Reviews Komatsu Track Bolt

Fit for Airman AX30UR-2 Mini Excavator Top Roller Upper Roller

  • A FL-TRACK Machinery Co, Limited has been a well-established professional manufacturing company, focused primarily on producing undercarriage spare parts for mini and large Excavator and bulldozer for more than 20 years. Our clients have been the well-known companies like Volvo, Caterpillar, Hitachi, Mitsubishi, Komatsu among many others..
  • Shipping by air,shipping by fastest shipping office like DHL.
  • There are more than 10,000 kinds parts in stock,A lots parts are listing,if you can't find what you looking for,pls contact us..
Check Stock

1-1/2\ T-Slot Bolt

  • Built to last:Compared with mormal stainless steel,it's more antirust and corrosion-resistant.
  • Unlike standard bolts and screws, these threaded wood inserts T bolts will not strip easily or over tighten..
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place..
  • Application:Widely used for aluminum alloy, rack assembly and clamping lock,T-slot track or wooden groove, but can also be used when building furniture, assembling sheds, decks, and cabinetry, or installing speakers or caster wheels..
Check Stock

DCT Tee Bolt Set – 20 Pack 1in T Bolts for Woodworking T Track Bolts Jig Bolts 1/4in 20 Thread T Bolt

  • CUSTOMIZE YOUR JIGS, FIXTURES, AND T-TRACK: Experienced woodworkers use jigs regularly to create accurate, repeatable cuts quickly.
  • The DCT 20 Pack of T Slot Bolts provides you with premium quality tee bolts to be used to create a router fixture, cabinet hardware jig, drawer pull jig, or other woodworking jigs.
  • These “T” shaped wood bolts can be used with T nuts, knobs, or T tracks to create a variety of projects.
  • T SHAPE PROVIDES VERSATILITY: Each piece is precision machined for quality, strength, and accuracy.
  • T shaped head features a 7/16 x 5/8 inch (11 x 16mm) surface and a 3/32 inch (2mm) thickness and fits inside T-slot track or wooden groove.
  • These furniture bolts and barrel nuts are ideal when building furniture, assembling sheds, decks, and cabinetry, or installing speakers or caster wheels.
  • BUILT TO LAST: Constructed of grade 2 steel for strength, durability, and longevity.
  • Zinc-plated for resistance to rust and corrosion.
  • Unlike standard bolts and screws, these threaded wood inserts T bolts will not strip easily or over tighten.
  • PERFECT SIZE FOR YOUR NEEDS: These T slot bolt wood fasteners have a length of 1 inch (2.5 cm) and a thread per inch of 20.
  • The diameter of the bolt stem is 1/4 inch (.6 cm).
  • EASY TO USE: Measure and cut your bolt ....
Check Stock

M12X80 T-Slot Bolt 20 pcs.

  • Total Size: 18 x 8 x 25.5mm/0.71'' x 0.31'' x 1.00"(WxTxH).
  • Material: T-Bolts are made from high quality carbon steel, surface is plated with chrome-plated for good rust resistance and better performance high hardness and a long service life.
  • Advantage: T-Shaped Bolts are great to have around for use in wet environments, durability and longevity.
  • Application: 4545 Series Aluminum Profile Accessories widely used for building 3D printers, 3D carvers, CNC routers, CNC laser cutters, CNC plasma cutters, machine guards, workstations, etc.
  • Easy to use: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
  • Once the track has been established, you can easily slide the T bolt into place and use a knob or T nut to tighten and hold the bolt in place (track, knobs, and tee nuts not included).
Check Stock

