Reviews Lap joint Flange

EVIL ENERGY 3 Lap Joint Exhaust Band Clamp Preformed 304 Stainless Steel

  • Joins 3.0 inch OD Pipe to 3.0 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as....
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the....
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and....
Check Stock

EVIL ENERGY 2.25' 2 1/4 Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel 2pcs

  • Joins 2.25 inch OD Pipe to 2.25 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, muffler and catalytic converters. Width of strap: 2.94inch (74.8mm). Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the sections being clamped have sufficient lengths of straight pipe leading into it. It is removable and reusable, easy to install without welding..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Barrier Bond Brushable Seam Sealer - Quart Can with 30.4 Fluid Ounces - Automotive Brush on Body Seams Joints Floors Trunks - Autobody Repair Fast-Drying Paintable

  • Brushable Seam Sealer is fast drying and designed exclusively for automotive uses..
  • This product remains flexible and will not crack, harden, sink or sag..
  • Brushable Seam Sealer is easily applied with a brush and holds a perfect brush mark to match that O.E.M. seam..
  • It provides excellent adhesion, seals cracks, crevices, body seams and is ideal for use on all lap and flange seams and joints..
  • Brushable Seam Sealer is paintable in 30 to 60 minutes and comes in a light gray color..
Check Stock

ESPEEDER 3.0 Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • Universal fitment, Joins 3.0" OD Pipe to 3.0" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs.....
  • The lap joint clamps 3.0" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat....
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without....
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one....
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 3.0" lap joint band clamp, you can feel free to contact us via....
Check Stock

2.5" Lap Joint Band Clamp Exhaust Clamps Pipe Repair Parts Stainless Steel

  • Universal fitment, Joins 2.5" OD Pipe to 2.5" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. reducing costs and time Significantly..
  • The lap joint clamps 2.5" are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.5" lap joint band clamp, you can feel free to conta....
Check Stock

ESPEEDER 2.0" Lap Joint Band Clamp Exhaust Clamps Pipe Parts Stainless Steel 2Pcs

  • Universal fitment, Joins 2.0" OD Pipe to 2.0" ID Pipe, made of 304 stainless steel. There are 5 sizes for choose, it can meet your various needs. Come with 2Pcs/Package. reducing costs and time Significantly..
  • The lap joint clamps 2.0 are best when cosmetic appearance is important, and have a wide range used. This would include exhaust tips, mufflers, cat back systems, racing exhaust, and show cars..
  • Conforms to pipe and flex tubing, exhaust pipe connector come with an "I" block provides a full 360 °equal distribution of stretching forces, without distorting the pipe, to create the best seal available without distorting pipe, This exhaust band clamp is specifically designed for exhaust pipes connection..
  • No welding design makes lap joint clamp fast, easy and accurate installation. It is removable and reusable. just need to put one of the nut bar on one side and insert the bolts, put another nut bar on, then screw the nuts, works done..
  • SYKRSS value your shopping experience, If you encounter any problems in installing the 2.0" lap joint band clamp, you can ....
Check Stock

Floshine 2.5 in Lap Joint Band Clamps,Exhaust Muffler Clamp 4 PCS，2.5 Exhaust Pipe Clamps preformed Stainless Steel

  • Application--2.5" Exhaust clamps are a simple and quick tool for connecting exhaust system components, such as exhaust pipes, mufflers and catalytic Flexible disassembly and assembly methods allow maintenance while protecting the exhaust pipe from being twisted.
  • No welding design--This 2.5 exhaust clamp is tightly fitted 360° to evenly withstand tensile forces and prevent deformation and leakage of the exhaust pipe.No welding design of Lap joint exhaust sleeve clamp makes installation and removal easier and faster.
  • Component parts--304 stainless steel band,steel gasket,aluminum alloy I-block and zinc-plated flange bolt and nut.Make sure that the stainless steel surface is tight against the exhaust pipe and the nut is tightened when installing.
  • Non-rusting and corrosion resistant--Floshine Exhaust clamp is used for 2.5" OD to 2.5" OD exhaust pipe,mffler,catalytic converters connection.Stainless steel material has good corrosion resistance and is not easy to rust, providing a longer service life..
  • WARRANTY--Floshine offers a 5-month warranty and we are committed to enhancing the user experience.Please feel free to contact us with any questions about the product.
Check Stock

Micro Trader 2pcs Toilet Top Cover Lid Seat Fixings WC Blind Hole Fitting Black Screws Nut

  • Use as a replacement flange for broken toilet flanges.
  • Compression joint provides up to 3 in. of adjustment to the riser.
  • Slides inside 4 in. cast iron or PVC Sch. 40 DWV pipe.
  • Rubber compression gasket enables the toilet flange to be used on many types of cast iron piping.
  • 3 stainless steel bolts tighten to compress the rubber gasket, securing the flange to the existing piping.
Check Stock

Mevotech TTX Suspension Ball Joint

  • MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings..
  • EASIER INSTALLATION: Quickly install the ball joint with the custom-designed adapter ring..
  • SUPERIOR SEAL: Lock out moisture and contaminants with Integri-Boot design built into the ball joint assembly..
  • SIMPLE TO SERVICE: Make servicing a snap with the 180 Degree & 90 Degree SAE grease fitting included..
  • ACCURATE FIT: Easily and accurately press fit the ball joint into the larger flange diameter..
Check Stock

Mevotech TTX Suspension Ball Joint

  • MAXIMUM TOUGHNESS: Get longer-lasting performance from patented sintered bearings..
  • QUICK AND EASY INSTALLATION: Simply secure ball joint to the vehicle with part specific Slotted Castle Nut & Easy Snap Cotter Pin provided..
  • SUPERIOR SEAL: Lock out moisture and contaminants with Integri-Boot design built into the ball joint assembly..
  • SIMPLE TO SERVICE: Make servicing a snap with the 90 Degree SAE grease fitting included..
  • ACCURATE FIT: Easily and accurately press fit the ball joint into the larger flange diameter..
Check Stock

Oatey 43538 4-inch Black ABS Cast Iron Closet Flange Replacement

  • Replaces broken cast iron closet flanges.
  • Rubber compression gasket enables flange to be used on many types of cast-iron piping.
  • 3 stainless-steel bolts compress the rubber gasket to secure the flange to the existing piping.
  • Compression joint provides up to 3 in. of adjustment to the riser.
  • Durable plastic construction for long-lasting use.
Check Stock

Wiha 30933 8.0 Inches Ergo Soft Grip Industrial High Leverage Diagonal Cutters

  • Industrial SoftGrip High Leverage Diagonal Cutters. 8.0"/200mm OAL. AWG #4. Dynamic Joint provides 40% easier cuts and significantly longer tool life. Semi-circular. Low wear lap joint, riveted and able to withstand high levels of load. Low force action,.
Check Stock

DONLAB REA-0073 2000ml/2L,24/40 Cylindrical Round Bottom Reaction Kettle Flask, Three-Neck Ground Glass Joints

  • Both the reaction lid and the lidless reaction kettle are 15 cm flat flange outer diameter.
  • The outer edge of the flange of the lid and the reaction kettle is about 9mm thick.
  • Borosilicate 3.3 glass ,it's heavy wall design.
Check Stock