Reviews Lab Oscilloscopes

Proster 100 MHz Oscilloscope Clip Probes with BNC to Mini Grabber Test Lead Kit BNC to Mini-Grabber Clips Oscilloscope Probe

  • Universal Oscilloscope Probe: 10:1 and 1:1 switchable bandwidth 100MHz, suitable for oscilloscopes from all manufacturers , equipped with the standard BNC connector.
  • Test lead of a BNC connector to 2 mini-grabber clips: 48 inch mini-grabber clips coded in black and red, keep this handy lead on hand for your next electronics project.
  • High Sensitivity: Fully shielded welding BNC connector, less signal interference.
  • pure copper plated gold pin, less contact resistance and good contact performance.
  • Interchangeable Probe Tip. High Input Impedance (X10 Range). Low power consumption and energy-saving.
  • Suitable for all digital oscilloscopes and analog oscilloscopes voltage detectors to test circuit.
Check Stock

Goupchn Universal P6100 Oscilloscope Clip Probes 100MHz with Accessories Kit 1X 10X 2 Pack

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 2 x probes, 8 x marker rings, 2 x ground wires, 2 x ic test protection caps, 1 x adjustment tool, 1 x user manual..
Check Stock

Goupchn Oscilloscope Clip Probes 200MHz Fully Insulated BNC End Probe with Accessories Kit 1X 10X

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 2 x probes, 16 x marker rings, 2 x ground wires, 4 x locating sleeves, 1 x adjustment tools, 1 x ground springs, 1 x user manuals, 1 x oscilloscope link adapters..
Check Stock

Goupchn Oscilloscope Probes Kit with Accessories 200Mhz Test Leads Set BNC to Mini Grabber Cable 4mm Banana Plug to Test Hook Clip Leads

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • Oscilloscope probe attenuation can be adjusted with a 1X or 10X sliding switch. The grounding crocodile clip reliably grounds the probe stage for safe operation and correct signal reading..
  • The tip of the removable hook is protected by a plastic case. The positioning sleeve ensures the stability and reliability of the tip exposed at the test point. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Adjustable oscilloscope probe is compatible with the BNC interface, digital oscilloscopes, virtual oscilloscopes, handheld oscilloscopes and more..
  • Package includes: 2 x 200mhz oscilloscope probes with with Accessories kit, 1 x bnc to minigrabber test lead, 2 x 4mm banana plug to test hook leads, 1 x white transparent storage box..
Check Stock

Micsig Oscilloscope Probe CP2100A AC/DC Current Probe 800KHz 10A/100A with Standard BNC Interface

  • The CP2100A Oscilloscope Probe has automatic and manual zero adjustment modes, it can also perform zeroing and demagnetization automatically or manually. Bandwidths up to 800KHz..
  • The split design makes the probe small and exquisite , easy to carry and use..
  • This CP2100A Current Probe can be powered by Oscilloscopes USB port and doesn't require any extra power supply..
  • It comes with a standard BNC interface, applicable to all BNC interface oscilloscopes. It also can be used with a multimeter after adding the suitable adapter..
  • Satisfaction Guarantee: We offer a 1-year manufacturer’s warranty and lifetime customer support for this product..
Check Stock

SKYXIU Digital Tablet Oscilloscope,with 2 Channel Handheld Multifunction Oscilloscope,100Mhz Bandwidth,1GSa/s Sampling Rate 7\ TFT LCD Touch Screen(1013D Plus)

  • ...module,can tolerate a continuous voltage of up to 400V.Built-in 6000mAh high-performance lithium battery,can be used continuously for 4 hours after fully charged.(Note：Before use,please read the manual attached to the product. If you have any questions,you can contact us.).
  • 【MULTIFUNCTION OSCILLOSCOPE】This lab oscilloscopes with powerful waveform picture manager supports thumbnail browsing,viewing,detailed viewing,page turning,deletion and waveform zoom in,zoom out,move,etc.Equipped with a USB interface,it can be connected to a computer to share screenshots with the computer, which is convenient for secondary analysis..
  • 【MEASUREMENT RANGE】This tablet oscilloscope has High measurement voltage range,1X can measure 0 ~ 40 V,10X can measure 0 ~ 400Vm,100X can measure 0 ~ 4000V.Up to 12 parameters measurement：VPP，VP,Vmax,Vmin,Vavg,Vrms,Frequent,Duty,Duty-Time,Time-,Period..
Check Stock

