Reviews L Turbo Removal

PAGOW Spark Plug Boot Wire Removal Tool Ignition Coil Puller for Volkswagenn Audi VW Hand Install Repair Tool

  • ...n – New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC).
  • Audi – 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD)..
  • Size Inforamtion: The size of spark plug boot removal tool kit: 12.6inch (32cm) overall length, 3.75inch x 0.4inch x 1.2inch (9.5cm x 1cm x 3cm) handle, 9.25inch (23.5cm) shaft, 2.2inch x 0.8inch (5.6cm x 2cm) boot end..
  • Wide Applications: The spark plug puller tool suitable for Bora, Mercedes, Smart, and other Volkswagen and Audi vehicles with similar engines and standard prong plug caps on each side..
  • Easy to Use:Perform spark plug change when engine is cold to prevent the heads from stripping. After pulling the plugs, we recommend applying lubrication to make the job easier. When installing wires, refrain from pushing too hard without the tabs aligned on the tool to prevent the boot end from spreading and getting stuck..
  • Material:The handle of ignition coil puller is made of hard plastic, which can reduce user fatigue, and improve productivity. Shaft and boot end constructed from stainless-steel for maximum strength and longevity..
Check Stock

Lisle 37230 Timing Tool for Ford 3.5L Turbo

  • Timing Chain on 2017 and Newer Ford V6 3.5L Turbo Engines.
  • Helps ensure camshaft alignment during the removal and installation of the timing chain.
Check Stock

U.S. Pool Supply Octopus Handheld Pool Vacuum Cleaner - Cordless, Rechargeable, Powerful 2-Speed Suction, Dual Filtering, Scrub Brush Head, Cleans Removes Debris, Above-Ground, In-Ground Pools, Spa

  • Professional, powerful, and quiet Octopus Cordless Handheld Pool and Spa Vacuum Cleaner. Cordless rechargeable two-speed vacuum cleaner designed for quick and efficient debris removal. The cleaner works excellently in above-ground and in-ground pools and spas. The cleaner is designed to make it safe and easy to clean your entire pool..
  • Innovative Turbo 2-Speed Suction System that provides incredible suction power. The suction can be adjusted from the standard mode of 45 l/m to the high turbo speed mode of 70 l/m for quicker and more efficient debris removal. After the battery is fully charged (charge time 2 to 3 hours), the cleaner will operate for 60 mins at standard speed and 45 mins at high turbo speed..
  • 2-In-1 Detachable Head: Attach the adjustable angle extra-large vacuum head with side bristles for broader debris field collection or use without the vacuum head so the vacuums small mouth opening to and remove debris and grime from hard-to-reach areas like the angles of pool steps, corners, and around ladders. Use the cleaner with the included hand handle or a standard 1-1/4" diameter telescopic pole (pole sold separately)..
  • Dual Filtering System: Cleaner has a dual filter system for extra filtering capacity. The exclusive micro-fine particle filter....
Check Stock

BOSCH GET65-5N 5 In. Dual-Mode Random Orbit Sander

  • MULTI-HOLE PAD SYSTEM: allows flexibility so tool can use a wide variety of 5-inch abrasive discs.
  • DUAL MODE: provides 2 sanding modes, random orbit mode for normal stock removal or fine finishing and "turbo" driven eccentric orbit mode for aggressive stock removal at 5 times the rate of the normal random orbit sanding mode.
  • TURBO MODE: has direct-drive rotation for 3x stock removal of standard random-orbit mode, for an alternative to a belt sander.
  • VARIABLE SPEED: comes with a powerful 6.5 amp variable speed motor (no load speed: 290 to 640 RPM, no load orbit speed: 3300 to 7300 OPM) provide power, flexibility for jobs.
  • EASE OF USE: get fast, smooth finishes on a variety of surfaces.
  • Perfect for normal removal, most sanding jobs, wood floors, furniture finishing and polishing applications.
Check Stock

Vim Tools VIMV244 Oil Filter Plier Four Position

  • Features and benefits: turbo extension is designed for use with flip sockets for wheel removal, turbo extension features a spinning speed handle, can be used with latex gloves, knurled aluminum speed.
  • Features and benefits: filter Pliers are so quick and easy to use.
  • Your other filter tools will be obsolete.
  • Pliers specially designed for removal of screw-on oil filters.
Check Stock

