Reviews Laser Cutting Service

ENJOYWOOD CEL-E10 Laser Engraver, 50W Laser Engraving Cutting Machine,10-15W Laser Output Power Laser Engraving Machine,0.06 * 0.06mm Double Compressed Spot Laser Engraver for Wood and Metal Etc

  • Double Compression Spot Coupling Technology: laser engraver laser power is 10-15W, ultra fine compressed laser spot is reduced to 0.06*0.06mm, Other 10W Machine laser focus area is 0.06*0.08mm. The smaller the laser spot, the greater the energy of the laser. Laser could control laser beam more accurately to 0.01mm. Cutting and engrving more precision..
  • Fast Engraving and Cutting: The laser engraving machine burning Temperature is up to 1200℃. Engraving & cutting speed is 300% higher than that of ordinary models.Engraving speed up to 11,000mm/min.ENJOYWOOD laser engraver with 50mm focal length, Cutting depth increased by more than 20%,Other 10W Machine With 30mm focal length..
  • Vivid Colors Engraving: Power 10-15W optical power can oxidize the metal surface. Oxidized metals exhibit rich colors.By controlling the speed, power and line spacing you can have color laser engraving..
  • The New Filter Panoramic Glass Eye Protection Design: Plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light, you do not need to wear goggles, you can also watch laser engraving. The emergency stop button and reset switch are more convenient and safe to use.Wide Compatibility: LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, supp....
Check Stock

ZBAITU C80 80W Laser Module Kit, 10W Optical Diode Laser Module for Engraver Cutter, 10W Laser Head for DIY Metal Wood Leather Acrylic Glass, Compatible Most Laser Engraving Cutting Machine, 12V

  • 【Wide Compatibility】The attached adapter cable and dovetail slider can help the ZBAITU C80-EAIR laser module to be compatible with most laser engraving and cutting machines on the market, also compatible with other machines that use 12V input voltage, you don't need to repurchase a laser engraving machine to improve engraving and cutting efficiency, high cost performance.
  • 【Air Assist】ZBAITU C80-EAIR Air assist laser module can blow away scrap and smog during engraving and cutting, boost effect, engraving and cutting more refined, reduces yellow smoky marks on the edges of the cutting line, the most important is to reduce the pollution to the lens to ensure the service life of the laser module.
  • 【High Power】The ZBAITU C80 EAIR laser engraving module has a 10W laser output power, it can quickly engrave metal, wood, leather, glass, and acrylic etc. The C80 EAIR laser cutting machine module is also excellent on cutting function, it can cutting 5mm plywood in one pass.
  • 【Ultra Accuracy】The newest FAC technology compresses the laser point of the ZBAITU C80 EAIR laser module to 0.08mm, the lines for engraving....
Check Stock

WIZMAKER L1 Laser Engraver, 20W Output Power Laser Cutter, High Accuracy Laser Engraving Machine, 120W Laser Cutting Machine with Air Assist, Lazer Engraver for Wood and Metal, Acrylic, Leather

  • 【Faster Speed & High Accuracy】 Upgraded 20-24W Laser module and 32 bit motherboard support faster cutting and engraving speed. Ultra-fine laser focus is reduced to 0.06 x 0.06mm, provide you a higher accuracy engraving artwork. WIZMAKER laser engraver can cut 10-12mm paulownia wood and 8-10mm acrylic in one pass, and up to 20mm wood, 15mm acrylic, 0.05mm metal steel. Also can directly engrave metal, ceramics, glass, the engraving and cutting speed is 40% higher than the ordinary model..
  • 【Solid & Easy to Install】 The sturdy and easy installation all-aluminum alloy anodized structure, and all-metal wheel, shaft, and enclosed synchronous belt makes the laser module still ensure motion stability under high-speed up to 400mm/s, improves the accuracy of engraving. And the entire structure of laser cutter has been designed for quick assembly, and the assembly can generally be completed within 10-25 minutes..
  • 【Safe & Longer Service Life】 The red emergency button on the laser engraving machine allows you to stop the operation at any unexpected situations. The laser eye shield on laser module can effectively filter 97% of UV rays, effectively protectin....
Check Stock

