Reviews Led Bumper Light

Bestview LED Side Marker Lights for Honda Civic 10th 10 Gen Civic 2016 2017 2018 2019 2020 2021, Switchback Dynamic Amber & White Front Bumper led Side Marker Light,2 Packs(Smoked Len)

  • ✅【Vehicle Fitment List】:Bestview Front Bumper LED side marker for Honda Civic 10Gen 2016 2017 2018 2019 2020 2021 ..
  • ✅【Dually Switchback Function】:Honda Civic 10Gen Front Bumper LED side marker light built-in 138pcs full LED chips with dual-color switchback features. Switchback different color between white led running light and amber led turn signal light.Full perfect focal LED lighting strips with super bright lighting output，provide you safer drive experience..
  • ✅【High Quality】:Made of high quality ABS shell and PC lens ,lifespan more than 50000 hours.IP67 waterproof and Fully sealed designed, no need to worry about moisture go inside while driving in the rainy days.They are the best replacement for old or burnt out bumper ligh.
  • ✅【Easy Installation】:Plug and play, directly replace the stock Side Marker light, just remove the original light and insert the new plug into the socket. Non-polarity sensitive, requires no modification or trimming, and installs in minutes.There are no alarms and no fault flashes when the car is switched on..
  • ✅ 【Package List】:4x Front Bumper LED side marker .If you have any questions when you receive the goods, please leave us a message. Our customer service will give you a satisfactory answer wi....
Check Stock

Tioyar Rear Bumper with 4 LED lights,D-Ring Mounts Hitch and Tire Carrier for 87-06 Wrangler TJ/YJ

  • Fit 1987-2006 Wrangler TJ/YJ modunlimited models (including: Freedom, Sports, Rubicon, Shahara)..
  • Rear bumper material: 5/32 inch thick low carbon hard steel and 2 inch x 0.120 inch precision tolerance steel tube, with stronger bumper, black powder....
  • Two 4.75-ton high-strength D-ring mounts are welded to the rear bumper to provide 2x4.75T D-rings. The maximum tension can support 12,000 pounds. It....
  • Built-in led lamp design: beautiful and elegant. Rear bumper with spare tire frame, with 2x20W LED aluminum light + 2x18W LED aluminum light. LED....
  • Easy to install without drilling or cutting. Follow the instructions to install!.
Check Stock

Hooke Road Tundra Front Winch Bumper +Rear Bumper Compatible with Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 90 lbs)..
Check Stock

Tioyar Front Bumper w/Winch Plate + 5 LED Lights Fit 1984-2001 Cherokee XJ and Comanche MJ

  • Fit 84-01 Cherokee XJ /1984-2001 Comanche MJ.
  • Bumper uses 5/32" thick low carbon hard steel and 2" x 0.120" precision tolerance steel tubes to make the bumper harder and more durable. The grade 3 textured black powder coating is corrosion resistant and durable..
  • Front bumpers have two 4.75-ton high-strength D-ring mounting seats welded into the bumper. A total of 2x4.75T D-rings are provided. The front bumper contains a built-in winch plate that can support a 12,000-pound winch. inside and outside of the D-ring mount are mechanically welded to achieve maximum strength..
  • Both the inside and outside of the D-ring mount are mechanically welded to achieve maximum strength. Even on a dark road, the built-in LED light can provide a clearer view. It is also safer when off-road. The front bumper is equipped with 1x144W LED aluminum light + 2x20W LED aluminum lights + 2x18W LED aluminum lights..
  • Easy to install without drilling or cutting. Follow the instructions to install!.
Check Stock

Smittybilt 76651D-01 SRC Classic Rear Bumper

  • Fitment - Tioyar front & rear bumper combo fits for 1997-2006 Wrangler TJ (including: Freedom, Sports, Rubicon, Shahara)..
  • Front and rear bumper materials: 5/32 inch thick low carbon hard steel and 2 inch x 0.120 inch precision tolerance steel tube, with stronger bumper,....
  • Built-in led light design: beautiful and elegant. The front bumper is equipped with 2x20W LED aluminum lights+2x18W LED aluminum lights. The rear....
  • Front bumpers have two 4.75-ton high-strength D-ring mounting seats welded into the bumper. A total of 2x4.75T D-rings are provided. The maximum....
  • Easy to install without drilling or cutting. Follow the instructions to install!.
Check Stock