Alpha Rider Clutch Drive Belt Removal Tool Belt Change Tools for Polaris RZR RZR-4 XP Turbo RS1 Ranger XP 1000 Replace 2875911

  • 【Fitment 】Replace OEM Part Number：2875911.
  • The clutch drive belt removal tool for Polaris 2016-2019 RZR XP Turbo / 2016-2019 RZR-4 XP Turbo /....
  • 【Practical Function 】The belt change tools helps prevent damage to the pulley or belt during installation or removal..
  • 【High Quality Material 】The clutch drive belt removal tool is made of great metal, high quality and very durable..
  • 【Package includes 】Metal clutch drive belt removal tool*2.
  • 【After-sales service】100% Brand New. Every product has been strictly tested and tested. If you have any questions, please feel free to contact....
Check Stock

MOSTPLUS Oil Control VVT Valve Variable Timing Solenoid Replaces 10921AA040 Compatible for Subaru Legacy Outback

  • 【OE Part Number】— 917246, 917-246, VVS113, 7V9017, 2T1048, 10921AA040, 10921-AA040, TS1048, 0019495451969.
  • 【Fitment for Saab/Subaru】— Compatible for 2006-2006 Saab 9-2X 2.5L Non-Turbo Models.
  • Compatible for 2006-2006 Subaru B9 Tribeca 3.0L.
  • Compatible for 2005-2010 Subaru Forester 2.5L Non-Turbo Models.
  • Compatible for 2005-2011 Subaru Impreza 2.5L Non-Turbo Models.
  • 【Fitment for Subaru】— Compatible for 2005-2012 Subaru Legacy 2.5L Non-Turbo Models.
  • Compatible for 2008-2009 Subaru Legacy 3.0L.
  • Compatible for 2005-2009 Subaru Outback 3.0L.
  • Compatible for 2005-2009 Subaru Outback 2.5L Non-Turbo Models.
  • 【Features】— This item can control oil pressure to adjust valve timing so that it can improve fuel efficiency.
  • 【Warm Tips】— OEM Replacement, please check your car information before purchase.
Check Stock

7.3L Turbo Compressor Wheel & Upgraded GTP38 Rebuild Kit for Garrett TP38 1994-2003 Ford Powerstroke 446579-0001 170293-360° Thrust Repair Kit - 7.3L Turbo Rebuild Kit By TOPEMAI

  • 7.3L Turbo Compressor Wheel & Upgraded GTP38 Rebuild Kit For 1994-2003 Ford Powerstroke,Replaces 170293,446579-0001, 817-1004-002F,....
  • 7.3L Turbo Compressor Wheel Rebuild kit for 2003 Ford E-350,2003 Ford E-350 Club Wagon,2003 Ford E-450 Super Duty,2003 Ford E-550 Super Duty,2000-2003....
  • 7.3L Turbo Rebuild kit for 1994-1998 Ford F-250,1994-1997 Ford F-350,2000-2003 Ford F650,2000-2003 Ford F750,1994-1997 Ford F Super Duty,1999-2003....
  • Turbo Compressor Wheel kit for ford AKA gtp38 turbo compressor kit,Gtp38 turbo upgrade,7.3 turbo wheel,Garrett tp38 turbo rebuild.This Kit Has a 360....
  • Package Include:7.3L Turbo Compressor Wicked Wheel, Upgraded 360 Degree 5 Oil Port Brass Thrust Bearing, Thrust Collar, Thrust Spacer, Front and Rear....
Check Stock

3PCS Clutch Drive Belt Removal Tool, Clutch Spreader Drive Ranger Belt Removal Tool, Belt Change Tools, for Polaris RZR RZR-4 XP Turbo RS1 Ranger XP 1000 Replace 2875911

  • Compatible: The Clutch Drive Belt Removal Tool can fit Polaris 2016-2019 RZR XP Turbo / 2016-2019 RZR-4 XP Turbo / 2018-2019 Ranger XP 1000 / 2019 Ranger Crew XP 1000 / 2018-2019 RZR RS1..
  • Function: The Clutch Drive Belt Removal Tool helps to prevent damage to belt or pulley during removal or installation..
  • Material: The Belt Change Tools are made of high quality metal, very durable and sturdy..
  • Package Included: 3PCS Yellow Clutch Drive Belt Removal Tool in total..
Check Stock