Goupchn 500Mhz Oscilloscope Clip Probe 10x P6500B High Precision with Adjust Tool Accessory Kit

  • Oscilloscope Probes are electrical component which connect the circuit under test and oscilloscope input. Superior materials and advanced technology enhance the feeling and the structure. The smooth surface is easy to use..
  • P6500B probe is a 500MHz oscilloscope probe with a switch for 10x attenuation. It is a good oscilloscope accessory and suitable for BNC interface oscilloscopes..
  • Probe can be used in professional test equipment. It has a 1.3m cable with standard BNC end. It has stable performance and provides several accessories. Adjustment tool can adjust compensation capacitance to match oscilloscopes. 4 colors identification rings compatible with most oscilloscope probe sizes for easy channel differentiation..
  • Package include: 1 x probe, 8 x marker rings, 1 x ground wire, 1 x retractable hook tip, 1 x adjustment tool, 1 x ground spring, 1 x BNC adapter..
  • Warranty: Hope you can be satisfied with our oscilloscope probes. We provide guarantee of a 30-day replacement or refund for any problem and 1 year warranty. If you have any question, feel free to contact us..
Check Stock

Passive Attenuator, 1.053M Input Res HT201 Converter Passive Attenuator 20:1 Passive Oscilloscope Signal Attenuator for Inductive Signal Primary Ignition, Automotive Diagnostics Use

  • 20:1 OSCILLOSCOPE PASSIVE ATTENUATOR: Can be used with most oscilloscopes to measure injector and primary ignition waveforms. Note that this attenuator should not be used for any high pressure measurements other than injectors and primary igniters.
  • PASSIVE 20:1 ATTENUATOR: If input 20V signal, it can output 1V signal. Since the signal is attenuated, using this project, the oscilloscope can measure voltages above its range (±20V).
  • MEASUREMENT RANGE: Due to signal attenuation, using this item, the HT201 attenuator can measure voltages above its range (±20V).
  • PRODUCT FEATURES: It provides enhanced input overload protection when used in oscilloscopes to measure inductive signals, such as nozzles and primary ignition. Do not use it for secondary ignition tests.
  • AFTER SALES & SERVICE: If for some reason you are not satisfied with your purchase, damaged, damaged in shipping or even changed your mind. Please feel free to contact us, we will be happy to answer your questions.
Check Stock

SIGLENT SPL2016 16-channel Logic Analyzer Probe for SIGLENT SDS2000X

  • Logic Probe for SDS2000 series , 16-channel, 500MSa/s.
  • Adds 16-channel digital input capability to Siglent SDS2000X, SDS2000XP and SDS5000X oscilloscopes.
  • Firmware license key required for operation (sold separately).
Check Stock

Micsig Oscilloscope AC/DC Current Probes with Standard BNC Interface CP2100

  • Maximum measurable current：100Apk（70Arms）.
  • Overload indication：Buzzer beeps, Light flashes.
  • Compatible with all BNC-connected oscilloscopes, adapters can also work with multimeters..
Check Stock

AEMC 5000.14 115V Power Cord for Micro-ohmmeters, Megohmmeters, Power Instruments, Oscilloscopes and Ground Testers

  • Power Cord 115V for Micro-ohmmeters, Oscilloscopes.
  • Power cord 115V for Megohmmeters, Power Instruments.
Check Stock

Gamma Clarity 40 Hz Meditation Lamp

  • SCIENCE BACKED TECHNOLOGY - Clarity devices are designed based on the latest cutting edge science and clinical studies on 40Hz light.
  • PRECISION FLICKER CALIBRATION - Each Gamma Clarity device is calibrated and tested on industrial oscilloscopes to ensure precise frequency and maximum....
  • SAFELY PROMOTES BRAIN HEALTH - Current research shows that 40Hz flickering light induces healthy gamma rhythm in the brain.
  • PLUG & PLAY DESIGN - Everything is included to start enjoying the benefits of 40Hz Light Therapy immediately.
Check Stock

kuman P4100 Universal 100:1 High Voltage Probe for Oscilloscopes for Rigol Atten Owon Siglent

  • Usable with scopes having Bandwidth up to 100 MHz.
  • High sensitivity, excellent performance and reliable function.
Check Stock