Reviews Lcd For Raspberry 2

for Raspberry Pi 7 inch Capacitive Touch Screen IPS Display HDMI LCD Module 1024×600 Touchscreen for Raspberry Pi 4 3/2/1 Model B B+ A+/BeagleBone Black/Banana Pi, Support Windows 10/8.1/8/7

  • Raspberry Pi 7 inch display with capacitive touch screen Monitor, supports various systems, HDMI Interface for displaying , USB Interface for touching. Backlight can be turned off to lower power consumption..
  • 7inch IPS screen with 1024x600 high hardware resolution , a ideal choice for those who want a large screen and larger image with high resolution..
  • The 7'' touchscreen supports Raspberry Pi 4 3 B/ B+ /2 B/B/ A+, BB Black, Banana Pi , Banana Pro and other mainstream mini-PCs , as well as , the LCD can work as a general desktop computers. When works with Raspberry Pi, supports Raspbian/Ubuntu/Kali/Retropie/WIN10 IOT, driver free,When work as a computer monitor LCD, supports Windows 10/8.1/8/7, five-points touch, and driver free.
  • Note:1.Please set the config.txt file by addding [the hdmi_drive=1] into the end of code if you connect it with raspberry pi (like Quick Start in picture). Otherwise the LCD could not work properly.2.If the LCD work in abnormal states for long time, it may be broken if you don't set the config.txt file at the beginning.After setting config file,please power off the screen and put it aside for a few hours to avoid the flickers..
  • Note:If you use the LCD with Raspberry Pi 4B, you need to remove line dtoverlay=vc4-fkms-V3D from con....
Check Stock

SamIdea 2-Pack 40pin Male to Female IDC GPIO Rainbow Ribbon Cable Jumper Wire for Raspberry Pi A+/B+/3 B, 20cm/8'

  • 8" 40 Pin Ribbon Cable for Raspberry pi 3B ,Raspberry pi 2 model B,Raspberry pi 1B+, Raspberry pi 1A+,Raspberry pi zero W, Raspberry pi zero.
  • Pin Pitch: 2.54 mm,Their Diagram as Product image show.
  • 2x40 Pin Male to female IDC 2.54mm pitch ribbon cable flat GPIO Cable.
  • GPIO 40P 40-pin Rainbow Ribbon Cable.Raspberry Pi 3 2 Model B B+ and 3.5¡± 5 inch TFT touchscreen LCD display are not including..
  • SamIdea is a Registered Trademark, can not sold without authorization..
Check Stock

Treedix 3.5 inch TFT Touch Screen Module 320x480 Resolution LCD Display Compatible with Raspberry Pi 4B/3B/3B+ with Touch Pen ABS Case and Cooling Fan Compatible with Raspberry Pi 4B

  • The case can be used as raspberry pi case with mini cooling fan and 3.5 inch screen installed. The ABS case is specially designed for Raspberry Pi 4 Model B only..
  • The 3.5 inch LCD touch screen has 480 x 320 resolution, with resistive touch control.
  • The LCD touch screen can use GPIO interface for power supply.
  • The LCD screen has a 2-pin interafce for connecting the cooling fan, which can allow the screen and cooling fan both working at the same time..
  • The LCD touch screen is suitable for Raspberry Pi 4B/ 3B/ 3B+ versions. When used for Pi 4B, it can support for Raspbian system, for kali Linux system. When used for 3B/3B+, it can support for Raspbian system, for ubuntu system ,for kali Linux system..
  • The case features an easy-to-install split design that protects your PI computer and screen, as well as a cooling fan mounted on an aluminum stand and a hot silicon pad for cooling the chip to keep the PI computer and screen cool..
Check Stock

Geekworm for Raspberry Pi 4 Model B, 3.5 inch Touch Screen with ABS Case and Pi 4 Heatsinks Kit, Max 50FPS 480x320 Pixel Monitor TFT Touch LCD (Support Raspbian, Ubuntu, Kali, Retropie System)

  • For the document and download information, refer to Geekworm WiKi search (3.5_LCD_B)..
  • Note: 1. The Raspberry Pi 4B mother board and cooling fan is not included in all the packing list. 2. The black ABS case only suitable for this 3.5 inch screen with Raspberry Pi 4 Model B, do not support other Raspberry Pi versions. Not support install cooling fan..
  • Physical resolution 320 x 480, with resistive touch control.
  • it supports up to 125MHz SPI signal input, showing stable and no flicker.
  • Support Raspbian/Ubuntu/Kali/Retropie system, provide driver and image, please refer to WiKi(user manual)..
  • LCD Interface: SPI (up to 125MHz SPI input, Max FPS: 50Mhz).
Check Stock

