Reviews Kuman Raspberry Pi Cases

GeeekPi Raspberry Pi 4 Fan Heasink, Raspberry Pi Aluminum Heatsink Cooling Kit for Raspberry Pi 4B/3B/3B+ (B Plus)

  • It's fit for Raspberry Pi 4B and Raspberry Pi 3B+.
  • It's compatible with most of cases in the market.
  • Use CNC Machining manufacturing technology for Aluminum heatsink.
  • With 2pcs little thermal tapes to attach to the CPU and LAN tightly for better dissipation.
  • The cooling fan updated to 3510 version and it will be more quiet and powerful for heat dissipation of Raspberry Pi Board.
  • Package Includes: 1x Cooling Kit( Aluminum Heatsink with Cooling Fan), 1x Think Copper Heatsink For Pi 3B+, 2x Thermal Tapes for Pi 3B+,2x Thermal Tapes for Pi 4B.
Check Stock

Arducam 16MP Autofocus Quad-Camera Kit for Raspberry Pi, 16MP IMX519 Autofocus Synchronized Raspberry Pi Camera, Compatible with Nvidia Jetson Nano/Xavier NX

  • Designed for Raspberry Pi Camera: This Quad- Camera kit allows you to connect four 16MP IMX519 raspberry pi cameras to a single standard pi board and capture images or video at the same time..
  • Four in One: Combine four cameras into one frame, each with a resolution of 1/4.
  • the maximum output you can get: 4656 x 3496 for still images and 1920x1080 for video. Please note the frame rate for video and still images will drop to half the frame rate you would normally get with a single camera..
  • Wide compatibility: It is compatible with the latest Raspberry Pi camera software (libcamera) and uses the official Pi camera tuning algorithm. It also supports multi-platform multi-camera solutions such as Raspberry Pi, Jetson Nano, Xavier NX and many more. And this Camarray HAT is also compatible with Raspberry Pi 3 and Raspberry Pi (V1/V2/HQ) cameras..
  • Applications: Multiple camera processing technologies have enabled VR (Virtual Reality), AR(Augmented Reality), and other applications like SLAM (Simultaneous Localization and Mapping). Synchronized video streams with Raspberry Pi could be used for many use-cases (e.g., stitching, 3D sensing, tracking, …) before investing in an expensive video multiplexer hardware..
  • Please note: The cameras in the set are specifi....
Check Stock

kuman Breadboard Jumper Wires 40pin Male to Female Ribbon GPIO Cable for Connection Raspberry Pi 4B 3 2 Model B B+ w/ 3.5” 5 inch Touch TFT Screen LCD display K70

  • IDC 40pin Male to Female Ribbon Cables Kit flat GPIO Cable 40pin Rainbow flat cable.
  • Cable for PI board and kuman SC06 SC5A 3.5 inch 5 inch LCD Panel.Upgraded for Raspberry Pi 3 2 B B+ rpi 1 B Model B+.
  • Each cable length: about 20cm /8-inch. standard 0.1"(2.54mm).
  • The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced headers..
  • Made of high-grade copper wire material for safe and durable to use..
Check Stock

UCTRONICS Fan Adapter Board for Raspberry Pi Upgraded Complete Enclosure and Raspberry Pi Cluster Case, Compatible with Raspberry Pi 3/3B+/4B, Output 5V Power

  • This fan adapter board is designed for Raspberry Pi desktop cluster cases and supports any Raspberry Pi motherboard with micro USB or USB C power..
  • With 4 pins on the adapter board, it can provide 5v power to two fans, which is the best way to power your fans when your Raspberry Pi GPIO is occupied by the PoE hat and keep your device cool at all times..
  • Plug and play: The fan adapter fits any 5V fans with an XH2.54 duplex connector. Simply plug the red wire of the fan connector into the positive and the black wire into the negative to run. Size:0.51*0.59 inch..
  • Compatible ASIN List: Raspberry Pi Complete Enclosure: B09JNHKL2N, B09S11Q684.
  • Raspberry Pi Cluster Case: B099RR1ZCT, B09K439BTY all are suitable for this fan adapter..
Check Stock

Lanpu 30 PCS Raspberry Pi Heatsink Kit Copper Raspberry Pi Aluminum Heatsink for cooling cooler Raspberry Pi 3, Pi 2, Pi Model B+

