Reviews Lathe Machines Roll Forming

Face End Mill, Mt3-Fmb22 Holder Extension 400R50-22 Face End Mill Cutter 10Pcs Apmt1604 CNC Carbide Inserts for Plate Cutting Heavy CNC Milling Cutting

  • HIGH-PRECISION MACHINING: Hardened high-precision shock resistance, good permeability, multiple impact resistance, good low temperature impact toughness, strong and durable, can increase the service life and shock resistance of the cutter head.
  • GOOD IMPACT RESISTANCE: Our end mills are ideal for heavy duty CNC milling, Model: 400R--Bore: 22--Number of Inserts: 4--Type of Insert: APMT1604--Number of Inserts: 10 Pieces.
  • MACHINING RANGE: This MT3-FMB22 holder has better cleanliness and more stable precision, can be used for sheet metal cutting, hardened inserts for steel.
  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection holes are connected more tightly, reducing machining errors.
  • WIDE RANGE OF APPLICATIONS: Lathe extension rods are the main accessories commonly used in milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

Double Bearing Live Revolving Centers For Lathe Machine- Engineering Tools (2MT- M12 X 1)

  • Quality Precision Double Bearing Live Revolving Centers-Made from Quality Tools Steel.
  • Comes in 2MT with M12 x 1 mounting threads to mount the chuck or drill chuck for long work piece support while turning on the lathe.
  • Chose as per your Lathe machine tailstock 's taper . Perfect for both Wood turning & metal working.
  • Shanks are hardened & precisely ground . The mounting thread spigot has been machined to hold through a spanner to hold it from revolving and tightening the chuck on it..
  • Concentric run out within 10 microns. Recommended for Conventional Lathe Machines Only.
Check Stock

Face End Mill Set,MT3-FMB22 Holder Extension,400R-50-22 Face End Mill Cutter,10pcs APMT1604 CNC Carbide Inserts,Good Impact Resistance,High Hardness,for Plate Cutting,Steel Material

  • EMBEDDED TOOL HOLDER: The lathe tool holder is embedded, which is easier to control than the flat-tail type tool holder, with high precision, and the threaded connection hole is connected more closely, which reduces the machining error.
  • HIGH PRECISION PROCESS:Our Mill Cutter kit adopts high-precision machining technology. The high-carbon steel material improves the hardness and durability of the surface, providing a comfortable feeling and beautiful appearance.
  • PROCESSING RANGE: This MT3-FMB22 holder has better cleanness and more stable accuracy, can be used for plate cutting, harden insert used for steel material.
  • WIDELY USED: The lathe holder extension is a commonly used main accessory for mill CNC machine tools, fixture mill cutter machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
  • GOOD IMPACT RESISTANCE: Our face end mill cutter is a good ideal tool for heavy CNC milling cutting,Model: 400R--Inner hole: 22--Number of blades: 4--Inserts type: APMT1604--Inserts quantity: 10pcs.
Check Stock

4 Inch 4 Jaw Mini Wood Lathe Self-Centering Chuck Set for Beginners Turning Wood Bowls Vases (1 Inch x 8TPI Thread)

  • PAKAGE LIST: Included Chuck body, a set of Tightening Levers, T allen wrench, Screw chuck.
  • FEATURES: Internal jaws tighten around workpieces varying from 1-1/2" to 3-3/8". External jaws spread inside of workpieces with pilot holes ranging from 2" to 3-7/8" Included screw chuck provides even more options for supporting your projects.
  • HIGH PERFORMANCE LATHE CHUCK：Our 4-inch 4 Jaws Lathe Chuck has the function of self centering with superior gripping force,it does not need to be repeatedly calibrated during clamping. It just needs to clamp the workpiece according to your needs, which is simple, fast and convenient.
  • WIDELY USED: Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Widely used for machine tools and accessories for general lathes and industrial machines.
  • FRIENDLY REMINDER: Definitely make sure you get it tight, Otherwise, It also loosens in the middle of your work, causing your project to fly off the lathe.
Check Stock

FJL FORCE Lathe Chuck Sets 4 Inch, Wood Lathe Chuck 5 Interchangeable 4-Jaw Wood Turning Lathe Nickel Plated Chuck, 1\x8Tpi Thread & 3/4\x16Tpi Adapter(Chuck Set)

