Reviews Lcd Backlight Module

ACEIRMC 2pcs 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino R3 MEGA2560 Nano Due Duemilanove Robot (5pcs)

  • 1602 LCD Shield Module Display V3 for Arduino R3 MEGA2560 Nano DUE.
  • This is a 16x2 LCD Keypad module for Arduino Diecimila Duemilanove,MEGA1280, MEGA2560 board..
  • Blue Backlight with white words, adjustable backlighting.
  • 4 Bit LCD Library,V3 design, pins out for easy connecting.
  • 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot.
Check Stock

ACEIRMC 4pcs HD44780 IIC I2C 1602 LCD Display with IIC I2C TWI SPI Serial Interface Adapter 1602 LCD Display Blue Backlight for Arduino R3 Mega 2560

  • HD44780 1602 LCD Display Module DC 5V 16x2 Character LCM Blue Blacklight.
  • HD44780 IIC I2C1602 LCD Display with IIC I2C TWI SPI Serial Interface Adapter 1602 LCD Display Blue Backlight for Arduino.
Check Stock

4Pcs LCD1602 1602 LCD Module Green Screen 16x2 Character LCD Display with IIC I2C Serial Interface Adapter Module

  • 1602 lcd screen can display 2-lines x 16-characters with built-in industry standard HD44780 equivalent LCD controller.
  • LCD1602 1602 LCD module working voltage: 5V.
  • To come with a potentiometer, which is applied to adjust backlight and contrast.
  • It only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back..
  • LCD1602 1602 LCD module compatible with copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices..
  • 1602 display function: LCD display with I2C serial interface can be applied to display real time clock, temperature, humidity and so on..
Check Stock

Aoicrie 16x2 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter, IIC I2C TWI 1602 Serial LCD Module Display, for Mega 2560

  • IIC I2C TWI 1602 Serial LCD Module Display for R3 Mega 2560 16x2..
  • Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line)..
  • Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly..
  • With a potentiometer used to adjust backlight and contrast.Power supply: +5V, Address of the module: ox27..
  • Widely Applications: LCD display module based on the popular HD44780 controller, works great with for Mega2560 board and other micro-controllers..
Check Stock

Character Negative LCD Module 16x2 RGB Backlight for Arduino and MCU projects

  • 16x2 Character LCD module with RGB backlight.
  • HD44780 compatible with FSTN Positive display.
Check Stock

DFRobot DFR0063 LCD Display, 16x2 Character, White on Blue, 5V, 82 mm x 35 mm x 18 mm Size

  • LED LCD Universal TV Backlight Constant Current Backlight Lamp Driver Board Boost Step Up Module 10.8-24V to 15-80V 14-37 Inch.
Check Stock

HiLetgo 1.8\ inch ST7735R SPI 128 * 160 TFT LCD Display Module with PCB

  • A specially designed dot matrix LCD module which is used for displaying letters, numbers and symbols etc..
  • Consists of several 5X7 or 5X11 other dot matrix character bits.The interval exists between each line or each bit to creat a good character spacing and row spacing effect..
  • Based on HD44780 LCD chip and adopts standard 16-pin interface..
  • It has a contrast adjustment knob, backlight selection switch, but also with four directional buttons, a selection button And a reset button..
  • This 1602 LCD expansion board in the true sense of the circuit will be simplified, directly to the board inserted Arduino Duemilanove controller can be..
Check Stock

NIXON Dork Too Men s Watch - All Black

  • Custom digital LCD module with speaker to dictate the time. Functions include time, date, alarm and EL backlight..
  • 34mm custom injection molded stainless steel case with perforated stainless steel speaker cover and pushers, with micro USB charging port..
  • 21mm custom folded stainless steel single link bracelet with butterfly clasp closure..
Check Stock

7inch DSI LCD 800×480 for Raspberry Pi 4B/3B+/3A+/3B/2B /B+/A+ and Compute Module 4/3+/3, 800×480 Capacitive Touch Screen Monitor

