Reviews Lathe Expanding Mandrel Set

Pen Mandrel Woodworking Pen Turning Mandrel Parts Woodworking Steel Pen Mandrel Saver Mechanical Accessory Tool Taper Shank #2 Morse Taper

  • Appropriate for many lathes: each wood turning pen mandrel is 7.95 inches in total length, 6 mm/ 0.24 inch in diameter, which is acceptable for most....
  • An adjustable tool: the package includes 1 useful woodworking pen mandrel saver with fine polished, the length of the shaft can be adjusted at will....
  • Firmly use: the mandrel for lathe is made of quality steel material, tough and sturdy, wear resistant and high temperature resistant, which can help....
  • Flexible to use: pen turning accessory is equipped with a bushing that can protect the mandrel from scratches, which can be moved easily and flexibly,....
  • Versatile uses: the lathe mandrel is designed for producing pens, with fine workmanship, which can reduce the off center turning, improving your work....
Check Stock

PSI Woodworking LBUFFSYS 3-Step Lathe Buffing System

  • Set of three 8-Inch fabric buffing wheels.
  • Tripoli bar, White diamond bar, Carnauba wax bar.
  • 2 MT heavy duty lathe mandrel which holds the buffing wheels.
  • The system requires a lathe with a minimum of 1/2HP.
  • It is recommended that the final piece be pre-treated with Danish Oil.
Check Stock

Expanding Ring Mandrel-Ring Mandrel for Lathe,Ring Stretcher,Ring Sizes(7.5-10.5) Turning and Manufacturing Rings Making

  • Easy to Use： If You’re Making More Than one Size Ring,This Lathe Rotates Your Ring so That You Can Easily Change any Size, Helping You to Improve Your Work Efficiency..
  • Premium expansion ring mandrel is precision machined to keep your ring comfortable and turns on a lathe for much longer wear and light times than regular steel.
  • The 1/2 inch base is made of high quality stainless steel material and is suitable for a variety of chucks.
  • This mandrel fits 7.5 to 10.5 ring sizes, and each step on the mandrel is half size..
  • Please apply one or two layers of tape to the steps you will be using, each ring size has extra space to accommodate the tape, this helps protect the inside of your ring from being scratched, in order to guarantee proper function..
Check Stock

Penn State Industries PKMSPN Measuring Spoon Set Kit Woodturning Project (1pack)

  • These are woodturning project kits. A LATHE IS NEEDED TO 'TURN' INTO FINISHED A MEASURING SPOON SET. Blanks, bushings, drill bit, and all other turning accessories are not included..
  • Includes (1) PKMSPN Woodturning Measuring Spoon Set Kit..
  • Each set includes measuring spoon sizes 1/4 tsp, 1/2 tsp, 1 tsp, and 1 Tbs..
  • Uses bushing set PKMSPBU. Requires 7mm drill bit (PK7-MM) and 5/8" x 5/8" x 3-1/2" minimum blank size..
  • Easy to make on a pen mandrel with 7mm tubes. Chrome ring included. The measurements are marked in the metal..
Check Stock

Penn State Industries PKSCKIT Mini Scissors Woodturning Project Kit

  • Brass tube, mini scissors parts, and clip only.
  • A LATHE IS NEEDED TO 'TURN' THE FINISHED HANDLE.
  • Blank, bushing set, drill bit and all other turning tools and supplies are not included.
  • Includes (1) PKSCKIT Mini Scissors Woodturning Project Kit in Chrome.
  • Easy project to turn on a 7mm pen mandrel or between centers.
  • Minimum blank size needed to turn is 3/4" x 3/4" x 3".
  • Scissors tuck away safely in to your turned barrel.
  • When closed, finished length is approximately 4-9/32".
Check Stock

PSI Woodworking PENPAL Portable 15-Pound Mini Penmaking Lathe

  • 1/5hp 110V variable speed motor (0-4300 rpm).
  • Tailstock uses #1 Morse Taper mount (1MT).
  • Anodized aluminum base with mounting holes and flange to mount lathe on most surfaces.
  • Includes: pen mandrel shaft with collet closer nut for mounting, mandrel saver, (5) 7mm bushings, 7mm drill bit, (2) collet wrenches.
  • Also includes: mini dust collection hood with 2" port, 2" hose clamp, and hood mounting bracket.
Check Stock

Penn State Industries PKGCALL2 Arkansas Magnum Single Reed Duck Call Kit Woodturning Project

  • Pre-formed sounding board/reed assembly parts only.
  • A LATHE IS NEEDED TO 'TURN' INTO FINISHED GAME CALL.
  • Blanks, bushing set, drill bit and all other turning tools and supplies are not included.
  • Includes (1) PKGCALL2 Arkansas Magnum Single Reed Duck Call Woodturning Kit.
  • Designed and tuned by game call professionals.
  • More range and versatility than double reed calls.
  • Minimum blank size needed to turn is 1-1/2" x 1-1/2" x 4".
Check Stock