  • ...e the replacement jaw,allowing you to focus on your creation without tedious steps..
  • 【WIDE RANGE OF APPLICATION】- FJL FORCE 4In lathe chuck is suitable for daily workpiece production,spindle and other large wood lathe projects,with 1'' x 8TPI to 3/4" x 16TPI adapter can be used in general lathes,grinders,milling machines and most wood lathe general lathes and industrial machinery lathes on the market..
Check Stock

National Nail 135055 250CT 1-Inch Plastic Cap Nail

  • Deformed ring shank for greater holding power electro galvanized to enhance corrosion resistance. Conforms to surfaces..
  • All hand driven caps are packaged as integral nail-cap units Cap nails round plastic burron cap ring shank lgth 1 inch count=250..
  • Flexible round head conforms to surface making it difficult for water to get under the cap. use to secure roofing felt, sheathing, building papers, etc..
  • Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe. Flexible plastic head..
  • Flexible round head conforms to surface making it difficult for water to get under the cap. Can be used for roofing felt, sheathing, polyethylene, roll roofing, re-roofing, chicken wire, wire lathe..
Check Stock

2 Pieces 1/2' X 4' Aluminum 6061 T6511 Solid Flat BAR 4' Long +.07'/-0 Extruded Mill Stock Saw Cut New

  • ...uminum flat mill bars measuring 1 x 2 x 8 inches (25mm x 50mm x 200mm). These bars have smooth surface and neatly cut edges without burrs. It will not scratch your hands. Perfect for your metal working project..
  • EASY TO MACHINE - Aluminum flat bar stock can be cut by lathes, CNC router systems, hack saw and milling machines. It is easy to machine or weld for milling or lathe work in a variety of applications and industries. And it can be heat treated as well..
  • VERSATILITY - The 1x2 inches aluminum bars do drill and tap easily. You can use it as part of a wire forming jig in a press or heat sink. 6061 aluminum bar stock is widely used in building projects, metal working, architectural applications, and more..
  • AFTER-SALES SERVICE - We actively answer your questions about our products. The goal is to make you happy with your purchase. If you are not 100% satisfied with aluminum tooling flat bar mill stock, just let us know. We'll get back to you with a satisfactory solution as soon as possible..
Check Stock

Hurricane Turning Tools, HSS, 3 Piece Bowl Gouge Set (1/4\

  • 【PRODUCTS INCLUDE】 - Lathe tools including(1)10.7"handle (2) 7.9"wood turning tools including square,round,diamond,square arcs(3)easy to replace the head of the T15 wrench,all parts are made of special hard sponge full fitted wrap,in the box..
  • 【5 SECONDS QUICK DISASSEMBLY】 - No tools required,simply loosen the knurled chuck and insert the wood lathe tools,then screw on the collet and you can immediately go to work,the whole process takes five seconds.The wood turning tools for lathe screw self-locking collet fits snugly into the top thread,so you can experience visible robustness..
  • 【HIGH CUTTING EFFICIENCY】 - Sharp high-density tungsten wood lathe cutting edge allows you to handle any wood lightly,and is more durable than other typical carbon and high-speed steel material wood turning tools.It is less likely to deform and stick during cutting,and if the cutting edge becomes dull,simply change the direction of the cutting edge with the included T15 wrench and you will have a fresh,clean cutting edge again..
  • 【EASY TO CONTROL】 - Whether pure aluminum solid handle,or the tool bar of high-speed steel material,mirror polishing treatment to ensure that you can move on the frame without obstacles,square axis wood lathe tools and the tool frame c....
Check Stock

Hegebeck Combined Center Drills Bit Countersinks Plain Type 1/8 Inch Dia Shank High Speed Steel HSS 6542 Silver 5 Pcs

  • 【MATERIAL】-This combined center drills was made by High Speed Steel 6542,which is solid and high temperature wear resistant，not easy to break.
  • 【ADVANTAGE】-Used to make a conical hole for a lathe center in order to make a starting point for a standard twist drill, designed to prevent the twist drill from walking..
  • 【FEATURE】-Drill accurate center holes in material prior to turning, or use as a starter bit for accurate holes..
  • 【APPLICATIONS】- Work with lathe machines and most electronic drills to drill holes in steel, iron, alum, carbon steel, brass,etc.
Check Stock

UOKRR Mini Wood Lathe for Woodworking 8" x 12" Wood Turning Lathe 1/3HP Pure Copper Motor Horsepower Benchtop Lathe Infinitely Variable Speed 750-3200rpm Multifunctional Lathe Machine