Hooke Road Tundra Front Winch Bumper & Rear Bumper Kit for Toyota Tundra 2007 2008 2009 2010 2011 2012 2013 Pickup Truck (Textured Black Steel)

  • FITMENT: Both front and rear bumper for 2007-2013 Tundra Pickup Truck. Simple bolt-on installation, no cutting or drilling required. (Not compatible with front and rear factory sensors. ).
  • DESIGN: Rugged styling and full protection bumper. Front bumper equipped with a winch plate and a bull bar hoop for extra light bar. Rear bumper compatible with factory receiver hitch. Include mounting holes for licence plate and licence plate light..
  • CONSTRUCTION: Heavy-duty, high tensile 10-gauge(9/64 Inch) steel for rear bumper.
  • 11-gauge(1/8 Inch) steel for front bumper.
  • 8-gauge(11/64 Inch) for mounting bracket plate..
  • CORROSION RESISTANCE: Textured black powder coat finish & Premium E-coating process for 5-year corrosion protection under normal use..
  • Order will be shipped in 3 packages. Package 1&2: Assembled front bumper.
  • 12000-pound capacity winch plate. 4×18W LED spotlights. Mounting hardware accessories.
  • Installation instruction.(Bumper weight: about 133 lbs). Package 3: Assembled rear bumper.
  • Installation instruction. (Bumper weight: about 80 lbs)..
Check Stock

RC LED Light Bar Roof Lamp Headlight Tail Light Kit Bumper Light Compatible with Traxxas RC Car Truck Crawler Tamiya Losi HPI Rustler Axial Police Lights (100mm 2 Bar)

  • Color changeable high-intensity LED light kit can be used as headlight, tail light, roof light, front/rear bumper light and police lights..
  • The 2 light bars can both be controlled remotely via your transmitter or the button on the LED controller. 13 switchable light modes and colors changeable. On/off control.
  • Aluminum alloy frame and transparent acrylic protective cover effectively protect the lights from damage and dirt..
  • Input Voltage: 5V~15V, Max Power: 5.6W (when 2 light bar all LED white color).
  • Compatible with nearly all brand RC car truck crawler like Traxxas Tamiya. The light bar can be mount on the body, roof, front bumper, and rear bumper using the included bracket and zip ties.
Check Stock

OFFROAD GAMERS 6 Inch Round Offroad Lights 65W 5700LM LED Driving Light Solid/Strobe Side Shooter Light Waterproof with Trucks Wrangler Pickup ATV UTV 1 PCS (6 Inch 65W Driving White Beam)

  • ...y duty LED light is suitable for all 10-30V off road lighting, apply to any types of vehicles and devices, great for Trucks, 4X4 SUV, ATV, UTV, Pickup, Boats, Tractor, Construction Vehicles, Heavy Equipment Lighting, Farm Vehicles, Van Camper, Industrial and other fields. This LED driving light could mount on front bumper, bull bar, lower bumper opening, hood, roof rack, rear bumper, ditch, A pillar, etc.
  • [WHAT YOU GET] – 1pcs x 6 inch Round LED driving light with heavy-duty adjustable mount bracket,1pcs screw and nuts bag. Full 100% satisfaction AFTER-SALES included. If there are any issues, simply reach out to us. Get one risk free! 100% satisfaction aftersale services..
Check Stock

Tioyar Front Bumper + Rear Bumper with Winch Plate & LED Lights & 2 Hitch Receiver Kit for 97-06 Wrangler TJ Textured Black

  • Fitment - Tioyar front & rear bumper combo fits for 1997-2006 Wrangler TJ (including: Freedom, Sports, Rubicon, Shahara)..
  • Front and rear bumper materials: 5/32 inch thick low carbon hard steel and 2 inch x 0.120 inch precision tolerance steel tube, with stronger bumper,....
  • Built-in led light design: beautiful and elegant. The front bumper is equipped with 2x20W LED aluminum lights+2x18W LED aluminum lights. The rear....
  • Front bumpers have two 4.75-ton high-strength D-ring mounting seats welded into the bumper. A total of 2x4.75T D-rings are provided. The maximum....
  • Easy to install without drilling or cutting. Follow the instructions to install!.
Check Stock

