD module, infrared sensor, accelerometer, 9G servo motor, and many more..
  • 【Raspberry Pi Robot】The PiCrawler is a flexible AI robot kit compatible with Raspberry Pi 4B, 3B, 3B+ and 2B (Raspberry Pi not included). Suitable for adults and teens, the PiCrawler is the ideal platform for learning robotics programming, OpenCV, TensorFlow and Deep Learning..
  • 【Various Actions】The Raspberry Pi Robot Kit can be programmed with different actions (13 actions examples provided for your reference, such as: push up, twist and wave etc). You can also customize the actions according to your needs..
  • 【One-stop Online Learning & Programming】SunFounders online learning platform provides a professional one-stop shop for programming the Raspberry Pi. With detailed tutorials and abundant content, supports reading, editing, programming and instant downloading of all of the provided code, and new content is updated continuously..
Check Stock

Godox AD600BM 600Ws GN87 HSS Flash Strobe Monolight with 8700mAh Battery, 600W Portable Lamp Flash Head, 31'X31' Flash Softbox, 7' Standard Reflector, 7' Flash Diffuser and Portable Flash Bag

  • 600Ws, GN87, 9 steps of power adjustment(1/1 to 1/256). Stable color temperature at 5600±200K over the entire power range..
  • Fully support High-speed sync (up to 1/8000 seconds), first-curtain sync, and second-curtain sync..
  • Optical and Built-in 2.4G wireless transmission to offer stable output. 80M Wireless Control with precision..
  • 11.1V/8700mAh large capacity lithium battery pack to provide 500 full power flashes and recycle in 0.01-2.5 second. DC/AC are both applicable(Change to AC alternating current module after lithium battery pack detached)..
  • 10W LED modeling lamp can adjust light brightness in three steps. Large and clear dot-matrix LCD panel offers convenient operation. With handle to adjust different shooting directions of the flash. USB firmware upgrades helps keep pace with the latest technology..
Check Stock

OKI C911dn Digital LED Color Printer 62439901

  • OKI MICROLINE 420 Dot Matrix Printer (9-pin) (570 cps) (128 KB) (240 x 216 dpi) (Max Duty Cycle 24 000 Pages) (Parallel) (USB) (Energy Star) (Product Color: Black).
Check Stock

Oki 62446501 B4600 Mono LED Printer,White

  • OKI MICROLINE 490 Dot Matrix Printer (24-pin) (475 cps) (128 KB) (240 x 216 dpi) (Max Duty Cycle 20 000 Pages) (Parallel) (USB) (Energy Star).
Check Stock