Reviews Lead Ingots Pb

yzc Rosin core solder-Solder wire 63-37 Solder flux, Electronic solder, diameter 1MM, net weight 20G, portable storage tube, suitable for electronics, circuit boards, ICs, etc. DIY(Rosin core solder)

• 【rosin core solder wire:】Solder flux solder wire with special formula of high-quality tin ingots from Yunnan, China and high-quality rosin..
• 【Tin wire parameters:】 rosin solder wire Tin 63%- Lead 37% (Sn63-Pb37)..
• 【Soldering wire specifications:】rosin flux content 1.8%, rosin solder wire 1.0mm (0.0394inch), 20 gm (0.044lbs), gross weight 28 gm (0.0617lbs),Tin pen is suitable for carrying in a pocket..
• 【Low melting point:】 361F/183C. Easy to solder, smooth flow, fast soldering speed and firm solder joints..
• 【Electronic solder Application:】Rosin core solder wire for-solder for electronics Have Very good soldering ability, especially the repair of electrical equipment such as circuit boards,electronics，IC, home improvement, cable TV, radio/sterro,toys etc DIY..

MagBay Lures Lyman 10-1 Pound Lead INGOTS Fishing Weights,SINKERS OR Bullets Lead Casting 10

• Made in the USA - Sold by total weight not Ingot Count.
• Lead ingots 1+ lbs /each will add up to over total weight of listing.

MagBay Lures Lyman 10-1 Pound Lead INGOTS, Fishing Weights,SINKERS OR Bullets Lead Casting (20)

• Made in the USA - Sold by total weight not Ingot Count.
• Lead ingots 1+ lbs /each will add up to over total weight of listing.

12.5 lbs Clean Lead Ingots

• Package Dimensions: 9 inch L x 5.6 inch W x 1.8 inch H.
• Package weight of the Product: 13 Pounds.

Tin Ingot 2 pounds | 99.9+% Pure Raw Tin Metal by MS MetalShipper

• ✔️ Tin Ingot (2 pounds | 99.9+% Pure) Our 2lb Tin Ingots are approximately 2lbs each and you will receive two ingots totaling 2lbs. They are all sourced directly from the Minsur mine in Peru where they are produced and are 100% virgin metal (not recycled). We sell this metal in ingot form, so if you need 8lbs total, simply add a quantity of 4 to your cart. Be sure to see our promotional discounts for certain quantity levels if you would like to save money per ingot..
• ✔️ USAGE - This is high purity tin that can be confidently used in any application where tin is required. This item is one of our best sellers because of its versatility and ease of use..
• ✔️ SIZE - Each tin ingot is approximately 4 inches long by 2 inches wide by 1.50 inches high. The exact size of each ingot will vary slightly..
• ✔️ SPECIFICATIONS - Meets ASTM B339 specification. * Atomic Number = 50 | Melting Point (F) = 450 | Atomic Mass= 118.71 | Boiling Point (F) = 4100 | Density (g/cm3) = 7.29. Analysis: TIN 99.9650%, ANTIMONY 0.0184%, LEAD 0.0049%, BISMUTH 0.0023%, COPPER 0.0020%..
• ✔️ PACKAGING - This 2lbs of tin ingot will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation..

Tin Ingot 4 pounds | 99.9+% Pure Raw Tin Metal by MS MetalShipper

• ✔️ Tin Ingot (4 pounds | 99.9+% Pure) Our 4lb Tin Ingots are approximately 2lbs each and you will receive two ingots totaling 4lbs. They are all sourced directly from the Minsur mine in Peru where they are produced and are 100% virgin metal (not recycled). We sell this metal in ingot form, so if you need 12lbs total, simply add a quantity of 3 to your cart. Be sure to see our promotional discounts for certain quantity levels if you would like to save money per ingot..
• ✔️ USAGE - This is high purity tin that can be confidently used in any application where tin is required. This item is one of our best sellers because of its versatility and ease of use..
• ✔️ SIZE - Each tin ingot is approximately 4 inches long by 2 inches wide by 1.50 inches high. The exact size of each ingot will vary slightly..
• ✔️ SPECIFICATIONS - Meets ASTM B339 specification. * Atomic Number = 50 | Melting Point (F) = 450 | Atomic Mass= 118.71 | Boiling Point (F) = 4100 | Density (g/cm3) = 7.29. Analysis: TIN 99.9650%, ANTIMONY 0.0184%, LEAD 0.0049%, BISMUTH 0.0023%, COPPER 0.0020%..
• ✔️ PACKAGING - This 4lbs of tin ingot will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation..