ATOMSTACK Honeycomb Working Table F1 for Laser Engraving and Cutting Machine, Honeycomb Working Panel for Fast Heat Dissipation and Desktop-Protecting, Compatible with All Laser Cutter,380x284x22mm

  • Double Protection Desktop: ATOMSTACK honeycomb board adopts scientific and reasonable honeycomb height size design to prevent laser burning workbench or desktop. At the same time, it is equipped with anti-cutting metal protective backing board, which can further protect the desktop from laser damage. It is very suitable for various styles. CO2 or diode laser engraving machine..
  • Anti-slip metal clamps for fixing:This laser cutting honeycomb table is all made of metal, high-precision CNC processing, and it has fixture design, suitable for fixing various sizes of carvings, preventing the objects from shifting to the exact position during the carving process, and preventing the carvings from deforming..
  • Fast heat dissipation:The size of the honeycomb laser bed is scientifically calculated, which can make the carving object get fast heat dissipation during the carving process, and the cutting edge is more refined, while avoiding the burning of the carving object due to excessive temperature..
  • Cutting Through Observable Design: When the laser cuts through wood or acrylic, the metal plate at the bottom of the honeycomb table will emit a bright light, which means that the cutting has penetrated. Solve the problem that ordinary engraving machine is difficult to ....
Check Stock

10W Output Laser Engraving Machine, JICCODA L1 High Accuracy 0.05 * 0.1mm Compressed Spot Laser Cutter Mini CNC Machine with 5.0 Bluetooth Technology Laser Engraver for Wood and Metal

  • [Upgraded 10W Laser mould] 10W JICCODA L1 laser engraver adopts the latest double-layer 5.5W laser technology , which can reach the speed of laser cutting up to 10,000mm/m and cut 10mm thickboard and 5mm acrylic plates at a single pass. The service of the laser module up to 10,000 hours in regular temperature..
  • [Built-in dual motors] Comparing the most laser machine has only one motors ,JICCODA L1 cutter machine master 2 motors inside laser frame in order to keep the laser engraver machine more stable while it engraving..
  • [Ultra-accuracy engraving compressed spot & fast laser cutting] 0.05*0.1mm ultra-accurate compression spot can achieve your varieties laser cutting and laser engraving for wood and metal, DIY creation activities and bring you a distinct grain pattern,vivid picture and clear-cut engraving and cutting experience. FR4 double-sided main board with glass fibre material strength the precise of our mini cnc machine..
  • [Easy assemble]The construction of high-strength aluminum alloy and ABS material makes the JIOOCDA L1 laser machine robust and stable. The laser cutting engraver has a disassembled modular design with the stable performance of the drive plate and the laser tube core with heat dissipation function. The laser engraver and cutting m....
Check Stock

ZBAITU A40 Laser Engraver, 80W Laser Engraving Cutting Machine, 10W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • ...er has 80W machine power and 10W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU A40 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU A40 is equipped with ZBAITU C80 laser module, real 10W laser output power greatly increase engraving and cutting speed.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU A40 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, A40 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU A40 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10, and also support macOS system (LightBurn), ....
Check Stock

SCULPFUN S9 Laser Engraver, 90W Effect High Precision CNC Laser Engraving Cutting Machine, High Energy Laser Cutter for 15mm Wood, 0.06mm Ultra-Fine Fixed-Focus Compressed Spot, Expandable Area

  • High Energy Cutting & Ultra-Fine Laser Beam – S9 uses the latest 5.5W laser beam shaping technology diode laser, it has an ultra-fine 0.06*0.06mm sharp compressed laser focus spot and 0.01mm engraving accuracy. With super cutting penetration and precision, he can cut up to 15mm thick wood, 10mm acrylic, 10mm plywood, engraving ceramics and stainless steel..
  • Safety Protection Design – Laser filter cover can filter 98% of UV light to protect your eyes, no need to wear goggles to watch laser engraving and prevent pets from catching the laser spot. Equipped with a power switch to easily turn on, or turn off the machine in case of emergency. A4 size steel pad protects the table from laser damage and isolates fire hazards..
  • Extensive Compatibility & Uses – Compatible various mature engraving software, such as LaserGRBL, LightBurn, Benbox, GrblController, LiteFire, supports PWM mode engraving, supports Windows system, Apple system (LightBurn), and engraving file format support JPG, PNG, DXF, SVG, G-code, NC, BMP, etc. Engraving materials: wood, paper, cardboard, plastic, PCB board, aluminum oxide, stainless steel, ceramic, stone, etc. Cutting material: wood, acrylic, plywood, fabric, bamboo, plastic board, etc..
  • Expandable Engraving Area & Quality Assura....
Check Stock