Stens - 120-694 Transmission Filter Kubota HH660-36060 ea 1

  • Specs: Description: Transmission Filter, Thread: 3/4"-16, OD: 3 1/8", Height: 4", Micron: 20, Made By: An OEM Supplier, Packaging type: Branded box,....
  • Replaces OEM Numbers: Allis Chalmers: 2097690, CaseIH: 1972202-C1, 1972202C1, Caterpillar: 3I1164, Clark Equipment: 1804084, Komatsu: 1350-5344,....
  • Compatible with: Allis Chalmers: 5020, 5030 and 6140, Case: 1825, Komatsu: AX Series, FG10ST-15, FG18ST-15, FG20, FG20ST-04, FG20ST-11, FG20ST-12,....
  • Stens branded parts are trusted by professional dealers to perform OEM quality repairs. The Stens name is featured on all Genuine Stens product....
Check Stock

T Track Hold Down Clamps Woodworking T Slot Clamp 20mm Dog Hole Clamp Quick Acting Aluminum Alloy

  • ...f time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences..
  • Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
  • The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
  • The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
  • For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can exert up to 400 pounds of clamp pressure depending on how you set it..
Check Stock

DCT 5 Star Knobs Kit 5/16in-18 Threaded Knob, Bolt with Knob, Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 5/16-Inch-18 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 5/16-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 5/16-inch (7.9mm) diameter and 18 threads per inch (if you turn a nut 18 revolutions it will move 1 inch).
  • Bolts and washers are 5/16”-18 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 5/16-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includes ....
Check Stock

DCT 5 Star Knobs Kit 1/4in-20 Threaded Knob Bolt with Knob Clamping Knob Jig Knobs T Track Knobs and Bolts 4-Pack

  • TIGHTEN & ADJUST JIGS, FIXTURES, FENCES: The DCT | 5 Star Knob T Track Knobs Kit with Bolts & Washers 4-Pack is a package of screw-on clamping knobs that can be used on your existing saw fence, drill press, lathe, routing jig, fixture, feather board, or anywhere else that a 1/4-Inch-20 internal thread is required.
  • Many 3/4-inch wide x 3/8-inch deep (19.1mm x 9.5mm) T-tracks will not only accept this knob set but will allow you to use the 1/4-inch T-bolts.
  • PERFECT SIZE: Knobs have a 2-inch diameter and 1-inch height (5.1cm x 2.5cm).
  • T track knob threading has 1/4-inch (6.4mm) diameter and 20 threads per inch (if you turn a nut 20 revolutions it will move 1 inch).
  • Bolts and washers are 1/4”-20 x 1-1/2-inch.
  • Works with any material that is less or equal to 1-inch in thickness or any T-track that accepts standard 1/4-inch bolt heads.
  • EASY TO USE: Insert the bolt into the T-Slot head down with the screw facing upwards, place the washer on the threaded bolt facing upwards, thread the T knob onto the bolt, then lock the entire unit in place on your T-track.
  • Ergonomic design of this plastic knob set allows for easy adjustment and tightening with maximum control and agility without the use of additional tools.
  • BUILT TO LAST: T knobs package includ....
Check Stock

DCT Tee Bolt Set – 20 Pack 1-3/4in T Bolts for Woodworking T Track Bolts Jig Bolts 1/4in 20 Thread T Bolt

  • CUSTOMIZE YOUR JIGS, FIXTURES, AND T-TRACK: Experienced woodworkers use jigs regularly to create accurate, repeatable cuts quickly.
  • T SHAPE PROVIDES VERSATILITY: Each piece is precision machined for quality, strength, and accuracy.
  • T shaped head features a 7/16 x 5/8 inch (11 x....
  • BUILT TO LAST: Constructed of grade 2 steel for strength, durability, and longevity.
  • Zinc-plated for resistance to rust and corrosion.
  • PERFECT SIZE FOR YOUR NEEDS: These T slot bolt wood fasteners have a length of 1-3/4 inch (4.4 cm) and a thread per inch of 20.
  • EASY TO USE: Measure and cut your bolt channel groove or use a pre-cut T-track that meets the size of your T bolt head.
Check Stock

DC Cargo E-Track Adapter Straps (Pack of 2) - Convert Bolt-On Retractable Ratchet Straps to E-Track Straps - Must-Have E-Track Accessories - 2,500 lbs.