7inch HDMI LCD IPS Capacitive Touch Screen 1024×600 Display Monitor for All Rev Raspberry Pi 4B/3B+/3B/2B/B+/A+/Zero,BeagleBone Black Windows 10/8.1/8/7

  • (The newest Rev4.1) 7inch HDMI LCD (C), IPS screen, Capacitive Touch Screen ,HDMI interface,1024x600 hardware resolution.HDMI Interface for displaying....
  • Supports popular mini PCs such as Raspberry Pi, BB Black, as well as general desktop computers: When works with Raspberry Pi, supports....
  • Note:Please set the config.txt file by addding [the hdmi_drive=1] into the end of code if you connect it with raspberry pi. (like manual in....
  • Note:If the LCD work in abnormal states for long time, it may be broken if you don't set the config.txt file at the beginning.After setting config....
  • Note: to use the LCD with following mini-PCs, additional cables are required and should be purchased separately: Raspberry Pi Zero: HDMI cable,....
Check Stock

UCTRONICS Pi Rack Pro for Raspberry Pi 4B, 19\ 1U Rack Mount, Support for 4 2.5\ SSDs, Secure Shutdown, 0.96\ Color Display for Raspberry Pi

  • 【For Raspberry Pi 4B】Designed specifically for the Raspberry Pi 4B, the Raspberry Pi rack allows you to install up to 4 RPis, making it easy to build small Raspberry Pi clusters..
  • 【4 SATA shields】No need for SATA-to-USB cables, just plug in 4 2.5" SSDs for additional storage capabilities. The board is also reserved for a fan interface, which supports external 2.54 2pin fans to cool the Raspberry Pi. Please note that the thickness of a 2.5" SSD cannot exceed 7mm..
  • 【Safety Shutdown】4 power buttons can be pressed to achieve a soft shutdown, and then press to power on. No longer worry about the damage caused by a hard shutdown on the Raspberry Pi..
  • 【0.96" LCD display】graphical display of RAM/Disk/Temp usage, IP address always on, and also supports custom display content..
  • 【19" 1U Rack Mount】19×5.72×1.75 inch(482.6×145.4×44.5mm), the pi rack can be installed into the cabinet or placed on the desktop. This solution not only beautifies your cabinet and desktop but also keeps dust out..
Check Stock

waveshare for Raspberry Pi Pico Evaluation Kit B Include Pi Pico Board with Pre-Soldered Header,1.14inch RGB Color LCD, 10DOF IMU Sensor Module,Dual GPIO Expander,Breadboard

  • Raspberry Pi Pico Evaluation Kit inlclude Raspberry Pi Pico with pre-soldered header ,1.14inch LCD Display Module,10-DOF IMU Sensor Module,Dual GPIO Expander ,830 Quality Breadboard etc.
  • Raspberry Pi Pico Board,a tiny, fast, and versatile microcontroller board,Built Using RP2040 Microcontroller Chip Designed By Raspberry Pi.
  • 1.14" LCD Display Module for Pico ,Embedded ST7789 Driver, Using SPI Bus.
  • 10-DOF IMU Sensor Module,an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I2C bus for communication..
  • Dual GPIO Expander for Pico,Two Sets Of Standard Raspberry Pi Pico GPIO Male Headers.
Check Stock

BIGTREETECH Upgrade PI TFT70 TFT LCD Display DSI 800x480 for Raspberry Pi Model 3D Printer Controller 7in Capacitive Touch Screen 165X100mm

  • The high-quality ribbon flex cable is soft and compact, easy to install, perfect show video..
  • Feature: the fit for Raspberry Pi camera cable each end is reinforced with a stiffener to make insertion easier. Work fine with your need and would be....
  • Easy to use: directly-pluggable, one end of the cable is 15 Pin 1.0mm Pitch interface to for Raspberry Pi camera and another end with 15 Pin 1.0mm....
  • Compatible: the cable fit for Raspberry Pi Model A/B/B+, Pi 2B, Raspberry Pi 3B, 3B+, Pi 4B, camera module and display.
  • If you have any issues for Raspberry Pi Camera Cable, please contact us, we will do our best for you..
Check Stock

Dorhea for Raspberry Pi 3 b+ Display 3.5 inch TFT LCD Screen Kit, 3.5'' 480x320 Resolution TFT Touch Screen Moudle with Protective Case Touch Pen Heatsinks for Raspberry Pi 3 B+,Pi 3 B, Pi 2, Pi Zero