SCULPFUN S30 Pro Laser Engraver with Auto-Controlled Air Assist System, 84W Laser Engraving Cutting Machine, 10W Optical Power Laser Cutter for Home Family DIY, Ultra-Thin Carving (S30 Pro Engraver)

  • ...trolled during engraving, and the engraved pattern will be smoked into a fuzzy fog. The S30 Pro is equipped with an air assist 32-bit motherboard and a control-type air pump, which can intelligently control the air-assist switch during engraving through the LightBurn software M8 button, this makes the engraving and cutting very clean, and makes the finished works more high-quality..
  • ▶【Built-in High Pressure Air Assist Nozzle】 - S30 Pro laser cutting machine is equipped with advanced high-pressure air-assisted metal nozzle, which can generate high-pressure airflow under the air pump, greatly improving the cutting efficiency, and the cutting speed is more than 5 times faster than that without air assistance. The powerful airflow blows away the residue, making the cut surface very clean and smoothy..
  • ▶【High Precision Ultra-thin Linear Rail Engraving】 - S30 Pro laser engraver adopts ultra-thin laser shaping technology, the laser focus is as thin as hair, very powerful for engraving. Besides, the carving machine adopts the most accurate 0.005mm industrial linear guide, which greatly improves the engraving accuracy, and there is no wave line when engraving. When comparing small cutting details, the S30 does not have the wavy pattern that appears ....
Check Stock

ZBAITU M37 Laser Engraver, 40W Laser Engraving Cutting Machine, 5.5W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

  • ...t power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU M37 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
  • 【Excellent Laser Module】Laser engraving cutting machine ZBAITU M37 is equipped with ZBAITU C40 laser module, 5.5W laser output power can engraving and cutting fast enough.
  • Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
  • The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
  • 【Solid Structure & Easy Installation】All metal frame design makes ZBAITU M37 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, M37 laser engraver cutter entire structure designed as quick assembly.
  • 【Wide Compatibility】High power ZBAITU M37 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, sup....
Check Stock

Official Longer RAY5 10W Higher Accuracy Laser Engraver, 3.5\ Touch Screen, 0.06 * 0.06mm Laser Spot, 60W DIY Laser Engraving Machine for Wood and Metal, Acrylic, Leather

  • 10W OUTPUT POWER: The Longer RAY5 laser engraver adopts diode laser engraving technology, with an 10w output power. This engraver has 0.06*0.06mm high energy diode laser beam and strong cutting penetration and precision. It also has a large engraving range of 410x410mm (16.14 x 16.14 inches). With the latest 32-bit built-in chip, it can quickly realize cutting and carving on acrylic board, metal, wood, stainless steel, cylinder, rubber, leather, paper, fabric, ceramics, bamboo, PCB board, etc..
  • 5 PROFESSIONAL SAFETY PROTECTIONS: The Longer RAY5 laser engraver is always keeping safe. For this purpose, we explore quadruple protection mode. ① We pioneered flame protection technology, if a flame is found, the machine will stop and make a sound to indicate abnormal conditions. ② The laser will stop engraving when a movement occurs. ③ The laser module stay around for more than 15s will stop working. ④ RAY5 laser cutter has a laser protection cover, which can protect your eyes from UV rays..
  • 3.5"USER-FRIENDLY UIINTERFACE TOUCHSCREEN & 4 CONNECTION METHODS: The Longer RAY5 laser cutter has a built-in 3.5" color touchscreen with a user-friendly interface. You can directly operate through the touchscreen, including using a variety of connection meth....
Check Stock