  • Add mobility to your bolt-on retractable ratchet straps.
  • use these E-Track adapter straps to connect them to your E-Track instead of bolting them down.
  • adapter straps click easily in and out of E-Track for effortless tie-down adjustment.
  • each 2” E-Track adapter strap has an 833 lb. working load limit and 2,500 lb. break strength.
  • featuring chafe-resistant polyester webbing and zinc-plated steel parts.
  • Includes (2) 2” x 7” polyester E-Track adapter straps with ½” bolt holes and zinc-plated steel E-track end fittings.
Check Stock

Cam Action T-Track Quick Release Hold Down Clamp for Jigs, Fixtures & Shop Fences. Ideal for Router and Drill Press Table Fences and Many Shop Built Jigs, Sleds and Fixtures (2, 1/4' Cam Action Clamp)

  • ...f time tightening and loosening knobs on your jigs and fixtures? Or maybe your are constantly rotating knobs on your router table or drill press fences..
  • Our exclusive cam clamps will solve your problem and provide you with a quick release clamping system for all of your jigs, fixtures and some fences that rely on a track system. Having a cam clamp on your router table fence makes is so much easier to make quick adjustments and quickly lock the fence in place..
  • The clamp body is made out of aluminum, measures approximately 1-1/2” long and each clamp has a standard 3” long hex head bolt that works with most standard sizes of t-track (depending on which size Cam Action Clamp you purchase). Be sure to get the correct size for your needs. Typically that means you should check to see what size slot or track you would like to use the clamps in..
  • The Cam Action Clamps are available in ¼” 5/16” and 3/8” hex head bolt sizes. Another nice feature of the Cam Action Clamps is that you can swap the bolts out for different situations..
  • For instance, if you have a slot requiring a T-bolt, you can switch out the ¼” hex head bolt with a ¼” T-bolt. Each cam can exert up to 400 pounds of clamp pressure depending on how you set it..
Check Stock

POWERTEC 71484 T-Track Knob Kit w/ 7 Star Threaded 1/4-20 Knobs Bolts and Washers for Woodworking Jigs and Fixtures – Set of 4 Black

  • INCLUDES: (4) 7 Star Knobs, (4) T-Bolts, (4) Washers and (1) Storage Case.
  • FUNCTION: Works with any universal track, t-track and double cut that accepts standard 1/4 inch bolt heads – helping to secure various jigs and fixtures while optimizing your favorite t-track assemblies.
  • FEATURES: Premium black knobs constructed out of a robust and heat resistant Polypropylene plastic, paired with an ergonomic design for smooth handling and comfort, plus molded plated steel inserts that are corrosion and rust resistant and designed for anti-stripping.
  • EASY TO USE: Simply insert the head of the t-bolt into the track with a washer and align it with the threaded knob. These woodworking jig knobs can easily be utilized to enhance an assortment of applications, including your miter gauge or t-track fences, stop blocks, featherboards and so much more.
  • SPECS: Knobs possess a 1-1/2” diameter and 1” height (3.8cm x 2.5cm) | threaded knob is 1/4-inch (6.4mm) diameter by 20 threads per inch | Bolts and washers are 1/4”-20 x 1-1/2-inch.
Check Stock

Powered Sliding Gate V Groove Wheel 6 x 1-3/4 - 5000 lbs Capacity -Mapp Caster

  • Designed for automatic or powered sliding gates that run on a v-track (angle iron).
  • Popular replacement for Liftmaster AH110 & HT5000, Platinum Access VGW-5000, and DoorKing 1201-000.
  • Maintenance free and deisgned for continuous cycle operation - 5,000 pounds capacity.
  • Can be used with 1/2" or 5/8" Bolt - Hub length (where bolt goes through) is 2" wide.
  • 7/8" V-groove width, 7/16" depth - Work best with 1" or large angle iron (v-track).
Check Stock