ARES 43011-1/4-Inch Drive Micrometer Torque Wrench - Dual Torque Scales - 40-200 in/lbs (4.52-22.6Nm) - Click Torque Wrench - Ultra Smooth Torque Dialing with High Visibility Laser Etched Markings
- ITEM SPECIFICATIONS: The ARES 1/4-Inch Drive Micrometer Torque Wrench features dual torque scales with in/lbs and newton meters readings and ranges of 40-200 in/lbs and 4.52-22.6 Nm with an accuracy tolerance of ±3%. The ultra smooth handle rotation with high visibility laser etched markings makes it easy to adjust your specified torque. Designed with longevity in mind, all of our torque wrenches are calibrated before shipping and meet ANSI standards..
- DESIGN CONSIDERATIONS: This click type torque wrench is designed with ultra smooth torque dialing, and the quick torque change mechanism features a spring loaded pull down knurled collar that secures the torque setting with a positive lock mechanism. The quick release mechanism helps you dial in your torque setting effortlessly and instantly. The click type design alerts you when torque is reach and helps to prevent over-torquing..
- CONVENIENT STORAGE: This click type micrometer torque wrench comes with a high quality storage case, so you'll always have the perfect place to keep it while it's not in use, and you'll never have to search for it when you need it. This torque wrench features a black nickel finish on the shaft and ratchet, and a red anodized finish on the aluminum machine knurled handle. The ....
Check StockLuckyHigh Precision Micrometer Holder Stand Cast Iron Base Rubber Lined Jaws Inspection Fixture
- Micrometer holder base is made of cast iron. The clamp is equipped with rubber pad to avoid damaging the instrument and protect instrument in the process of clamping..
- Rubber lines jaws are 1.5" wide, will open to 0.75" (18mm)..
- Micrometer Holder Stand fit for most inside and outside micrometers..
- Micrometer Holder Stand Jaws can rotate 50 degrees forward and 30 degrees back..
- Micrometer Holder Stand is mainly used for clamping 0-4" micrometer to provide high measurement stability..
Check Stock50mm Caliper Calibration Rod, Stainless Steel Calibration Bar for Accurate Measuring
- STAINLESS STEEL MATERIAL: The outside micrometer is made of premium stainless steel, so it is not easy to deform and is durable in use..
- HIGH QUALITY: The outside micrometer standard caliper is 100% brand newbrand new and has a high quality..
- VARIOUS SPECIFICATIONS: The outside micrometer standard caliper is a professional measuring tool, there are various specifications for your choice..
- CONVENIENCE: The stainless steel outside micrometer calibration bar has reasonable size and light weight, which is convenient to use and carry..
- MAIN APPLICATION: The stainless steel outside micrometer calibration bar is mainly used for calibrating micrometers..
Check StockFowler 54-220-777-1, IP54 Digital Micrometer Head with 0-1\/25mm Measuring Range
- Micrometer Head: For general purpose measuring applications.
- carbide-tipped measuring face with an accuracy of 0.00012″/0.003mm for precise readings.
- Precision Measurements: This digital micrometer with a 0-1"/25mm range has a friction thimble that provides smooth and quiet performance and is suitable for one-handed operation.
- Easy to Use: Digital micrometer head features an LCD that performs direct inch/metric conversions and has a switchable resolution of 0.00005"/0.001mm.
- meets IP54 specifications for dust and water protection.
- Data Output: Digital micrometer with RS-232 output that provides the ability to export readings to a computer (cable not included).
- Set Includes: Fowler micrometer head, a spare battery, and a battery removal tool.
Check StockMetric Micrometer
- 【Outside Micrometer Set】0.0001" precision micrometers are available in a variety of sizes:0-1", 1"-2", 2"-3", 3"-4", with 3pcs benchmark rods and....
- 【Thickened Carbide Head】 The outer micrometer is made of tungsten steel and hard alloy, and surface powder coated baked finish, which is more....
- 【Ratchet-stop Thimble Design】The ratchet-stop thimble on the micrometer tools spindle provides constant force, prevent screwing too tight, make....
- 【Multi-purpose】Metric Micrometer are widely used for precise measurement of length, diameter or thickness..
- 【Strong Warranty】 Ruitool are confident with the quality of our Outside Micrometers Set that we offer a one year manufacturer warranty when....
Check StockStarrett 949 Case only for Electronic Outside Micrometer NO.3734/734 Series
- The Starrett 949 Deluxe Padded Case is sized to store and protect a single outside electronic micrometer that measures to 1 inch (25 mm)..
- The case has rounded edges, is made of steel with a vinyl covering, and has fitted foam padding to house an electronic micrometer, a CR2450 battery, and adjustment wrench (sold separately)..
- The case is an accessory for use only with a Starrett micrometer that measures 0-1” (25 mm)..
- Fits Model Series 731, 733, 734, 3734, 756, 788, 733.1, 756.1 and 788.1 (Micrometer sold separately)..
