Reviews Large Dia Pipe Extruder

Floor Flange Trim Plate, Steel, 3/4 In

  • Price For: Each Inside Dia.: 3/4" Max. Pressure: 150 psi Pipe Type: Pipe Nipple Pipe Size (Nominal): 1/2" Seamless/Welded: Welded Outside Dia.: 3/4" Pipe Schedule: 40 Wall Thickness: 1/16" Temp. Range: -60 Degrees to 450 Degrees F Overall Pipe Length: 4" Pipe Connection Type: Threaded on Both Ends Standards: ASTM A 312 Item: Nipple.
  • Country of Origin (subject to change): China.
Check Stock

CR-10S 3D Printers Original Replacement Parts/Accessories Full Assemble MK8 Extruder Hot End Kits with Nozzle 0.4mm /0.2mm /0.3mm /0.5mm fit for Creality 3D Printing Printer CR-10 CR-10S S4 S5

  • Creality CR10 Extruder,100% ORIGINAL CREALITY 3D PRINTING PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY.
  • MAIN MATERIAL OF CR10 EXTRUDER IS ALUMINUM ALLOTY /STANIESS STEEL/BRASS.
  • CREALITY CR10 EXTRUDER CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 CR10 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 12V 40W..
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

Creality Original 3D Printer Extruder Assembled MK8 Hot End Sprinkler Kit for Ender 3 / Ender 3 Pro with Aluminum Heating Block, 1.75mm, 0.4mm Nozzle

  • ENDER 3 EXTRUDER is 100% ORIGINAL CREALITY 3D PRINTINGE PRINTERS PARTS /ACCESSORIES AND WITH HIGH QUALITY, WE JUST CONFIRM IT WORKS WITH CREALITY ENDER 3 3D PRINTERS. OTHERS BRANDS WE DO NOT TEST IT..
  • 5 PIECES 0.4MM 3D PRINTERS NOZZLES AS GIFT..
  • ENDER 3 EXTRUDER HOT END CAN WORK WITH DIFFERENT SIZE MK8 NOZZLE: 0.2MM 0.3MM 0.4MM 0.5MM 0.6MM 0.8MM 1.0MM NOZZLE.
  • MK8 EXTRUDER HOT END KITS,WHITE WIRE WAS TEMPERATURE THERMISTOR, BLACK WIRE WAS HEATING TUBE 24V 40W.
  • TIP OF NOZZLE, ALUMINUM HEATING BLOCK, THROAT PIPE (BUILT-IN TEFLON).
Check Stock

Twotrees J-Head V6 Hot End Full Kit 1.75mm 12V RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle

  • 【1】Applicability & compatibility: compatible with all 1.75mm V6 Makerbot 3D printer.
  • NTC connector with terminal, easy to intall..
  • 【2】Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking ..
  • 【3】Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly ..
  • 【4】Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm ..
  • 【5】Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1×0.4mm ) and a v6 heating block, a 2-part Teflon tube in the nozzle neck made of stainless steel..
Check Stock

PATIKIL Thermowell Pipe Immersion Well 1/4 ID 9/32 OD 20 Stainless Steel 304 for Weldless Thermowell Brewing Thermometer 2pcs

  • Thermowell pipe is mainly used for sensor protection pipe. Temperature sensors are placed in thermowell pipes, which can be used to measure temperatures, such as water tank temperature measurement and temperature measurement during the brewing.
  • Thermowell pipe, is in size of : 6mm/0.24-inch inner dia, 7mm/0.28-inch outer dia, 500mm/20-inch length.
  • 304 stainless steel material, sturdy and durable, not easy to rust.
  • Easy to use, easy to install and operate.
  • Steps of installation: 1. Choose the right size thermowell pipe.
  • 2. Remove the thermowell pipe to be replaced.
  • Please pay attention to choose the appropriate size of thermowell pipe, especially the diameter and length of the thermowell pipe.
Check Stock

Foam Pipe Insulation,Foam tubing for 1 inch Pipe ,25mm(1") ID 35mm OD 6.5 Foot Length Black

  • APPROX. SIZE – 25mm inner dia, 35mm outer dia, 5mm wall thickness, 6.5foot total length.
  • MATERIAL –The tubing is made of Rubber material, wear resistance, anti-aging, good elasticity, strong bending,Working temperature is -40°C to 80°C(-40°F to 176°F)..
  • ADVANTAGE –High elasticity, strong tensile, easy to bend, and aging resistant,Anti-skid foam is fixed on tools or appliances and is not easy to slip..
  • MULTIPLE USAGE – Household fitness equipment anti-collision pipe, industrial machinery anti-collision pipe, household fitness equipment anti-collision pipe, handle sponge cover, protection and insulation, water pipe insulation and insulation..
  • HOW TO USE – When installing the pipe, wet the steel pipe with lubricant and water, and then install a sponge, so it is easier to install the pipe..
Check Stock

uxcell 20pcs Rubber End Caps 1/4\(6mm) ID Vinyl Round Tube Bolt Cap Cover Thread Protectors Black

