Reviews Large Volume Pcr Tubes

Aluminum Cooling Block - PCR Plate Cooler ，96-Well for 0.2 mL Tubes, Strips or 96-Well Plates (96-Well)

  • 【Product Specifications】: 96-well aluminum freezer box, used for 0.2ml PCR tubes or 96-well boards, with silicone rubber cover..
  • 【Material】: Made of aluminum, high-efficiency conduction of heat.
  • with a color oxygen layer on the surface, abrasion resistant.
  • the freezer box after being frozen can stay cold for a long time at room temperature of 30℃..
  • 【Efficient use:】Make the laboratory solution cool quickly, so that the PCR reaction liquid or enzyme liquid can be kept at a low temperature, preventing degradation during operation..
  • 【With broad applicability】：Suitable for all PCR tubes, preventing PCR tubes from tilting or popping out.With a reasonable distance between wells, PCR tubes and lids wouldn’t affect each other..
  • 【Improve efficiency】:This product can minimize operating errors and bring more convenience for PCR operators..
Check Stock

Simport Amplitube T320-2N Polypropylene PCR Reaction Tube Strip with Attached Flat Cap, 8 x 0.2ml, Natural (Pack of 125)

  • 【Specifications】：PCR 0.2ml Thin Wall With Flat Cap，Hinged Flat Caps Attached,DNase/RNase Free,125 Strips/Box..
  • 【Ultra-thin pipe wall】：Super fast conduction of temperature. Commonly used in general and real-time PCR amplifiers in the market..
  • 【Good transparency】: Mirror surface design of the PCR tube cap. Fully considered the optical factor, ensuring the accuracy and reliability of the experimental results..
  • 【Well sealed】: Excellent sealing performance of the pipe cap. Easy to open and close. In the case of a suitable hot lid, the loss of reaction volume is at 5%.No distortion at high and low temperatures. -80℃~121℃..
  • 【Quick delivery】:The PCR tubes are packed in boxes after being thoroughly checked and will be shipped by amazon, you will receive them very soon!.
Check Stock

Aluminum Cooling Block - PCR Tubes Cooler,24 Wells+36 Wells(for 1.5ml/2ml + 0.2ml Tubes)

  • 【Product Specifications】:24 Wells+36 Wells for 1.5ml/2ml + 0.2ml Tubes, with silicone rubber cover..
  • 【Material】: Made of aluminum, high-efficiency conduction of heat.
  • with a color oxygen layer on the surface, abrasion resistant.
  • the freezer box after being frozen can stay cold for a long time at room temperature of 30℃..
  • 【Efficient use:】Make the laboratory solution cool quickly, so that the PCR reaction liquid or enzyme liquid can be kept at a low temperature, preventing degradation during operation..
  • 【With broad applicability】：Suitable for all PCR tubes, preventing PCR tubes from tilting or popping out.With a reasonable distance between wells, PCR tubes and lids wouldn’t affect each other..
  • 【Improve efficiency】:This product can minimize operating errors and bring more convenience for PCR operators..
Check Stock

96 Wells PCR Carrying Box PCR Tube Rack ONLY for 0.2ml Micro-Tubes, 8 x 12 Array (Yellow)

  • Material: PP. FIt for 0.2ml PCR Tubes, NOTE: ONLY FOR 0.2ML PCR TUBES/PLATE. Not suitable for any CAPSULES.
  • Each Weight: 90g, Package: 1x PCR Carrying Box.
  • Note: This item only for 0.2ml PCR tubes, Do not use for other purposes.
  • Notice: the top diameter is 5.8mm of holes, the bottom diameter is 4 mm of holes, the hole depth is 7.7mm for itself, the hole max depth is 14.8mm for the rack. If you encounter any problems, please feel free to contact us, we will definitely handle it properly for you.
Check Stock

DNA Fingerprinting Electrophoresis Lab Activity - The Curated Chemical Collection by Innovating Science

  • This kit comes complete with 50pcs purification columns as well as 50pcs 2mL collection tubes.
  • Sample: 1-4mL of cultured bacterial cells, Yield: up to 20 microgram of plasmid.
  • For plasmid DNA isolation, gel extraction and PCR product purification.
Check Stock

80-Well Polypropylene Microcentrifuge PCR Tube Rack [5 Assorted Colors]

  • Set of five 80-well microcentrifuge PCR tube racks accommodates 0.5mL, 1.2mL, and 2.0mL microcentrifuge tubes or PCR tubes.
  • 16 x 5 configuration ideal for freezing, storage, transport, and benchtop use.
  • Autoclavable at 250 degrees F and 15psi for 15 minutes.
  • Includes five trays in assorted colors, every well on the tray is numbered.
Check Stock

