Reviews Large Diameter Tubing

Raindrip 314050B 1/4 in. Barbed Connector, 50-Pack, Black

  • Adds a 90-degree turn in your ¼ in. supply tubing or dripline, or use to branch ¼ in. tubing as a feeder line from a ½ in., 5/8 in., or 0.710 in. supply line.
  • Works in a variety of areas, from small to large, flat or sloped.
  • transports water to trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
  • Fits ¼ in. tubing or dripline with internal diameter of 0.170 in. or punched hole with diameter of 0.170 in..
  • Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation.
  • water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion.
  • As part of a complete drip irrigation system, the ¼ in. elbow connects ¼ in. supply tubing or dripline together, or connects ¼ in. tubing to other drip irrigation parts to transport water to the area to be irrigated.
  • Single-barbed fitting inserts into drip tubing and anchors into place.
  • Works with Raindrip products and other products with compatible connection type.
Check Stock

Raindrip 061050 5/8X500 Poly Drip Tubing 5/8

  • Use as a main supply line connected to a low-flow, drip-watering device, or punch emitters into the tubing to deliver water along the run.
  • Tubing outside diameter (OD) is 0.700 in., internal diameter (ID) is 0.600 in..
  • connects to point-of-connection device using appropriate fitting.
  • emitters and feeder lines can be punched directly into the line or attached to the end.
  • Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
  • Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content.
  • the middle layer is composed of recycled content.
  • Comes with one 500 ft. coil of 5/8 in. poly supply tubing.
  • Works with Raindrip products and other products with compatible connection type.
Check Stock

Raindrip 052050 1/2\ X500'Drip Water Hose, 1/2-Inch, Black Polyethylene, 500 ft

  • Use in a variety of ways: as a main supply line connected to a low-flow, drip-watering device.
  • as a feeder line that branches off larger tubing or pipe.
  • and with emitters punched into the tubing to deliver water along the line.
  • Tubing outside diameter (OD) is 0.620 in., internal diameter (ID) is 0.520 in..
  • connects to point-of-connection device using appropriate fitting.
  • emitters and feeder lines can be punched directly into the line or attached to the end.
  • Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
  • Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content.
  • the middle layer is composed of recycled content.
  • Comes with one 500 ft. coil of 1/2 in. poly supply tubing.
  • Works with Raindrip products and other products with compatible connection type.
Check Stock

RainDrip 052020P Drip Watering Hose , Black Polyurethane 1/2 inch x 200 Ft

  • ...that branches off larger tubing or pipe.
  • and with emitters punched into the tubing to deliver water along the line.
  • Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
  • Tubing outside diameter (OD) is 0.620 in., internal diameter (ID) is 0.520 in..
  • connects to point-of-connection device using appropriate fitting.
  • emitters and feeder lines can be punched directly into the line or attached to the end.
  • Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation.
  • water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion.
  • As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated.
  • Works with Raindrip products and other products with compatible connection type.
  • Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content.
  • the middle layer is composed of recycled content.
Check Stock

Raindrip 016005VP 1/4 in. Supply Tubing, Black Polyethylene, 50 ft.

  • Branch off the main supply line to create a feeder line that supplies water to a low-flow, drip-watering device, or use as a main line in a small drip irrigation system.
  • Works in a variety of areas, from small to large, flat or sloped.
  • transports water to trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets.
  • Tubing outside diameter (OD) is 0.250 in., internal diameter (ID) is 0.170. in..
  • connect to main supply line with ¼ in. micro fitting such as a barbed connector, connect other end directly to emitter to deliver water to plant.
  • Drip irrigation reduces water usage by up to 70% compared to conventional sprinkler irrigation.
  • water is applied precisely and at the rate the soil can accept it to prevent runoff and erosion.
  • As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated.
  • Tubing coil comes shrinkwrapped for convenience.
  • Vinyl tubing is constructed with 100% virgin content for durability.
  • Works with Raindrip products and other products with compatible connection type.
Check Stock

General Tools 129X Mini Tubing Cutter

  • The General Tools and Instruments 129X Mini Tubing Cutter, 7/8" performs where conventional tubing cutters simply cannot fit.
  • With a 1-1/2" swing radius, the Mini Cutter is ideal for limited-space applications such as refrigerator and air conditioning repair.
  • The adjustable jaws accept tubing sizes from 1/8" to 7/8 in diameter and up to 1/8" in wall thickness.
  • old Standard, tempered cutting wheels are capable of cutting through copper, aluminum, brass and thin-wall stainless steel.
  • The large adjustment knob allows for more torque and easier cutting.
Check Stock

WORKPRO 3 Pieces Tubing Cutter Set - Pipe Cutter with 1/8”-1-1/4” Cutting Capacity Mini Copper Pipe Cutter with Deburring Tool Copper Aluminum Brass and Plastic Tubing Cutter

  • Clean & Precise Cut -- WORKPRO 3PC Tubing Cutter Set is designed to make quick cuts to copper and aluminum pipes. Moreover, this pipe cutting tool can be used for repairing burrs and flying edges on the inner holes and flat outer edges of tubes..
  • Large Cutting Capacity -- The large tubing cutter can cut 1/8”-1-1/4” outer diameter and 0.13-inch thick pipe. The cutting capacity of mini tubing cutter ranges from 1/8"-3/4” pipes with a maximum thickness of 0.1-inch..
  • Ball Bearing Rollers -- Instead of adopting traditional rollers, these two tubing cutters feature ball bearing rollers, which obviously reduce friction. In addition, these bearings provide you with a cleaner cut and allow for increased cutting speed..
  • Ultra-sharp Cutting Wheel & Blade -- Equipped with a built-in ultra-sharp cutting wheel, this tubing cutter set makes every cut smoother and more efficient. Furthermore, the two blades of the deburring tool are made of wear-resistant high-speed steel..
  • Ergonomic Design -- The pipe cutting tool is characterized by a large ergonomic knob, offering users a firm grip to apply more force during the cutting process. And the solid knob improves cutting efficiency by enhancing stability..
Check Stock