  • ...ds measuring in at 1 inches by 8 TPI, MT1 headstock spur center, an MT1 tailstock live center..
  • Infinitely Variable Speeds: This wood lathes with solid structure, runs smooth and quiet, and its very easy to adjust the speeds from 750 to 3200 rpm for your requirement by turning the knob, its a great woodworking Lathe machines fit for beginners or professional woodworkers..
  • Sturdy Construction: The body of this wood lathe made from solid cast iron, with stainless steel handle, strong and rugged construction provides long years of reliable service. Compact and small size design make it ideal for working in a limited space, has the features of high speed of low noise, slight vibration, high durability..
  • Easy & Secure Use: Distance between Centers: 12 in/30.5 cm. Swing over Bed: 8 in/20.3 cm. Face Plate: 6 in/14 cm. You can adjust the distance between centers by moving the tailstock. Two tool rests are included, which could be fixed by a whole steel handle. With elastic protective goggle will protect your eyes during work..
  • Our Service: We provide lifetime free replacement for the belt and 2 years warranty for our benchtop lathe, free return or replacement within 30 days, please feel free to contact us if there will be any problems, we will give you a satisfy....
Check Stock

Jacobs 3A 1/8\-5/8\ Heavy Duty Taper Mounted Drill Chuck w/Key

  • Cabon Steel and Durable:This mini lathe drill chuck is made of high-carbon steel£¬it's solid and durable£¬ has a long service time..
  • Wrench Style Chuck:With the design of spanner type chuck, you can adjust to the required state more efficiently and accurately, which is convenient for you to process products more efficiently and use easily..
  • Superior Workmanship:This mini lathe has high drilling accuracy, stable operation and superior performance. The advanced manufacturing workshop and the international first-class bearing are the guarantee of its quality, each process is strictly implemented, to provide you with a good experience..
  • Water-Proof and Anti-Dust:Excellent waterproof and dust-proof capability ensures that its inner core components will not be damaged by magazines and effectively extend its service life..
  • Application:It's fit for drilling machines, suitable for centering, drilling, tapping, reaming operation£¬ perfect for metal and wood lathes..
Check Stock

WenCrew Carbide Tipped Wood Turning Tools Set, 2023 Upgrade Carbide Lathe Tools for Woodturning, Lathe Rougher Finisher Swan Neck Hollowing Tools with Extendable Shafts & Full Size Cutters Inserts

  • ▶▶▶ SAY GOODBYE TO SHARPENING ANNOYANCE: Upgrade premium carbide lathe tools are made with “Rotatable” tungsten carbide tip with sharp edge. Once the edge becomes dull, you can always rotate the bit to get a new, sharper edge. “ Sharper & Luster Cutter ” can offer better strength and durability to helps maintain edge persistence, to avoid constant sharpening..
  • ▶▶▶ HIGH STABILITY: High performance stainless steel arbor and aluminum oxide handles increase stability and shock resistance. Better shock resistant wood turning tools will ensure the handle will not loosen when vibrating, which will make you get a good cutting effect in safe operation(Heavy duty wood turning tools for lathe are less likely to roll and move on the tool holder than wood tools).
  • ▶▶▶ SIMPLE OPERATEION : Carbide wood turning tools allow both beginner and experienced turners to quickly start projects by reducing the learning curve associated with traditional turning tools. And our wood lathe tools bring you outstanding results, Ideal for lathe woodworking or DIY enthusiasts.
  • ▶▶▶ FAST HANDLE SWITCHING: Excellent reliable....
Check Stock

ASZLBYM 5/8\ 36PCS Indexable Carbide Lathe Turning Tool Insert Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with CNMG 431 + WNMG 431 + TNMG 331 Indexable Carbide Turning Insert Blades

  • 【High Precision】- These carbide lathe tools with different angles can cut out any model you want with high precision. Practical lathe tools set can meet any of your cutting needs..
  • 【Free Accessories】- The metal lathe tool comes with some installation accessories: 2 wrenches, 2 socket wrenches, 7 screws and a precision blade. It is very convenient to provide you with assembly and disassembly services..
  • 【40CR Material】-These cutting tools for milling machines are made of hard 40CR material. No need to worry about it breaking or deforming during use..
  • 【Portable Storage Box】- The size of this storage box is 2.7’’*0.39’’*0.39’’ and the weight is 1.4LB. You can store them in this box in an orderly manner when you do not need to use these tools. So your Workbench will become clean and tidy..
  • 【Widely Used】- These Indexable Carbide Tools is widely used in various product processing.heavy rough cutting and other fields of processing..
Check Stock