Reviews Large Od Seamless Pipe

Brass Compression Tube Pipe Fitting Connector, Straight Coupling Adapter,1/4\ Tube OD x 1/4\ NPT Male Connector 5pcs (1/4\ OD Compression x 1/4\ NPT Male)

  • Tube OD Compression to NPT tube adapter for converting Standard National Pipe Thread (NPT) pipe to Aluminum, Plastic, and Copper straight compression thread pipe Tubing..
  • Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability.
Check Stock

Steel Straight Conversion Adapter Fittins 304 SS Pipe Fitting Tube DSJ-M,YDF-LOK,LOK, Ferrule Connector 1/8'' 1/4'' 3/8'' 1/2'',3/8'',8mm Tube

  • Stainless Steel Pipe and Fitting 304 SS Pipe Fitting Tube OD to NPT Thread.
  • Thread sizes : 01: OD 9.7MM G1/8'' 02: OD 12.7MM G1/4'' 03: OD 16MM G3/8'' 04: OD 20MM G1/2''.
Check Stock

Certified Appliance Accessories CERT77300 Universal Gas Line Connector Kit, 4 Feet, gray

  • 4ft heavy-duty stainless steel connector with 5/8” MIP (Male Iron Pipe) x 5/8” MIP on each end.
  • Two 5/8" OD (Outer Diameter) flare x 1/2" MIP tapped with 3/8" FIP (Female Iron Pipe) adapters.
  • 5/8" OD flare x 3/4" MIP tapped with 1/2" FIP adapter.
  • Supplies up to 106,000 BTU (British Thermal Unit)/hour.
  • Includes one 4-Feet heavy-duty stainless steel connector, one 5/8-Inch od flare x 1/2-Inch m.i.p. (tapped with 3/8-Inch f.i.p.) adapter.
Check Stock

JDMSPEED New 3 V-Band Flange & Clamp Kit 2 Pcs Stainless Steel Replacement For Turbo Exhaust Downpipes 2

  • ◎Small Diameter:2.25”ID (Fits over 2.25” OD Pipe).
  • ◎Large Diameter: 3”OD (Fits inside 3” ID Component).
  • ◎Metal Thickness May Vary: Approx. 1/16”.
Check Stock

1.5\ Tri Clamp Ferrules, SS304 Long Weld Clamp Ferrule for Sanitary Fittings 2PCS

  • Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Fit for all other homebrew stuff sanitary fittings..
Check Stock

Heavy-Duty Malleable Casting Iron Wall Jack for Lifting Wall Beams Decks and More with Capacity of Lifting 1,000 lbs, Red, Pack of 1

  • 1.Lifting Wall Easily – Designed to lift up walls, beams, or more into the vertical position or the desired position..
  • 2.Work Alone – Allows a single person to safely raise a fully sheathed wall by the wall jack, lifting a wall with no help.
  • NOTE: Do not stand under the wall when working.
  • For large walls, two wall jacks are recommended in use..
  • 3.Casting Iron – Made of heavy-duty and durable malleable casting iron which is weather-resistant and reusable.
  • 4.1 " OD Pipe and 2" x 4" Pole – OD 1" pipe can be used as a lever that wall will be lifted up along the 2"x 4" (actual size is 1.5" x 3.5") pole. NOTE: Please use a clear straight-grained 2" x 4" pole that is free of all knots or defects.
  • 5.Package Included - 1 pack of Wall Jack (1” pipe and 2"x4" pole are not included).
  • Backs its products with 90 days warranty.
  • Please feel free to contact us with any questions you may have..
Check Stock

flowmavin 1.5 inches Tri Clamp Tee 3 Way Sanitary Fitting Stainless Steel 304 Mirror Polished, 38mm Pipe OD.

  • Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
  • Fit for all other homebrew stuff sanitary fittings..
Check Stock

TRIL GEAR 8pcs Universal 610mm 2.5' Aluminum Turbo Intercooler Piping Kit with Elbow Hose & Bolt Clamps

  • [Replacement for]- Replacement for Universal.
  • Package Includes: 2Pcs OD:2.5" Straight Aluminum Pipes + 2Pcs OD:2.5" 45 Degree Aluminum Pipes + 2Pcs OD:2.5" 90 Degree Aluminum Pipes + 2Pcs OD:2.5" 180 Degree Aluminum U Pipes + 2Pcs Blue ID:2.5" 90 Degree Silicone Hose + 6PCS ID:2.5" Straight hose (avaiable Color:Blue Black Red) + 16Pcs 2.5" Stainless Steel T-Clamps.
  • Specifications: Thickness: 1.8mm；Material: T6061 Aluminum；Aluminum Pipe Length: 23.62" / 60cm.
  • [Function]-Transport clean, dry, sufficient and stable air to meet the needs of the engine, and avoid the abnormal wear and tear of the engine caused by impurities and large particles of dust entering the combustion chamber of the engine..
  • [Note]-Before you place your order, please check the compatibility table in the upper left corner and page description carefully to ensure that it is suitable for your car. If you have any questions, pls ask us for help..
Check Stock

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

BLACKHORSE-RACING 2.5 OD 3 ID Universal Exhaust Pipe to Component Pipe Adapter Reducer Kits Reliable Stainless Steel 2.5 Inch to 3 Inch

  • ۞Material: High quality stainless steel.
  • ۞Small Diameter: 2.5” OD (Fits inside 2 1/2” ID Component).
  • ۞Large Diameter: 3“ ID (Fits over 3” OD Pipe).
  • ۞Metal Thickness May Vary: Approx. 1/16”.
Check Stock

SYKRSS 2.0' Stainless Steel Butt Joint Exhaust Seal Band Clamp

  • Universal butt joint exhaust clamp fit for 2.0" OD pipe to 2.0" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
  • The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
  • SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

SYKRSS 2.25'Stainless Steel Butt Joint Exhaust Seal Band Clamp

  • Universal butt joint exhaust clamp fit for 2.25" OD pipe to 2.25" OD pipe, mufflers ect. quickly connect the exhaust pipe, It is removable and reusable.
  • It provides a full 360 °equal distribution of stretching forces to prevent leaks and control material distortion while complesing a seal round the joined exhaust components.
  • Full clamping area to create the best seal available without distorting pipe, muffler inlets, outlets, elbow joints, flex tubing and other system connections.
  • The butt joint exhaust clamp is made in stainless steel material, not easy to rust, corrosion resistance.
  • SYKRSS is the responsible brand, strive to offer a high-quality product and service. if you encounter any problems during the installation process, feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Rohn 25 Series 40' Basic Tower (25G)

  • INCLUDES: (1) ROHN 45AG2 STANDARD 9' 6" TOP SECTION, (5) 45G STANDARD 10' SECTION. 50' is a nominal description - actual assembled height will be less if the bottom section is partially embedded in concrete.
  • The ROHN 45G uses double bolted joints, proven to be the best method of joining tower sections for sturdiness and dependability. *See Rohn 45G Guides for Specifications and Installation Requirements*.
  • 1-1/4" OD, 14 Gauge legs 7/16" OD Solid Bracing Completely hot-dipped galvanized after fabrication. Built on a 16 3/4" equilateral triangle design.
  • Each section contains all required nuts and bolts shipped with each section. 45AG2 Features a tapered top and integrated mounting pipe. The mounting pipe is 2.38" OD / 2.07" Mounting PipeOverall length is 9'6" - see images for measurement breakdown. See description below for more information..
  • 45G Weight: 70 lbs. 45AG2 Weight: 66 lbs. *This kit is shipped via freight only, see below for more information*.
Check Stock