Vileda Turbo 2-in-1 Microfibre Mop Refill Head, 16.5 x 30 x 22 cm, Red

  • 20% particle pickup — The red fringes on the microfibre mop collect up to 20% more dirt, dust and hair from your hard floors, while the white fringes remove grease and stubborn dirt..
  • Removal of over 99% of bacteria *— Thanks to the advanced microfibre technology, Vileda Turbo 2in1 mop removes over 99% of bacteria with just water – no chemicals needed..
  • Suitable for all hard floor surfaces — The spin mop refill can be used to remove stubborn and greasy dirt on all hard-surfaced floors, including finished hardwood, ceramic tile, linoleum and even delicate materials like parquet..
  • Compatible with all Vileda spin systems —Vileda Turbo 2in1 mop can be easily attached to all Vileda spin mop systems: Vileda Turbo, Vileda Turbo Smart and Vileda Easy Wring & Clean..
Check Stock

BOSCH Power Tools - GET75-6N - Electric Orbital Sander, Polisher - 7.5 Amp, Corded, 6\\\ Disc Size - features Two Sanding Modes: Random Orbit, Aggressive Turbo for Woodworking, Polishing, Carpentry

  • Dual mode: Provides 2 sanding modes, random orbit mode for normal stock removal or fine finishing and "turbo" Driven eccentric orbit mode for aggressive stock removal at 5 times the rate of the normal random orbit sanding mode.
  • Variable speed: The GET75 6N comes with a powerful 7. 5 amp variable speed motor (no load speed: 290 to 640 RPM, no load orbit speed: 3300 to 7300 OPM) provide power, flexibility for jobs.
  • Ease of use: Get fast, smooth finishes on a variety of surfaces.
  • Passive dust collection system: Passive dust collection system that requires a vacuum cleaner and hoses.
  • Accepts Bosch VAC001, VAC009 and VAC010 hoses (sold separately) or a Bosch VAC002 hose adapter (included).
  • Orbital sander Package includes: The GET75 6N unit includes 1 (1) soft backing pad, 1 (1) hex pad wrench, 1 (1) sanding disc, 1 (1) removable front handle, 2 (2) vacuum hose adapters.
  • Perfect for normal removal, most sanding jobs, wood floors, furniture finishing and polishing applications.
  • Turbo mode – has direct-drive rotation for 3x stock removal of standard random-orbit mode, for an alternative to a belt sander.
  • Multi-hole pad system – allows flexibility so tool can use a wide variety of abrasive discs.
Check Stock

55587854 Pipe Turbo Oil Return Pipe Tube for Chevy Cruze Sonic Trax Buick Encore 1.4L Engine Turbocharger Oil Return Hose Line 55569839

  • [Fitment] - Turbo oil return hose tube line fit for 2011- 2019 Chevrolet Cruze 1.4L, for 2016 Chevrolet Cruze Limited 1.4L, for 2012-2019 Chevrolet....
  • [Replace Part Number] - Turbo oil return pipe tube replace number is 55587854 55569839..
  • [Please Note] - This oil tube pipe usually fails when the turbo get too hot or suggested to change whenever the oil turbo hose is replaced..
  • [Material] - Engine turbocharger oil return hose made of high quality materials, supplier quality similar as original. 55587854 pipe direct....
  • [What You Will Get] - We offer 55587854 turbo oil return pipe tube Fitor chevy cruze worry-free 2-years service, any questions about the turbo oil....
Check Stock

SuperATV Rear Receiver Hitch for 2017+ Polaris RZR XP Turbo l 2017+ Polaris RZR XP 4 Turbo l Red l 1,500 lb Max Towing Capacity l Made of 3/16' Heavy-Duty Steel

  • 【Fits】2017+ Polaris RZR XP Turbo l 2017+ Polaris RZR XP 4 Turbo l NOTE: Not compatible with Polaris Factory Rear Bumper or a SuperATV Rear Bumper.
  • 【Make Work Easy】SuperATV’s 2” Red Receiver Hitch for the Polaris RZR XP Turbo is made with 3/16” heavy-duty steel plating and hand welded for superior strength. It’s finished with a UV resistant powder coating for years of hard use. When you’re ready to get real work done, get a SuperATV Receiver Hitch..
  • 【Versatile】This RZR hitch uses a standard 2-inch by 2-inch receiver, so you can install more than just ball mounts. You can do more on your off-road adventure with a bike rack or gun rack. Put the utility back into UTV with a tow hook or cargo rack. Our receiver hitch makes it possible..
Check Stock