  • Package includes 20 black anodized aluminum & 10 copper heatsink.
  • Suitable for Raspberry Pi models A, B, B+, 2, and 3 boards.
  • Can be applied with other devices for cooling VGA RAM, IC Chips, Mosfet SCR, Southbridge , Northbridge etc.
  • Adhesive thermal tape backing, Raspberry pi not included.
  • These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases..
Check Stock

MaticBox Case for Raspberry Pi 3 / Pi 2 / Tinker Board – Low Profile, Stackable, Universally Mountable DIN Rail, Automation Friendly, Fan Support (Black)

  • Featured here is a single case that can be configured for different applications. It is compatible with Raspberry Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Asus Tinker Board (NOT compatible with Raspberry Pi 4). This is just a case, Raspberry Pi / Tinkers Board is NOT INCLUDED.
  • Can be mounted to flat surfaces, DIN rails, or to any object via zip ties.
  • Cases can be stacked to form clusters of single board computers.
  • Supports 25*25mm fans from 5mm to 10mm tall. Fans can be attached directly into the case body, or using the provided fan adapter (FAN NOT INCLUDED).
  • Comes with two covers – Low Profile cover when hosting just the single board computer and Automation cover for extra space when hosting extension boards with larger relays, terminals and connectors.
Check Stock

104 Pcs Raspberry Pi 4 Heatsink, MazerPi Raspberry Pi Heatsink Set Aluminum Heatsink with 3M 8810 Thermal Pad Copper Heatsink for Raspberry Pi 4 Model B/ 3B+/ 3B/ 2B

  • High Perfromance Raspberry Pi heatsink with Thermal Conductive Adhesive Tape..
  • Fits for Most of Raspberry Pi models, compatible with most Raspberry Pi cases..
  • 8810 Thermal conductive adhesive tape backing, good performance on heat dissipation and long lasting..
  • Also could be used with other devices such as the Beaglebone..
Check Stock

Servo Driver HAT 16-Channel 12-bit I2C Interface PWM Outputs for Jetson Nano Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B Supports SG90 MG90S MG996R etc @XYGStudy

  • Servo Driver HAT for Raspberry Pi, 16-Channel, 12-bit, I2C Interface.
  • Needless to say, the Raspberry Pi is powerful enough in most cases, yet it's not that good at providing precise PWM output. You may have tried to....
  • Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later version, Jetson Nano.
  • I2C controlled, using only 2 pins Standard servo interface, supports common used servo such as SG90, MG90S, MG996R, etc..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
Check Stock

Pastall 100 PCS (8 Different Sizes) Heatsink Kit with Conductive Adhesive Tape, Aluminum Heat Sink Cooler and Copper Heatsink for Raspberry Pi A B B+ 2/3/4

  • ❤ The 100 PCS (8 Different Sizes) heatsink kit with conductive adhesive tape, Easy to use and could effectively provide good heat dissipation..
  • ❤ As a Raspberry Pi heat sink (using as raspberry pi 4 heatsink/raspberry pi 3B+ heatsink), it has good heat dissipation performance and compatible with most Raspberry Pi cases..
  • ❤ The heat sink is equipped with high-performance thermal conductive adhesive, high viscosity, durable and long lasting..
  • ❤ This small heatsink kit included : 80 pcs aluminum heatsink + 20 pcs copper heatsink( It Contains 8 different sizes of heat sink,Please check the specific size on the picture)..
  • ❤ the heatsinks also could be used for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator.It is an excellent heat sink for heat dissipation in electronic DIY,You will love it!.
Check Stock

UCTRONICS PoE HAT for Raspberry Pi 4B, IEEE 802.3af-Compliant, 5V 2.5A Mini Power Over Ethernet Expansion Board for Raspberry Pi 4 B 3 B+

  • Improvement: Based on the original U6109, we have improved the device compatibility to be compatible with more brands of switches.
  • also compatible with non-standard 48v power supply (only through 45+, 78-).
  • PoE input 40-57V with multiple protection circuits..
  • Designed For RPi 4 and 3 B+: This PoE HAT can be used to deliver clean and reliable power to the raspberry pi 3 model B+ and raspberry pi 4 model B (not included)..
  • Mini-Size: Nearly half the official size, does not occupy the GPIO pins of Raspberry Pi, saving more space for your other hardware, while still being able to be housed in most Raspberry Pi cases..
  • Well-ventilated Environment Recommended: It’s normal to become hot when the HAT operates. Please make sure the adequate air circulation to help it dissipate heat to ensure stable operation..
Check Stock