  • 3.5 inch HD touch screen designed for Raspberry Pi 3B 2B/B+/A+ /A/B Zero, 320*480 resolution, better display with TFT LCD Display touch screen panel, No external power supply needed.
  • Raspberry Pi Case : Protective case design for Raspberry Pi 2 model B and Raspberry Pi 3 model B,protects your raspberry from scratches and damage, this case is easy to install and has good ventilation.
  • Copper & Aluminum Heatsink : 3 Copper & Aluminum heatsinks make sure your pi works stable,size perfectly matched with paspberry pi ,heatsink to cooling down CPU ,LAN ,VRAM, VGA, RAM, IC Chips, MOSFET SCR, Southbridge ,Northbridge etc.
  • Compatible With : Suitable for Raspberry Pi 3 Model B+,Raspberry Pi 3 Model B, Pi 2 Model B & Pi Model B+ . Access to all controls and features.
Check Stock

Aokin for Raspberry Pi Camera Cable, FFC Cable Ribbon Flex Extension Cable 15 Pin 1.0mm Pitch for Raspberry Pi, Octoprint Octopi Webcam, Monitor 3D Printer, etc, 50cm/19.68in

  • The high-quality ribbon flex cable is soft and compact, easy to install, perfect show video..
  • Feature: the fit Raspberry Pi camera cable each end is reinforced with a stiffener to make insertion easier. Work fine with your need and would be flexible with camera placement..
  • Easy to use: directly-pluggable, one end of the cable is 15 Pin 1.0mm Pitch interface to Raspberry Pi camera and another end with 15 Pin 1.0mm Pitch interface to Raspberry Pi board..
  • Compatible: the cable fit for Raspberry Pi Model A/B/B+, Pi 2B, Raspberry Pi 3B, 3B+, Pi 4B, camera module and display.
  • also use for LCD, LCD TV, car navigation, car audio, laptop, PC, DVD player, recorder, printer, copy machine, etc. Model: FFC.
  • If you have any issues for Raspberry Pi Camera Cable, please contact us, we will do our best for you..
Check Stock

19.6 inch Camera Cable for Raspberry Pi 4 B FFC FPC Ribbon 15 pin Extension Cord Flexible Flat Wire Cable Connection for LCD,Car Navigation,Car Audio,DVD Player,Recorder,Printer 19.6''/ 50cm (2 Pcs)

  • This ribbon flat cable is specially designed for stock long flex cable from a Raspberry Pi Camera for 19.6inch (50cm )..
  • The cable usually consists of a flat and flexible plastic film base, with multiple metallic conductors bonded to one surface..
  • Each order comes with two cables, the raspberry pi and pi camera shown in the picture are not included (but we have Pi camera in the shop)..
  • This cable is perfectly compatible for Raspberry Pi 3, 3 model b, 2, 2b and B+..
  • Also applicable for LCD, LCD TV, car navigation, car audio, laptop, PC, DVD player, recorder, printer, copy machine, etc..
Check Stock

7 inch 1024×600 Resistive Touch Screen HDMI Interface LCD Raspbian Ubuntu Driver Mini PC Computer Monitor Supports Raspberry Pi 4 3 2 Model B B+ @XYGStudy

  • Part Number: 7inch HDMI LCD. 7inch IPS screen, 1024x600 hardware resolution.
  • 1024x600, 7inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi. Directly Pluggable: Raspberry Pi 4B / 3B+ / 3A+ / 3B / 2B / 1B+....
  • Compatible and Direct-connect with any revision of Raspberry Pi (Additional HDMI Cable Required: Raspberry Pi Zero WH / Zero W / Zero).
  • Driver Provided: supports Raspbian / Ubuntu / Kali / Retropie. Supports future version which is backward compatible.
  • Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required.
Check Stock

5 inch HDMI LCD Display for Raspberry Pi 800x480 Touchscreen Monitor TFT Capacitive Screen Support Raspberry Pi 4B/ 3B+/A+/B/ 2B/ B+/A+/ Zero W Compatible with Windows 10/8.1/8 / 7

  • 【Raspberry Pi 5" Touch Display】5 inch Capacitive Touch Screen LCD (H) Slimmed-Down Version, 800×480, HDMI Display Port, USB Touch Port, Toughened Glass Panel, Low Power Consumption.
  • 【Working With Raspberry Pi】Supports all versions of Raspberry Pi, Supports Raspbian, 5-points touch, driver free.
  • Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free.
  • Supports Retropie, driver free (When working with Raspberry Pi Zero W, additional mini HDMl adapter and USB cable are required).
  • 【Working With PC】Supports Windows 10 / 8.1 / 8 / 7, 5-points touch, driver free.
  • 【Touch Control】5 inch Capacitive Touch Screen LCD Display, up to 5-points touch, depending on the operating system, up to 6H hardness toughened glass panel.
  • 【Package Content】5inch HDMI LCD (H) V4 x1, HDMI cable x1, HDMI to Micro HDMI Adapter x1, USB type A plug to micro B plug cable x1, RPi screws pack (4pcs) x1. Provide technical support.
Check Stock