Penn State Industries PKMSCUP Measuring Cup 4pc Set Woodturning Project Kit (1pack)

  • This is a woodturning project kit. A LATHE IS NEEDED TO 'TURN' INTO A FINISHED MEASURING CUP SET. Blanks, bushings, drill bit, and all other turning accessories are not included..
  • Includes (1) PKMSCUP Measuring Cup 4pc Set Woodturning Project Kit.
  • Each set includes the following measuring cup sizes: 1/4 cup, 1/3 cup, 1/2 cup, 1 cup.
  • Uses bushing set PKABBU. Requires a 7mm drill bit (PK-7MM) and 3/4" x 3/4" x 3-3/8" minimum blank size..
  • Easy to make on a pen mandrel. 'Turn' a must-have kitchen essential. Each set includes four of the most common measuring cup sizes used for cooking and baking.
  • 1/4 cup, 1/3 cup, 1/2 cup, and 1 cup. These cups are plated with durable, food safe stainless-steel inside, and chrome plated on the outside. Easy to hand-wash. The measurements are etched on the side for easy identification..
Check Stock

Penn State Industries PKGCALL23 Arkansas Magnum Double Reed Duck Call Kit Woodturning Project (Smoke)

  • Pre-formed sounding board/reed assembly parts only.
  • A LATHE IS NEEDED TO 'TURN' INTO FINISHED GAME CALL.
  • Blanks, bushing set, drill bit and all other turning tools and supplies are not included.
  • Includes (1) PKGCALL2 Arkansas Magnum Single Reed Duck Call Woodturning Kit.
  • Designed and tuned by game call professionals.
  • More range and versatility than double reed calls.
  • Minimum blank size needed to turn is 1-1/2" x 1-1/2" x 4".
Check Stock

Nova 6050 1-1/2" Multi Project / Duck Call Jaws Jaw Set

  • Pre-formed sounding board/reed assembly parts only.
  • A LATHE IS NEEDED TO 'TURN' INTO FINISHED GAME CALL.
  • Blanks, bushing set, drill bit and all other turning tools and supplies are not included.
  • Includes (1) PKGCALL23 Smoke Arkansas Magnum Double Reed Duck Call Woodturning Kit.
  • Designed and tuned by game call professionals.
  • Sound like a flock of mallards ranging from high up to a feeding call.
  • This double reed style takes more air to blow and doesn't have as much range as single reed models (PKGCALL2), however it have a "sweet spot" that sounds more realistic to passing ducks.
  • Minimum blank size needed to turn is 1-1/2" x 1-1/2" x 4".
Check Stock

TEXALAN Woodworking Drill Chuck with 2 Morse Taper Mount 5/8 INCH

  • [Installation]: This 3-Jaw Chuck will mount into the headstock or tailstock of any lathe that accepts #2MT accessories.
  • [Packing]: Includes the 5/8 inch Drill Chuck, #2 Morse Taper Arbor, and Jaw Tightening Key.
  • [Application]: Great for holding drill bits, small turnings, dowels, pen mandrel shafts, and much more.
  • [Usage]: Tightens with a Chuck key for excellent grip. Removes easily with knock out bar.
Check Stock

WEN LA164K 5/8-Inch Keyed Drill Chuck with MT2 Arbor Taper.

  • Holds drill bits, pen mandrel shafts, and workpieces up to 5/8 inch in diameter.
  • Easily open and close the three chuck jaws using the included key.
  • Compatible with any MT2 drill press, lathe, or mill.
  • Installs easily with the simple tap of a rubber mallet.
  • Designed for use with WEN models 3424, 3424T, 3427, 34018, 34027, 34034, 4214, and 4225.
Check Stock

BestEquip Indexable Carbide Lathe Tools 1/2" Metal Lathe Cutting Tools 7 Pcs/Set Indexable lathe tools Super-Hard 40CR Lathe Bits Carbide Lathe Tool for Lathe Black Compact and Portable

  • Indexable &Sharp Inserts: 90°, 93°, 55°&95°carbide lathe inserts allow this lathe threading tool cutting with more flexibility and utility. Sharp,straight and even ccmt inserts can ensure high precision cutting..
  • Super-Hard 40CR Body: 40CR material of these lathe cutting tools has much higher hardness, so stable cutting is achieved due to its superior toughness and crack resistance..
  • Additional Subassemblies: This Lathe tool set comes with 2 installation wrenches in different type:3mm Allen wrench and T15 box spanner. A set of assembly screws and one 95°CCMT09T304 blade are free to provide much convenience to lengthen the service life of these metal lathe cutting tools..
  • Extensive Use: These metal lathe tools can be applied to digital-controlled lathe with various sizes, processin....
Check Stock