HiFiBerry HighPi Raspberry Pi Case - Raspberry Pi4

  • Rapid, Tool-Free Assembly - The HighPi case sets the standard for ease of use and versatility in Raspberry Pi cases. Installing or removing the Raspberry Pi PI4 board is astonishingly quick, simple, and secure.
  • all without tools or assembly. One snap action locks the Pi board into the case.
  • the second secures the lid, rattle free. Remove the Pi board and the lid with one-finger-releases for each. Genius!.
  • Fits All Kinds of Hats - Whether you’re running a plain Pi4 board or modding it to the max, the HighPi case has your Pi covered. Generous internal room allows HATs, break-out boards, or heat sinks. Vents on three sides double as fly-through cable ports for the GPIO and whatever else you need to connect to. Supports PI POE Hat, HiFiBerry Hats, Serial Hat, UPS HAT and more!.
  • The HighPi case can be wall mounted horizontally with two screws for easy removal, or mounted in any orientation including upside-down with four screws from inside the case (Screws not included). When wall mounted horizontally, the A/V and audio cables hang downward from the Pi, improving visual tidiness and reducing the need for support of heavy cables..
  • High quality ABS plastic case, designed and made in Canada, Large internal volume for HATs, break-out boards, or heat sinks, Ven....
Check Stock

Seeed Studio ReSpeaker 4-Mic Array for Raspberry Pi, Raspberry Pi Microphone

  • ReSpeaker 4-Mic Array for Raspberry Pi（Pi 3/Pi 4 B +) is a 4 microphone expansion board for Raspberry Pi designed for AI and voice applications. This means that you can build a more powerful and flexible voice product that integrates Amazon Alexa Voice Service, Google Assistant, and so on..
  • Different from ReSpeaker 2-Mics Pi HAT, this board is developed based on AC108, a highly integrated quad-channel ADC with I2S/TDM output transition for high definition voice capture..
  • Besides, this 4-Mics version provides a super cool LED ring, which contains 12 APA102 programmable LEDs.With that 4 microphones and the LED ring, Raspberry Pi would have ability to do VAD(Voice Activity Detection), estimate DOA(Direction of Arrival) and show the direction via LED ring, just like Amazon Echo or Google Home..
  • This Raspberry Pi microphone support all Raspberry Pi models, including Raspberry Pi Zero, Raspberry Pi 1 B+, Pi 2 B, Pi 3 B, Pi 3 B+，Pi 4 B..
  • ReSpeaker 4-Mic array does not have audio output. If this is a requirement please consider the ReSpeaker 6-Mic Circular Array Kit For Raspberry Pi, the ReSpeaker 4-Mic Linear Array Kit for Raspberry Pi , or the ReSpeaker Mic Array v2.0..
Check Stock

Smraza Raspberry Pi 3 B+ Case with Fan, 5V 2.5A Power Supply and 3 Heat Sinks for Raspberry Pi 3 Model B+ (B Plus), 3B, 2B

  • ✓ The Latest Version 9 Layers case for Raspberry Pi 3 model B+ / Raspberry pi 3 /pi 3 model b / pi 2 / pi 2 b (Not include Pi Board).
  • ✓ Raspberry Pi Case has the layout design for the Raspberry pi 3 model b+ and will perfectly protect your pi components.
  • ✓ Easy to access all GPIO ports - Raspberry pi case with cutout to allow Pi's GPIO, HDMI, USB, SD, Power Supply and Other GPIO Ports access.
  • ✓ Made of Acrylic, the raspberry pi 3b case Won’t Block your raspberry pi's Wifi / Bluetooth Signal.
  • ✓5V 2.5A power supply with 59 Inch power cable is durable, on/off switch would cause less wear and tear on your raspberry pi's power port. Package Include: Raspberry Pi 3 B+ Case, Fan, 3 Pcs Heatsinks, 2.5A Power Supply.
Check Stock