Reviews Landscaping Nozzle

Furnrubden Patio Misting System, Mist Cooling System, Outdoor Misting Nozzle Fan System Line, Misters Cooling Kit for Patio, Irrigation, Garden, Home, Lawn, Greenhouse, Trampoline (60Ft Mist Sytem)

  • 18M(60Ft) Misting Cooling System Incluiding: 10FT (3m) Misting Tube Supply+ 15M mist system line with 26 Brass Misting nozzles.
  • 60 Saddle clamps +1pc Faucet connector +1pc PTFE TAPE+ Instruction.
  • Energy saving: large joint can be directly connected to the faucet, which can be used for cooling, irrigation, spray, no electricity consumption, environmental protection and energy saving. It is an essential product in summer..
  • Working Pressure: The misting system can work under normal pressure (2-3kg).
  • and the maximum working pressure is up to 30 bar (450 pounds / square inch).
  • Brass nozzle has nice corrosion resistance, and long nozzle life..
  • Misitng System Size： The spray system can be customized and easy to install. It can be installed in 5 minutes. The size of the water pipe is 1/4 inch, the nozzle thread size is UNC10-24, We also increased the raw material belt which can stabilize the joint..
  • Application: Cooling, irrigation, swimming pool fog cooling Garden, greenhouse, landscaping, trampoline water park, sunshade sail, outdoor cooling system, umbrella, garden, landscaping, fog mosquito system humidification greenhouse, deodorant air purification and so on.
Check Stock

Orbit 10106H Misting Nozzle

  • * Material: A Filter on your mist system, features a sturdy brass body with stainless steel orifice, not rust, durable. Minimal water use of 1/2 gallon of water per hour per nozzle..
  • * Thread size: 4mm(diameter)*5mm(length) , Total length 24.8mm. Note : this is a high Pressure mist nozzle, the Operation Pressure is 20-80kg/cm, Flow Rate 80-145ml/min..
  • * Wide Appliacations: It can be usually used for a wide range of occasions such as garden, balcony, villa garden sprinkler irrigation.
  • Perfect for landscaping, cooling, air humidification, spray disinfection, epidemic prevention, deodorizing air purification..
  • * There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be There is a stainless steel mesh in the nozzle with good filter efficiency, the water will be sprayed in network, good for filtering systems ..
  • * Item contains 10 pcs Brass Misting Nozzles, Soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage..
Check Stock

50PCS Brass Misting Nozzles for Outdoor Cooling System 0.012' Orifice (0.3 mm) 10/24 UNC

  • Operation Pressure:4-70kg/cm (60-995 psi) flow rate:80-145l/min (21-38gpm)..
  • Save Water: Minimal water use of 1/2 gallon of water per hour per nozzle, which fits for low pressure mister system..
  • Package Quantity: 50Pack. The orifice of these mister nozzles is 0.012 inch/0.3 mm. Screw into any 10/24-threaded mist nozzle opening..
  • High Quality & Leak Proof: These misting nozzles made of brass, never rust. Best choice for outdoor use with cold water. Each nozzle is equipped with a leak proof O-ring, so no tape or sealant is required..
  • Wide Application: The brass misting nozzle is widely applied to outdoor cooling system, agriculture irrigation system, green house, landscaping, small fountain, etc..
Check Stock

RuoFeng Mister Nozzles Brass For Outdoor Cooling System Low-Pressure Atomizer 22 pcs Orifice 0.008\ (0.2 mm) 10-24 UNC

  • 22 Pcs Brass Misting Nozzles For Outdoor Cooling System, Greenhouse, Landscaping and Dust Control.This type of nozzle is applied in the low pressure.
  • This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage.
  • It is used a sturdy brass body with stainless steel orifice,Use of precision nozzle keypunch, sophisticated production,strong durability.
  • Operation Pressure:20-70kg/Cm .Flow Rate:80-145l/Min (21-38GPM).Minimal Water Use Of 1/2 GPH Per Nozzle.
  • Thread size:10-24 UNC，Orifice：0.008" (0.2 mm).
Check Stock

Aootech 32 Pack Brass Misting Nozzles for Outdoor Cooling System, 0.012” Orifice (0.3 mm) 10/24 UNC

  • 32PCS Brass Misting Nozzles For Outdoor Cooling System, Greenhouse, Landscaping and Dust Control..
  • High Quality: Made of Brass,Never Rust. Best Choice For Outdoor Use With Cold Water..
  • Screw Into Any 10/24-Threaded Mist Nozzle Opening..
  • Operation Pressure:4-70kg/Cm (60-995 psi) Flow Rate:80-145l/Min (21-38GPM)..
  • Minimal Water Use Of 1/2 GPH Per Nozzle..
Check Stock

Furnrubden Misting Cooling System,Patio Outdoor Fan Mist Syste

  • Misitng Nozzle System Including - (18.5M) 60.7FT : Including : 11.5Ft (3.5M) Misting Hose Supply +(15M) 49.2Ft misting system Line with 26 Misting nozzle seats.
  • +1pc Faucet connector +1pc PTFE TAPE+ Instruction.
  • Usage: Perfect for Greenhouse, landscaping.
  • humidified courtyard, lawn garden landscape, swimming pool cooling trampoline water park, very suitable for agricultural plants, bonsai and potted fruits or flowers irrigation.
  • Perfect Product: Enjoy a very good cooling and humid effect and environment, installed in the courtyard, can effectively cool the surrounding temperature, spray a layer of mist, keep people cool. At the same time, it is also the necessary equipment for tourism.
  • Installation :The system can be DIY, Easy installation, 1/4'' Mist Hose.
  • maximum working pressure: 30 bar (450 psi).
  • no power consumption, less water than traditional watering；.
Check Stock