Boao 20 Pack 16mm Drip Irrigation Folding Hose Connectors End Plug,1/2 Drip Tubing Figure 8 End Fitting

  • Large quantity: package includes 20 packs of hose connectors stop end cap plugs to meet your needs.
  • Good quality: they are made of sturdy tubing plastic, durable to ensure years of usage.
  • Fit size: these 16 mm barbed fittings work with half inch drip tubing, whose inside diameter is from 0.560 to 0.600.
  • Compatible with many types of tubing as well as 1/2 inch blank tubing or drip lines.
  • Quick and simple to install: these hose connectors are easy to mount without any additional tools, which is a convenient solution for both indoor and outdoor garden utilize, and provide effective, long-lasting and watertight connections for your hose system.
  • Applications: plug the end of your poly tubing or drip line with these drip irrigation end caps.
Check Stock

EZARC Pipe Cutter - Tubing Cutter Set with Mini Tube Cutter, Copper Pipe Cutter Tool 3/16\ to 2\ Outer Diameter for Cutting Aluminum PVC Thin Stainless Steel Tube

  • ✅【Large Cutting Capacity】The large tubing cutter effortlessly cuts through pipes with an outer diameter of 3/16 to 2 inches and a thickness of 1/10 inch. The mini tubing cutter is designed to cut through 1/8 to 7/8-inch pipes, with a maximum thickness of 1/10-inch. It is particularly useful in tight spaces where a full turn is not possible..
  • ✅【Exquisite Craftsmanship】This heavy-duty copper tubing cutters are made with heat-treated SKD-grade material cutting wheels and high-grade steel construction. This exquisite craftsmanship ensures they can effectively cut pipes made of aluminum, copper, PVC, as well as thin stainless steel tubes..
  • ✅【Clean & Precise Cut】EZARC professional copper pipe cutter set comes equipped with 6 individual bearings that allow for increased cutting speed. Precise rolling control ensures that each cut is smoother and more accurate, resulting in a cleaner and more precise cut during pipe cutting..
  • ✅【Various Cutting Materials】Our copper pipe cutter is versatile and can cut pipes with an outer diameter ranging from 1/8" to 2". It's perfect for cutting heavy-duty hard materials such as thin stainless steel, as well as all soft tubes like aluminum, copper, and PVC..
  • ✅【Cutting Efficiency】Our copper cutte....
Check Stock

Into the Scenery

  • Put rigid tube in fishtank and squeeze bulb to create a syphon. Place other end of tubing in bucket.
  • Siphon water changer has hand pump, starter stopper valve, long hose with filter attachment..
  • Water-transferring siphons use on medium, large, extra large gallon tanks 20 55 gal..
  • Our BPA Free kit includes a minnow net so you can move your fish for easy cleaning..
  • Total length is 8 feet. Outer diameter of hose is 3/4'' Inner diameter is 5/8'' Water flows quickly.
Check Stock

RIDGID - CC247 RIDGID 40617 Model 101 Close Quarters Tubing Cutter, 1/4-inch to 1-1/8-inch Tube Cutter Silver & 32920 Model 15 Screw Feed Tubing Cutter, 3/16-inch to 1-1/8-inch Tube Cutter

  • Product 1: Designed for use in restricted spaces on small diameter hard and soft copper, aluminum, brass and plastic tubing.
  • Product 1: Strong, lightweight slide and wheel housing and large knurled feed screw knob ensure easy control of cutting pressure for clean cuts.
  • Product 1: Rollers include grooves for close-to-flare cuts.
  • Product 1: Tubing cutter has a 1/4-inch to 1-1/8-inch (6 mm to 28 mm) cutting capacity.
  • Product 2: Easily executes clean, square cuts on copper, brass, aluminum and thin-wall steel.
  • Product 2: Large, ergonomic X-CEL knob provides a firm grip so you can cut tubing quickly and easily.
  • Product 2: Features a convenient fold-away reamer to clean and insure a better connection.
  • Product 2: Tubing cutter has a 3/16-inch to 1-1/8-inch (5 mm to 28 mm) cutting capacity.
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock

2 inch Diameter 3 1 Waterproof Heat Shrink Tubing Kit Large Marine Dual Wall Adhesive Shrinkable Wire Wrap Tube Insulation Sealing Wear-Resistant Cable Protector by YUKSY 4ft Black

  • Good Tightness - Dual Wall Adhesive Heat Shrink Tube has the advantages of good electrical insulation, good sealing and high temperature resistance.....
  • Widely Use - Our heat shrink tubing are widely used in wire connection, rust prevention and corrosion protection of solder joints, protection and....
  • Easy Use and Fast - You just use a heat gun heat it evenly until it wrap the wire or connector tightly. It is a 3:1 heat shrink ratio and will shrink....
  • Safe & ECO-Friendly - Our heat shrink tubing are UL certified, RoHS compliant, which ensures its safe and environmental protection. Protect you and....
  • Multiple Size - This is 4 feet long 2" in diameter large heat shrink tubing (Note: it is 2" in round diameter, but not 2" in width). Other sizes also....
Check Stock