  • 7inch DSI LCD,7inch TFT screen. 800x480 hardware resolution.
  • Capacitive touch panel, support 5-point touch.
  • Supports Pi 4B/3B+/3A+/3B/2B/B+/A+ and Compute Module 4/3+/3,but Compute Module 4/3+/3 requires extra adapter board.
  • Supports Raspbian, 5-points touch, driver free. Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free. Supports Retropie, driver free..
  • DSI interface, refresh rate up to 60Hz. Support backlight adjusts by software..
Check Stock

NEC 48 LCD Commercial Monitor LED Display P484

  • Cooling System: Thermodynamic cooling fans| Dimensions: Without stand| Width: 42.8 in| Depth: 2.2 in| Height: 24.6 in| Weight: 38.8 lbs| LCD Display Technology: S-PVA| Resolution: 1920 x 1080| Display Format: 1080p (Full HD)| Image Aspect Ratio: 16:9| Motion Enhancement Technology: 60 Hz Refresh Rate| LCD Backlight Technology: LED backlight - edge-lit| Image Contrast Ratio: 4000:1| Brightness: 700 cd/mý| Viewing Angle: 178 degrees| Viewing Angle (Vertical): 178 degrees| Response Time: 8 ms.
  • Additional Features: TileMatrix (10 x 10), Open Pluggable Specification slot, Carbon Footprint Meter, AMX Beacon Compatible, 24/7 Scheduler, 10-bit support, DICOM support, PJLink, Raspberry Pi Compute Module Compatible, SpectraView Engine support, Crestron Roomview support| Stand: Optional| Flat Panel Mount Interface: 300 x 300 mm| Supported Memory Cards: microSD| USB Port: Yes| USB Ports Qty: 3| Type: Standard remote| Speaker System: 2 speakers.
  • Output Power / Total: 20 Watt| External Speakers Amplifier Power (Total): 30 Watt| Speakers: 2 x main channel speaker - built-in - 10 Watt| Connectivity: LAN, NFC| LAN Protocol: Fast Ethernet| Connector Type: DVI-D input - bottom Ý HDMI input - bottom Ý HDMI - bottom Ý 2 x DisplayPort input - bottom Ý Display....
Check Stock

AITRIP LCD 2004 LCD Screen Smart Display Screen Controller Module with Cable for RAMPS 1.4 Compatible with Arduino Mega Pololu Shield for Reprap 3D Printer Kit Accessory

  • Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
  • LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD control panel.
  • 2004 LCD smart controller for 3D printer，Supports for RAMPS 1.4 control board.
  • This panel connect your RAMPS 1.4. 3D design print without a computer, just use the G code design stored on the SD card, SD card intelligent controller power supply. With Smart LCD Controller you can print 3D designs without USB connection to your computer.
  • A LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment, networking.
Check Stock

Honeywell Home RTH6360D1002 5-2 Day Programmable Thermostat

  • Large LCD digital display with backlight, easy to read in various lighting conditions, C-wire needed for proper installation(Tips, The product include an Electric Control Module and sensors).
  • Optional 7 day programming and non-programmable, Enjoy the flexible settings via full 7-Days/4-Periods Setting on device, to reduce energy usage, savings on annual heating and cooling costs..
  • EASILY INSTALL YOURSELF: It only takes about 30 minutes, Because our installation guide provides detailed installation steps, compatiblity:3H/2C, 2H/1C Heat pump, Aux Heat, Ventilator, Electric heating, Water heating, Millivolt system, Gas, Compressor..
  • Easily install yourself: Pluggable Module design, make DIY more efficiently. Save money: Homeowners save up to 17% annually on heating or cooling costs..
  • Vacation set-point override to reduce energy use while away from home, easy programmable mode ensures the desired temperature is reached by the programmed time..
Check Stock

DEVMO LCD 12864 Version Graphic Smart Display Controller Module Board with Adapter and Cable Compatible with RAMPS 1.4 Reprap 3D Printer Kit Mendel Prusa Ar-duino

  • A LCD display module with blue backlight, small and light appearance, suitbale for copiers, fax machines, laser printers, industrial test equipment,....
  • Small and light appearance, it is easy and convenient to use.
  • Suitable for copiers, fax machines, laser printers, industrial test equipment, networking equipment etc.
  • LCD control panel through which you can achieve spooling is the 3D model Gcode files are copied to the SD card, and then print the file via the LCD....
  • This version is an upgraded version of reprap smart controller.
Check Stock