Reviews Laminate Veneer

DCT Heavy-Duty High-Pressure Rubber J-Roller – Curved Handle and Solid Hard Roller Tool for Floor Laminate & Veneer Glue

  • INSTALL LAMINATE AND VENEER: Use the DCT Heavy-Duty High-Pressure Rubber J-Roller – Curved Handle and Solid Hard Roller Tool for Floor Laminate & Veneer Glue to apply pressure to laminates and veneers for optimal glue adhesion.
  • Efficiently install plastic laminate and wood veneers laminates.
  • GRIP COMFORTABLY: 12.5-inch long (31.8cm) oversized handle with 4.5-inch (11.4cm) end and 3.5-inch (8.9cm) center comfortable non-slip mixed hard plastic and rubber grips for easy hold with either 1 or 2 hands.
  • EVEN PRESSURE: 14-inch long (35.6cm) curved steel with plastic-coated rubber handle for optimal leverage.
  • High-pressure curved J-style handle allows for even pressure distribution so you can press down without bending the bar and allows you to gain mechanical advantage with enhanced control.
  • USE ON YOUR FLOORING: Installing laminate requires a roller that can distribute even pressure on the contact cement while removing the air bubbles.
  • Great for applying flashing on wood and rolling seams on adhesive vinyl tile in close quarters areas such as a bathroom.
  • BUILT TO LAST: Solid hard rubber roller is 3 inches long and 1.5 inches in diameter (7.6cm x 3.8cm).
  • Roller has plastic friction bearing with snap rings on each end for maximum strength and longevity.
Check Stock

FRITHJILL Wooden Nightstand with Charging Station, End Table with USB Ports & Power Outlet, Versatile Storage Cabinet

  • Expertly made with engineered wood (MDF/particleboard/plywood) for the right balance of affordability and durability.
  • Decorative laminate veneer replicates natural or man-made material surfaces with consistent color, pattern and texture.
  • Light brown finish over replicated oak grain with authentic touch.
  • 2 smooth-gliding drawers with fully finished interior, dovetail construction and ball-bearing side glides.
  • Drawer interiors are lined with a faux linen laminate for a clean, finished look.
Check Stock

LWBTOSEE Clear Disposable Face Shield, for Shower Haircut Hairspray and Eyelash Extensions Eyebrow Eye Eyelid Surgery Aftercare (50 PCS)

  • Applying veneer, laminate or even wall coverings usually requires some tools that you may not find in your neighborhood big box store or even at a local mom and pop hardware store. The Fulton J-Roller is one of those items and is the ideal tool for applying pressure to your sheet or paper goods to ensure proper adhesion to your work surface..
  • When applying veneer on wood for example, you generally need to exert a good amount of even downward pressure on the veneer sheet or roll. To do this, we could use a flat bar of some sort, but that generally won’t be even enough and can’t get into the slight undulations of the wood surface. The Fulton J-Roller is the perfect width to properly work the veneer for proper adhesion..
  • A full 12” long, the J-Roller is the perfect length to handle most any project where you need to apply sheet goods to another surface. The roller is made from a firm, non-marring, textured rubber material that helps you apply pressure where it is needed. The roller wall is about 3/8” thick so it will stand up to the rigorous chore of applying pressure to your sheet goods..
  • The heavy duty steel handle is designed to help you exert as much pressure as possible to the work surface. The handle is wrapped with two separate sec....
Check Stock

The Ultimate Bar Book: The Comprehensive Guide to Over 1,000 Cocktails (Cocktail Book, Bartender Book, Mixology Book, Mixed Drinks Recipe Book)

  • Applying veneer, laminate or even wall coverings usually requires some tools that you may not find in your neighborhood big box store or even at a local mom and pop hardware store. The Fulton J-Roller is one of those items and is the ideal tool for applying pressure to your sheet or paper goods to ensure proper adhesion to your work surface..
  • When applying veneer on wood for example, you generally need to exert a good amount of even downward pressure on the veneer sheet or roll. To do this, we could use a flat bar of some sort, but that generally won’t be even enough and can’t get into the slight undulations of the wood surface. The Fulton J-Roller is the perfect width to properly work the veneer for proper adhesion..
  • A full 12” long, the J-Roller is the perfect length to handle most any project where you need to apply sheet goods to another surface. The roller is made from a firm, non-marring, textured rubber material that helps you apply pressure where it is needed. The roller wall is about 3/8” thick so it will stand up to the rigorous chore of applying pressure to your sheet goods..
  • The heavy duty steel handle is designed to help you exert as much pressure as possible to the work surface. The handle is wrapped with two separate sec....
Check Stock

Fulton Long Handle J Roller with Thick Rubber Roller 1-1/2” in Diameter by 2-7/8” Wide For Veneers Laminate Wall Coverings and Edge Banding for Maximum Pressure Adhesion