Lead Cast Rod - 1 inch Diameter x 1 Foot Length

Lyman Lead Ingot Mould,Multiple

• Sides have 30 degree draft for easy ejection.

RotoMetals Lyman #2 Bullet Ingot (90% Lead, 5% Tin, 5% Antimony) about 5 pound ingot

• Ingots are approximately 8-3/4" x 1" x 2" and weigh 5 pounds (+/- .25)..
• The Brinell Hardness of this Linotype alloy is about 15..

6' Cast Iron Wire Strip Gold Silver Copper Aluminum Precious Metal Jewelry Casting Mold

• RCBS is the leading manufacturer of ammunition reloading equipment for rifles and pistols.
• Perfect for melting down scrap lead for future use.

Rothco BDU Shorts, Midnight Digital Camo, X-Large

• ...le owner keeps it in his car he can check system failure on his own way no need to go to technician..
• 【Easy to Use】ANCEL provides how-to guides and video tutorials to help you easily complete your repair work. With the press of a switch, you'll have an instant hot lead or ground lead. Use the probe tip and ground lead simultaneously to power up components right in your hand. Instantly check components for continuity as well as identify positive, negative and open circuits. Locate shorts without wasting fuses. TIP: The probe is on the back of the device..
• 【Voltage Indicator】The LED indicator on the front of the unit will show you the battery voltage when it is connected. You can use it to determine a whole range of things. You can even do a quick check of the alternator by plugging it in and starting the car. The voltage should go from about 12.6 volts to 14.0 volts. This is also useful if you have a situation where a power supply has a large voltage drop, if you notice low voltage on certain branches when checking fuses, etc..
• 【Circuit Protection】The PB100 has a built-in 8-amp circuit breaker to preven....

Pure Soft Lead Ingot

• ✔️ PEWTER INGOT 2LBS - 97LF - 97% TIN | 2.5% Bismuth | 0.5% COPPER. Our Pewter Ingots are approximately 2 pounds each and are made up of 97% Tin, 2.5% Bismuth, and 0.5% Copper. This is lead-free pewter and is very good to use for casting. We sell this Pewter in ingot form as shown in the product images. This type of Pewter is also known as Britannia Alloy. Be sure to see our promotional discounts for certain quantity levels if you would like to save money. MADE IN THE USA..
• ✔️ USAGE - This is lead-free pewter and is very good to use for casting. It melts easily and retains its shine. This pewter is used often in jewelry making and also making utensils, teapots, candlesticks, urns, maces, and drinking vessels. This item is one of our best sellers because of its versatility and ease of use..
• ✔️ SIZE - Each 2lb pewter ingot is approximately 4.25 inches long by 2 inches wide by 1.25 inches high.
• ✔️ SPECIFICATIONS - Melting Point (F) = 563 | Pouring Temp (F) = 650 | Density (g/cm3) = 7.28 | Analysis: TIN 92%, BISMUTH 2.5%, COPPER 0.5%..
• ✔️ PACKAGING - This 2lb pewter ingot will arrive sealed in heavy duty BPA free plastic to prevent any corrosion or oxidation. Each 2lb ingot is guaranteed to be 2lbs plus or minus 4%..

Pewter Ingot 2lbs - Britannia Alloy - Lead Free By MS MetalShipper

• ✔️ PEWTER INGOT 2LBS - BRITANNIA ALLOY - 92% TIN | 7.5% ANTIMONY | 0.5% COPPER. Our Pewter Ingots are approximately 2 pounds each and are made up....
• ✔️ USAGE - This is lead-free pewter and is very good to use for casting. It melts easily and retains its shine. This pewter is used in many....
• ✔️ SIZE - Each 2lb pewter ingot is approximately 4.25 inches long by 2 inches wide by 1.25 inches high.
• ✔️ SPECIFICATIONS - Melting Point (F) = 563 | Pouring Temp (F) = 650 | Density (g/cm3) = 7.28 | Analysis: TIN 91.9708%, ANTIMONY 7.4992%, COPPER....
• ✔️ PACKAGING - This 2lb pewter ingot will arrive sealed inside of heavy duty BPA free plastic to prevent any corrosion or oxidation. Each 2lb....