Honeycomb Laser Bed 37.4\x 19.68\x 0.87\

  • ✅✅✅【Soulmate for laser engraver】Nivill honeycomb working table is indispensable part of laser cutting and engraving machines. It helps to extend the life of your laser engraver desktop, make your engravings more precise and improve the quality of your engravings..
  • ✅✅✅【Durable Material & Fast Heat Dissipation】The honeycomb panel is made of steel, making it more stable, durable, and rust-proof. The flat and smooth honeycomb hole design accelerates the emission of smoke so that materials such as wood are not easily blackened by smoke, and the engraving effect is better..
  • ✅✅✅【Multiple Protection】 In laser cutting operation, honeycomb plate is used to prevent laser reflections from damaging the laser head during the cutting process and prolong the service life of the laser. The honeycomb workbench set is equipped with an aluminum panel, which can protect your desk from laser damage. Also come with 4 corner protectors to prevent your hands from being in any potential danger..
  • ✅✅✅【High-Efficiency Engraving & Quick Measurement】 Honeycomb panel can cut wood, acrylic, and other materials, the wood edges are neat and clean, and the 9mm aperture size can be more effectively arranged during the engraving process Smoke, helps t....
Check Stock

ATOMSTACK A20 PRO Laser Engraver, 130W Laser Engraving Cutting Machine with Air Assist Kits, 20W Output Power 0.08 * 0.1mm Compressed Spot, Laser Cutter and Engraver Machine for Metal Steel

  • ...e promotions" and then select "Add to cart" to enjoy buy one get one free. If you order an Atomstack A20 PRO laser cutter on your mobile phone, click on "Special offers for this item" and you will receive a free 380 mm x 284 mm laser honeycomb table..
  • THICKEST CUTS BY 20W HIGHEST LASER POWER: Atomstack A20 Pro laser cutting machine is the world's first 20W optical power diode laser engraver. With the latest generation of four 6W laser coupling technology, it can cut off 15-20mm thick tungsten board as well as the 8-15mm thick black acrylic board with only ONE PASS, and even cut the 0.05mm thick stainless steel sheet..
  • MORE PRECISE ENGRAVING: Atomstack laser cutting & engraving machine with a 32-bit motherboard works more smoothly and stable. The advanced built-in 256-bit color scale with 0.08 * 0.1mm laser spot area makes the engraved pattern more contrast and more obvious. The finished pattern is like sketching on paper. the effect is more delicate and natural in the overlay of black and white..
  • SMARTER ENGRAVING & CUTTING: The ATOMSTACK APP is connected to the A20 pro laser cutting machine and supports both Android and Apple phone systems. Also, it is equipped with a controller and an emergency stop button so that you can engrave completely offline. Y....
Check Stock

ATEZR P10 Combo 60W Laser Engraver with Air Assist& Rotary Roller, 430 * 430mm Working Area, 10W Laser Power CNC Laser Engraver for PC/Mobile, Hypersonic Laser for Wood/Metal/Acrylic etc.

  • ... Laser Technology】ATEZR P10 60w Laser Engraver has 10W laser output power. The laser focus area is reduced to 0.08*0.06mm, which can cut 10mm wood board and 6mm black acrylic at one time.ATEZR P10 laser cutter can cut up to 18mm wood board and 30mm acrylic board. It can combine precision engraving and high energy cutting. The working life of the laser module can reach 30,000+ hours.
  • 【Multiple Connection Modes】ATZER laser cutting machine has 4 connection modes. You can not only connect to PC, mobile phone/tablet APP, but also connect to touch screen and WLAN. You can download APP from App Store/Google Play Store and use your mobile device to take photos and upload to APP directly to start engraving. ATZER laser cutting and engraving machine will bring you a new DIY control experience.
  • 【Customer Service】We will provide you with a 30-day no-questions-asked money-back guarantee, 2-year warranty for quality issues and lifetime technical support for your Atezr products. You can always contact our support team for a fast and effective solution. Customer service is available 24/7 online.
Check Stock