  • Applying veneer, laminate or even wall coverings usually requires some tools that you may not find in your neighborhood big box store or even at a local mom and pop hardware store. The Fulton J-Roller is one of those items and is the ideal tool for applying pressure to your sheet or paper goods to ensure proper adhesion to your work surface..
  • When applying veneer on wood for example, you generally need to exert a good amount of even downward pressure on the veneer sheet or roll. To do this, we could use a flat bar of some sort, but that generally won’t be even enough and can’t get into the slight undulations of the wood surface. The Fulton J-Roller is the perfect width to properly work the veneer for proper adhesion..
  • A full 12” long, the J-Roller is the perfect length to handle most any project where you need to apply sheet goods to another surface. The roller is made from a firm, non-marring, textured rubber material that helps you apply pressure where it is needed. The roller wall is about 3/8” thick so it will stand up to the rigorous chore of applying pressure to your sheet goods..
  • The heavy duty steel handle is designed to help you exert as much pressure as possible to the work surface. The handle is wrapped with two separate sec....
Check Stock

Slatwall AcrylicTray, 16\W x 8\D x 2\H

  • SC-SW1023M Material :Wood veneer melamine laminate finish. Maple Color..
Check Stock

Home Invasion: The Survivalist Series, Book 8

  • Heavy-duty MDF wood panels with a moisture resistant PVC laminate veneer in Black Finish.
  • Tilt and adjustable table panel Featuring a safety edge-stopper and adjustable table height between 30. 75 and 45. 5 inches With dual knobs.
  • Open storage compartment and a closed storage compartment with bottom hinges, 2 of 4 caster with locking mechanism.
Check Stock

Techni Mobili Rolling Adjustable Laptop Cart, Graphite

  • Two safety edge-stopper to prevent objects from sliding off when the panel is tilted.
  • Scratch resistant powder-coated steel frame and double-wheel Non-Marking casters with locking mechanisms.
  • Heavy-duty MDF wood panels with a moisture resistant PVC laminate veneer in Graphite Finish.
Check Stock

HTVRONT Yellow Permanent Vinyl, 12 Pack Yellow Vinyl for Cricut - 10 Yellow Vinyl Sheets 12" x 12" & 2 Transfer Tape Sheets for Party Decoration, Sticker, Craft Cutter, Car Decal (Glossy)

  • Applying veneer, laminate or even wall coverings usually requires some tools that you may not find in your neighborhood big box store or even at a local mom and pop hardware store. The Fulton J-Roller is one of those items and is the ideal tool for applying pressure to your sheet or paper goods to ensure proper adhesion to your work surface..
  • When applying veneer on wood for example, you generally need to exert a good amount of even downward pressure on the veneer sheet or roll. To do this, we could use a flat bar of some sort, but that generally won’t be even enough and can’t get into the slight undulations of the wood surface. The Fulton J-Roller is the perfect width to properly work the veneer for proper adhesion..
  • A full 12” long, the J-Roller is the perfect length to handle most any project where you need to apply sheet goods to another surface. The roller is made from a firm, non-marring, textured rubber material that helps you apply pressure where it is needed. The roller wall is about 3/8” thick so it will stand up to the rigorous chore of applying pressure to your sheet goods..
  • The heavy duty steel handle is designed to help you exert as much pressure as possible to the work surface. The handle is wrapped with two separate sec....
Check Stock

Techni Mobili RTA-2018-ES18 Compact Computer Cart with Storage, Espresso

  • Heavy-duty Particle board panels with a moisture resistant PVC laminate veneer.
  • Adjustable shelf that can be mounted center, right or left of the desktop.
  • Keyboard shelf, side media rack, and locking caster.
Check Stock

Techni Mobili Contempo Glass Top Computer Desk with Pull Out Keyboard Panel, Clear

  • Heavy-Duty 8mm Tempered Safety Clear Glass Desktop.
  • Curved Scratch Resistant Powder-Coated Steel Frame.
  • Pull-out Keyboard Tray with Moisture Resistant PVC Laminate Veneer in Mahogany Finish.
Check Stock

Techni Mobili Modern Multi Computer Desk with Storage, 30\ x 21.7\ x 45.3\

  • Heavy-duty Particle board panels with a moisture resistant PVC laminate veneer in Pine Finish.
  • Powder-coated Steel legs painted in white.
  • Full width Multi-Compartment storage drawer for accessories.
  • Back storage compartment opens up for accessible cord management.
Check Stock

Baxton Studio Prescott 5-Piece Modern Table and Stool Set with Hidden Storage

  • Contemporary table and nesting stools set.
  • Each stool features a removable brown faux leather lid, storage compartment, and plastic caster wheels for easy mobility.
  • Table features a center storage space/shelf.
  • Ships in several boxes, may ship separately.
Check Stock