  • 【Widely Application】1. All kinds of pipe ends protection: plastic pipe, metal pipe, oil pipe, water pipe, vacuum pipe.
  • 2 Thread protection: bolt, screw, nut thread protection.
  • 【Widely Application】3. For shelf, fence, rail protection.
  • 4. For furniture, chair, dining table, stool, hammock decoration protection.
  • 5.For hole cover, protect, decorate, seal (drain hole).
  • 【Size Selection】Because rubber material is soft and elastic, we recommend choosing rubber end cap that is slightly smaller than the outer diameter of the product to be protected. For example: the outer diameter of your product is 9.8mm dia, choose the rubber cover of 9.5mm!.
  • 【Rubber Material】Soft, Elastic, Accurate Size, Oil Resistance, Heat Resistance, Dust Resistance, Long Service Life.
Check Stock

Ewigkeit MK8 Hotend Ender 3 and Pro Assembled Extruder with Aluminum Heating Block 0.4mm Nozzle(24V 40W)

  • Ender 3 hot end with 100% original and high quality accessories for Creality 3D printer.
  • Ender3 pro Work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heater cartridge is 24V 40W.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
Check Stock

Piutouyar 50 Pack 12MM Two Hole Strap U Bracket 304 Stainless Steel Rigid Pipe Strap Clamp Heavy Duty Tube Strap Tension Clip (1/2 Inch)

  • 【SIZE】- Fit Pipe Diameter: 60mm/ 2.36".
  • Total Size: 107 x 18 x 60mm / 4.21" x 0.71" x 2.36" (L*W*H).
  • 【MATERIAL】- Made of 304 stainless steel, strong rust and corrosion resistant for a long time use.
  • 【USAGE】- Choose the corresponding inner height of the pipe clamp according to the OD of the pipe, determine the hole according to the hole dia and position of the pipe clamp, and lock the fastening screw. A layer of soft gasket can be placed on the inner side of the pipe clamp and the pipe fittings, the effect will be better.
  • 【APPLICATION】- Widely used in plumbing, petrochemical, power supply, and other pipeline laying, fixing all kinds of pipelines on wood, masonry, or similar surfaces.
  • 【PACKAGE CONTENT】- 5Pcs × Rigid Pipe Strap.
Check Stock

ELEGOO Neptune 3 Pro FDM 3D Printer with Auto Bed Leveling, Dual-Gear Direct Extruder, Dual Lead Screw Drive, Removable Capacitive Screen, 225 x 225 x 280 mm³ Large Printing Size

  • ...en by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation..
  • 【Dual-Gear Direct Extruder】The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS..
  • 【Nozzle Kit for Better Printing Effect】The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle.The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging..
  • 【Smarter Printing Experience】Auto mesh bed leveling adopts a non-....
Check Stock

MECCANIXITY PVC Petrol Fuel Line Hose 3/16 x 5/16 16ft Pink for Chainsaws Lawn Mower String Trimmer Blowers Small Engines

  • Petrol fuel line hose is a very common and useful accessory used in various engines at home and in the garden. Fuel line is used for small engines for....
  • Fuel line hose, is in size of : 5mm/0.2-inch inner dia, 8mm/0.31-inch outer dia, 1.5mm/0.06-inch wall thickness, 5m/16ft total length.
  • The fuel pipe has strong oil resistance and wear resistance, smooth surface, easy installation, and can work normally in low temperature environment.....
  • Steps of installation: 1.Prepare a fuel line hose.
  • Please select the fuel pipe of appropriate size, especially the inner diameter and outer diameter of the pipe.
Check Stock

Weiler 44154 2-1/2\ Double Spiral Flue Brush.012 Steel Fill, Made in The USA

  • Designed and engineered from black oil-tempered wire.
  • Ideal for pipe cleaning, flue cleaning, boiler tube cleaning.
  • Industrial grade performance line, fitted with 1/4 x 2 in NPT pipe nipple.
  • Brush dia 2-1/2 in, filament dia .012 in, brush length 4-1/2 in, overall length 7-1/2 in.
Check Stock

The Right to Bear 3D Printers

  • 【QIDI Third Generation Extruder Assembly】The two newly upgraded extruders of X-PLUSⅡ are dual-gear extruders with more accurate printing, better heat dissipation, and less clogging.The ordinary extruder has already been installed on the printer, and its max printing temperature is 250 ℃. It can work well with PLA, ABS, and TPU. The high-temperature extruder has a 300 ℃ maximum printing temperature, which can print Nylon, PA12-CF, and PC..
  • 【Double Z-axis driver】 Ensures more stable and more precise printing quality when you print large model size. Higher configuration 3D printer.Large print size is 10.6x7.9x7.9 Inch..
  • 【Filament detection function& Resume Printing】X-PLUSⅡis equipped with a filament runout sensor. When printing a large model, there is no need to worry about the filament depletion. It will ring to remind users.If a power outage occurs during the printing process, the printer will automatically save the breakpoint..
  • 【Latest slicer software version 6.5.1】: Redesigned UI interface of QIDI software is smarter and more convenient to operate. It has changed the software's slicing algo....
Check Stock