Front Winch Bumper Compatible with Toyota 2016-2022 Tacoma Guard Bull Bar W/Winch Mount 4×4 Front Bumper

  • Front Winch Bumper guard compatible with 4×4 2016 2017-2022 Toyota Tacoma. Precision designed to match your vehicle’s body lines.
  • Solid all-welded construction for maximum strength and safety. High quality steel constructions, front winch bumper guard come prepped with powder coated. Rust protection. Built to strict quality control standards.
  • 3/16″ Plate Front Bumper with 1/4″ Winch Mount,10,000 lb winch capacity (winch not included)..
  • Heavy duty mounting / recovery points that accommodate D-Ring shackles (Shackles not included). Fits 20″ LED dual row LED light bar (light bar not included).
  • Requires trimming of front bumper,easy bolt-on. No cutting and no drilling. Instruction is included. Material:Steel.
Check Stock

‎ECOTRIC Front Bumper Compatible with 2007-2022 Jeep Wrangler JK/JKU JL/JLU Gladiator JT Front Bumper Rock Crawler Winch Plate W/Winch Plate & 2 18W LED Lights D-rings

  • Update the look and capability of your Jeep Wrangler JK with this high quality Penton bolt-on bumper. Compatible with 2007-2018 Jeep Wrangler JK.
  • Compatible with 2018-2022 Wrangler JL & Unlimited JLU.
  • Compatible with 2020-2022 Gladiator JT all models. Dose not Compatible with 2017 JK Rubicon Recon model..
  • The front bumper with LED fog light compatibility are a perfect upgrade for those looking for increased protection while keeping fog light function and style..
  • 1/4″ thick custom mounting brackets. Ultra-Rugged, one-piece fully welded design for extra strength. Durable steel construction – 2″ x .120″ wall 72lbs.Bumper size 56″ width x 7.5″ depth.Winch plate size 24″ x 7.5″. Powder-coated textured black..
  • Packing List: 1 x Front Bumper, 2 x 18w CREE LED Fog Lights, 2 x 18w CREE LED Work Lights, 2 x 4.75ton D-ring isolator for free. Include all harnesses in the picture. Not include extension connector wires..
  • Update the look and capability of your Jeep Wrangler JK with this high quality bolt-on bumper..
Check Stock

Syon Auto FITS 2014-2017 INFINITI Q50 GLOSS BLACK SHARK FIN REAR DIFFUSER W/ LED BRAKE LIGHT

  • For 2014-2017 Infiniti Q50 all 4 Door Sedan models. Will Not Fit 2018 and Up Models.
  • Package Included: 1x Painted Glossy Black Rear Bumper Diffuser As Shown in Pictures..
  • Rear Bumper Diffuser in Shark Fins Vortex Design Featuring the 3rd LED Brake Light.
  • Apply Directly On the Existing Bumper, Screws and Double-Sided Tapes Included for Easy Installation. x x Note: Wiring is Required to Activate the LED Brake Light! x x.
  • Improve Aerodynamic and Sporty Appearance All at Once.
Check Stock

RC Front Bumper, RCPLAGA Metal Front Bumper 1/10 Front Bumper with LED Headlights RC Winch Mount Seat for 1/10 Axial SCX10 90046 TRX4 RC4WD D90 TF2 RC Crawler Car

  • 【1/10 RC CAR UPGRADE ACCESSORIES】: RC front bumper is suitable for TRX4 Axial SCX10 90046 RC4WD D90 TF2 RC Crawler Car, is a practical accessory for 1/10 RC crawler car..
  • 【QUALITY MATERIAL】: Our RC front bumper is manufactured by high‑quality and firm yet light metal material for maximum durability..
  • 【PROTECTION AND HIGH SIMULATION】: Fix the 1/10 RC front bumper to the chassis with screws to provide extra strength and protection. The mounting post can protect the body and make your RC car look more real..
  • 【WITH LED LIGHT BAR】: This RC metal bumper is equipped with LED light bar, which is bright, and effectively protect the RC car at night driving..
  • 【Excellence Performance】: RC front bumper can enhances RC crawler performance in handling and durability, providing unmatched driving versatility..
Check Stock