AmMist Mister Nozzle Stainless Steel Fog Nozzles Muti-Pack 0.30mm (0.012inch) Orifice 10/24 UNC Thread for Garden, Humidification, Outdoor Cooling, Dust Control, Landscaping (Multi-Pack) (23/Packs)

  • ★【 MULTI-USAGE 】: humidification outdoor cooling, landscaping, greenhouse, etc..
  • ★【 DURABILITY 】: Complete 303 Stainless Steel Nozzle / Raw materials are purchased from Japan with high purity..
  • ★【 STABLE QUALITY 】: Taking a 100% inspection of all the nozzles before shipment.
  • ★【 RELIABILITY 】: The factory focuses in nozzle engineering and manufacturing for more than 30 years..
  • ★【 PERFORMANCE 】: Operation Pressure: 100~1,500psi (6.9bar~100bar) / Flow Rate: 1/2 gallon per hour at 6 bar per nozzle.
Check Stock

1\ DN25 Brass Adjustable Water Fountain Nozzle Spray Pond Sprinkler Head for Garden Pond, Amusement Park, Museum, Library

  • The upper end of the cedar nozzle is sh with the water surface, and the water can be taken out of the pool when spraying water, forming a large and spectacular water column, which is strong against wind..
  • Made of high quality copper material, corrosion resistant and durable..
  • The sprinkler head is widely used in fountains in public squares and public places..
  • Stable characteristics and high reliability, a direct replacement for the broken one..
  • This fountain nozzle can be used to achieve wonderful landscaping effect..
Check Stock

Sunmns 20 Pack Brass Misting Nozzles for Outdoor Cooling System and Greenhouse Landscaping Dust Control, 0.012 Inch Orifice (0.3 mm) 10/24 UNC

  • Package includes 20 pieces brass misting nozzles.
  • Made of brass,never rust. Best choice for outdoor use with cold water.
  • Screw into any 10/24-threaded mist nozzle opening.
  • The orifice of this misting nozzle is 0.012 inch/ 0.3 mm in diameter, which fits for high pressure spray system.
  • Widely apply for landscaping, outdoor cooling system, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, etc..
Check Stock

SEWER JETTER - 50 FT DRAIN CLEANER for Your GAS Pressure Washer by SewerFlex

  • 50 FT sewer jetter PULLS ITSELF deep into slow running drains, BREAKS APART stubborn clogs, SCRUBS AWAY greasy build-up off the sides of pipes, and....
  • Helps you unclog 3" to 4" ID MAIN DRAINS, LANDSCAPING DRAINS and SEPTIC LINES that have long-sweep drain elbows and fittings..
  • Powerful NOZZLE has THREE BACK JETS to power the sewer jetter through drains, and ONE FORWARD JET to help break up dense clogs. IDEAL for cleaning and....
  • Assembled COMPLETE and READY TO USE - includes 50 foot drain cleaning POLY HOSE, stainless steel NOZZLE, standard M22 male ADAPTER for most gas....
  • BEFORE ORDERING read and follow all IMPORTANT INFORMATION in the Description section. NOT COMPATIBLE with electric pressure washers..
Check Stock

Orbit PVC 30 in. Flexible Misting Stand 1 pk

  • Adapt to Water Temperature: 5-40℃/41°F -104°F..
  • Easy Assembly: No special tool is required, the patio misting kit can be assembled easily. It will be connected to any standard outdoor threaded faucet..
  • Provide a 32.8ft water mist cooling supply tubing and cool the ambient air temperature up to 20 ℃/68°F, you can use this spray system in front of your home to resist the hot summer..
  • Application: Widely used in lawn, garden, patio, greenhouse, swimming pool, Vegetable fields, landscaping, plant watering, farms, etc..
Check Stock

Bluecell 8pcs High Pressure Brass Misting Nozzles Fogging Spray Head for Outdoor Cooling System, 0.016\ Orifice (0.4mm) 10/24 UNC Thread

  • Package including 8pcs High Pressure Atomizing Sprayer.
  • !!!NOTE: Operation Pressure: 30-80kg/cm2 (430-1140 PSI), optimal operating pressure, please ensure that these Fogging Spray Heads is suitable for your misting system before purchase..
  • Nozzle: 0.016 inches (0.4 mm) orifice, screw into any 10/24-threaded mist nozzle opening.
  • Made of Brass, never Rust, best choice for outdoor use with cold water. Suitable for high-pressure spray system..
  • Perfect for garden watering, greenhouse nursery, Landscaping, spray disinfection and Outdoor Cooling Mister System, etc..
Check Stock

H&G lifestyles 1/2 Inch PVC Coupling with Brass Nozzle Mister Nozzle PVC （10 pcs. Couplings

  • 【Upgrade High Quality】 Use of precision brass misting nozzle keypunch, sophisticated production.
  • 【 Bear Pressure】20-70kg/Cm. Flow Rate:80-145ml/Min, Water Use Of 1/5 Gallon Of Water Per Hour Per Nozzle..
  • 【Easy to install】Use with Standard Schedule 1/2 In. PVC pipe.
  • 【Energy conservation 】: Great for directly use tap water extend the cooling area of the Basic Outdoor Misting Cooling System ,Or replacement for Orbits PVC Mister.
  • 【Wide Application】: Combine with other PVC fittings to custom design your own misting system. also can DIY a Seas Waterpark Play Table in the garden for your child , apply for garden, landscaping, greenhouse, humidification, swimming pool misting fog cooling, cooling for all birds and animals. and so on.
Check Stock