Check StockFowler 52-240-006-1 Outside Inch Micrometer with 5-6 Measuring Range
- Micrometer: The Fowler series of outside micrometers features exceptional quality and accuracy with a ratchet thimble.
- Accurate Readings: Micrometer has microfine 0.0001" graduations and accuracy of ±0.00025".
- carbide-tipped anvil and spindle have 0.256" measuring....
- Easy-to-Read Display: Distinct figures and graduations on the micrometer permit easy reading that allows for measuring with extra ease and comfort.
- Durable Construction: Hardened, precision-ground, and carbide-tipped anvil and spindle with microfine graduations.
- Set Includes: A Fowler micrometer with ratchet thimble, a standard, a wrench, and a fitted case.
Check StockPush Button Safety with Pin and Spring, Steel Construction (Stainless-)
- All the features of the Bench Rest Seater Die plus a Micrometer for adjusting bullet seating depth.
- Micrometer allows fine-tuning in either direction.
- Gradations at increments of .001″ are clearly marked.
- Eliminates much of the trial and error that was once associated with seating accurate rounds.
- Bright, white markings make micrometer easy to read.
Check Stock0.1mm High Precision Ocular Micrometer+0.01mm Stage Micrometer Microscope Micrometer
- 0.01mm Stage Micrometer Microscope Micrometer.Material: optical glass.Size: 75mm x 25mm x 1mm. Total length of scale is 1mm that is subdivided into 100 divisions，each division is 0.01mm.
- 0.1mm High Precision Ocular Micrometer. Material: optical glass. Div.x: 0.1mm；y: 0.1mm，10mm/100.
Check StockLyman Pro Micrometer Seating Die - 9mm, Stainless Steel
- Our Micrometer Seating Die gives you exact bullet seating length and minimal run-out.
- Has a micrometer adjustable seating head for precision bullet seating length.
- If you want to change your bullet seating depth a few thousandths of an inch, simply turn the micrometer head to the required setting.
- Its floating bullet seating punch centers the bullet on the case and eliminates excessive run-out.
- Made of corrosion resistant stainless steel which protects it from rust and keeps it looking like new for a lifetime of use.
Check StockMitutoyo - 516-930-26 Steel Rectangular Micrometer Inspection Gage Block Set with Optical Parallel, ASME Grade 0, 0.0625 - 2.0\ Length (9 Blocks)
- Micrometer inspection gage blocks are sized for use with a Mitutoyo Micro Checker (sold separately).
- Grade 0 gage blocks supplied with a Mitutoyo certificate of inspection that the blocks meet American Society of Mechanical Engineers (ASME) B89.1.9.
- High-carbon, high-chrome steel provides high hardness and wear-resistance.
- Nominal length (in inches) indicated with laser-etched, black characters.
Check StockCDI 6004MFRPH Torque 3/4-Inch Drive Micro-Adjustable Torque Wrench
- Specifications: The CDI 3/4-Inch Drive Micrometer Adjustable Torque Wrench features dual scales with an English Range of 100-600 ft. lbs. and a Newton....
- Size: The overall length of the torque wrench is 42 inches. The width across the torque head is 2.5 inches and the depth of the head is 2.10 inches.....
- Features: Quick release button that provides good socket retention as well as easy socket removal. Easy-to-read laser marked scales which makes the....
- Performance: Rugged, industrial strength torque wrenches able to withstand the rigors of professional use. Meets or exceeds ASME standards, ISO 6789....
- Rugged Protection: Includes a blow-molded case to protect the wrench when not in use.
Check Stock
Premium Outside Micrometer Set 0-4\ / 0.0001\ (0-1\/1-2\/2-3\/3-4\) Precision Machinist Tools w/Carbide Tips, Standards, Ratchet Stop
- HIGH-PRECISION MEASURING TOOL SET: Set includes a 4 carbide outside micrometers, calibration standards, and adjusting wrenches packaged neatly in a padded hard shell case. Every order you will receive a set of 0-1" / 1-2" / 2-3" / 3-4" outside micrometers with microfine Graduations: 0.0001" and Accuracy: ±0.0001" for precise readings every time.
- FRICTION/RATCHET-STOP THIMBLE: Each micrometer has a metal ratchet-stop thimble with a speeder knob to reduce the time it takes to open and close the micrometer. To Prevent over tightening the constant-force mechanism stops the micrometer’s spindle from tightening once it contacts the surface of the measured object.
- EXCLUSIVE RED COLOR FINISH: We believe your tools should work great and be something you're proud to display. That's why we have designed this exclusive Direct-Reading Vernier Scale Micrometer set unlike any of the others. The red textured design and satin chrome thimble helps resist rust, reduce glare and are easily identifiable in your shop.
- WIDE VARIETY OF USES: This Outside Micrometer Set is Perfect for DIY, Hobbyists, CNC Machinists, Fabricators, Automotive Mechanics, and Inspection Tools. Sandor Tools Outside Micrometers help you measure the outside dimensions (OD) of raw materials, whole wo....
Check Stock