Bio Plas 0061 Assorted Polypropylene Microcentrifuge PCR Tube Rack, 80-Well, Pack of Five

  • Set of five 80-well microcentrifuge PCR tube racks accommodates 0.5mL, 1.2mL, and 2.0mL microcentrifuge tubes or PCR tubes.
  • 16 x 5 configuration for freezing, storage, transport, and benchtop use.
  • Autoclavable at 250 degrees F and 15psi for 15 minutes.
  • Racks are 9" long, 2-1/16" deep, and have 10.5mm well diameter.
Check Stock

IBI Scientific IB47010 Gel/PCR DNA Fragment Extraction Sample Kit for 4 Preparations

  • Kit contains (4) DF columns, (4) 2mL collection tubes, 3mL DF buffer, 1mL wash buffer (4mL add ethanol) and 1mL elution buffer.
  • Sample: up to 300mg agarose gel slice and up to 100 microliter PCR product or other enzymatic reaction.
  • expectant yield is 80-90 percent for gel extraction and 90-95 percent for PCR clean-up.
  • Applications: PCR fluorescent or radioactive sequencing, restriction digestion, DNA labeling, ligation.
Check Stock

8-Strip CAPS;for PCR Tubes & Plates, Flat Cap; Certified, 125 Strips/Bag,

  • Strips can be sterilized by autoclaving for 20 minutes at 121 °C..
  • Suitable for both endpoint PCR and qPCR applications.
  • Ultra thin wall design for efficient heat transfer.
  • Package: 200 Strips 0.2ml PCR Tubes and Flat Caps.
Check Stock

HYUNDAI MICRO Real Time qPCR 8-Strip Tube 0.1mL Clear HBQ001CFO8D

  • Optimized Material for PCR (Mixed PP) The Combination of PP materials containing our know-how makes the excellent heat conductivity and high efficiency of amplification. It is also stable at low and high temperatures of -80℃~121℃..
  • Soft Opening and Closing / Excellent Sealing HM PCR tube has a very smooth opening and closing sensitivity. Existing PCR tubes with hard lids that frequently caused the fingertip pain. Its improved lids solve this problem and no evaporation with prefect sealing..
  • High Performance / Reasonable Price Production and packaging at the latest automation facilities ensure stable quality. It is also significantly cheaper and more capable than the products of famous foreign brand..
  • RNase/DNase Free Non-Pyrogenic Endotoxin Free.
Check Stock

MUHWA 1000pcs PCR Tube with Flat Cap, 0.2 ml Microcentrifuge Tube, PCR Reaction Tube (0.2ml)

  • Optimized Material for PCR (Mixed PP) The Combination of PP materials containing our know-how makes the excellent heat conductivity and high efficiency of amplification. It is also stable at low and high temperatures of -80℃~121℃..
  • Soft Opening and Closing / Excellent Sealing HM PCR tube has a very smooth opening and closing sensitivity. Existing PCR tubes with hard lids that frequently caused the fingertip pain. Its improved lids solve this problem and no evaporation with prefect sealing..
  • High Performance / Reasonable Price Production and packaging at the latest automation facilities ensure stable quality. It is also significantly cheaper and more capable than the products of famous foreign brand..
  • RNase/DNase Free Non-Pyrogenic Endotoxin Free.
Check Stock

Hyundai Micro Real time PCR Tube 0.1ml, White Non-Stick Flat Cap 8-Strip, Pack of 120

  • Optimized Material for PCR (Mixed PP) The Combination of PP materials containing our know-how makes the excellent heat conductivity and high efficiency of amplification. It is also stable at low and high temperatures of -80℃~121℃..
  • Soft Opening and Closing / Excellent Sealing HM PCR tube has a very smooth opening and closing sensitivity. Existing PCR tubes with hard lids that frequently caused the fingertip pain. Its improved lids solve this problem and no evaporation with prefect sealing..
  • High Performance / Reasonable Price Production and packaging at the latest automation facilities ensure stable quality. It is also significantly cheaper and more capable than the products of famous foreign brand..
  • RNase/DNase Free Non-Pyrogenic Endotoxin Free.
Check Stock

Mini Microcentrifuge Tube Rack, Micro Stand, 1.5ml 0.5ml Tubes, 8 Positions (5)

  • Mini stand for 1.5/0.5 ml microcentrifuge tubes..
  • Small, space-saving design. Size: 2 1/4" x 1 1/2" x 1 1/8" (60 mm x 35 mm x 30 mm)..
  • Made of PLA plastics. Not autoclavable. Random color..
  • 8x 11mm holes on one side for 1.5/2.0 ml microcentrifuge tubes..
  • 8x 9 mm holes on the other side for 0.5 ml PCR tubes..
Check Stock