Reviews Knurled Brass Screw

10 Pack Solid Brass Diamond Knurled Thumb Screws Knobs with Straight Shoulders Right-Hand Threads SAE Flat Tip Uncoated (10-32 x 3/8 inch Long Threads)

  • 10 pack/pieces knurled head solid brass thumb screws with straight shoulders and flat tips.
  • The knurled surface on these thumb screws provides optimal gripping allowing the screw to be tightened and loosened by hand pressure alone eliminating the need for tools. Knurled head screws are common in applications requiring frequent fastening and unfastening..
  • Available in the following SAE thread sizes: 6-32, 8-32, 10-32, 1/4-20, 5/16-18 and 3/8-16.
  • Made from solid brass which is a corrosion-resistant alloy..
Check Stock

Tektall 61360 3pc Brass Drift Punch Set,Hand Tool Punches Tools for Home use

  • 【Made from Brass】 Tektall Drift Punch Set made from brass for non-sparking applications critical in hazardous conditions..
  • 【Used for Non-marring Applications】 Brass tools will not marr components that are harder than the tool itself.In cases where appearance is important, brass tools are recommended..
  • 【Knurled Design Handles】 Handles have a knurled grip for a more secure grasp of the tool..
  • 【Package Includes】 25075 - 3/4-Inch Brass Drift Punch Knurled, 25076 - 1/2-Inch Brass Drift Punch, and 25077 - 3/8-Inch Brass Drift Punch..
  • This kit work great if you need a nonmaring punch. The knurling is nice and grippy..
Check Stock

2 Pcs Mini Steel Tube Cutter Tool, Mini Tubing Cutter Pipe Cutter Tube Cutter Tool of Diameter from 1/8 to 1-1/8 Inch (3-28 Mm), Tube Pipe Cutter for Copper Brass Aluminum, Thin Stainless Steel Tube

  • ..., thin steel and PVC pipes with 1/8 to 1-1/8 inch (3-28 mm) outer diameter.
  • This mini tube cutter provides a fast way to do a clean cut.
  • Convenient and Powerful: our small pipe cutter fits nicely in restricted spaces.
  • The mini steel tube cutter tool features a strong yet lightweight slide and wheel housing and large knurled screw knob for easy control of cutting pressure.
  • Large knurled feed screw knob provides users with ultimate cutting pressure control to produce clean cuts.
  • Multifunctional Pipe Cutter: this tube cutter tool fits for use on construction sites, plumbing jobs, HVAC and refrigeration, heating, manufacturing, decorating or even at garage repair shops and so on.
  • Specifically designed for use in restricted spaces to make tight cutting jobs significantly easier and more manageable.
  • Easy to Operate: cutting thin stainless steel tubing has never been easier.
  • Simply rotate the knob to grip tube, revolve tube cutter around the pipe, tighten grip smoothly after each full circle until full cut.
  • It's never been this effortless to cut thin stainless steel tube.
Check Stock

61360 3 Pc. Knurled Brass Drift Punch Set 25077 3/4 Inch 25076 1/2 Inch 25075 3/8 Inch Drift Punch Gold

  • Function: Aligning steel, car repairs, motorcycle repair,oil, Gas, chemical, and mining applications etc..
  • Feature:Non-Marring/Non-Sparking, will Not Damage Harder Steel Materials,not easy to damage, will be more durable..
  • Polished Non-slip design: Full-polish finish wipes clean easily and resists rust or corrosion，Non-slip..
  • Package includes:1x25075 3/4 Inch knurled brass drift punch,1x25076 1/2 Inch knurled brass drift punch,1x25077 3/8 Inch knurled brass drift punch..
  • Service:Slother aim to providing you with better products and services. You can contact us first for any problem or concern, your problem will be figured out with our support..
Check Stock

NICERYIG 3/8 Inch and 1/4 Inch Camera Quick Release Screw Tripod Screw Adapter Connecter DSLR Camera Rig Accessories

  • 1/4" and 3/8" Stainless steel (metal) Tripod screws..
  • Can be used with camera mounting plate,quick release plate, tripods,monopods,etc..
  • 1/4" screw: Tripod quick release screw with standard 1/4"-20 thread, Compare to Manfrotto brand. 14mm diameter knurled head, approx 5mm threaded,....
  • 3/8" screws: Quick Release Screw with standard 3/8"-16 thread, Compare to Manfrotto brand. 12mm diameter knurled head, approx 7mm threaded, total....
  • Package Includes: 2x 1/4"-20 screw, 2x 3/8"-16 screw.
Check Stock

JIFETOR 3 Way AC Manifold Gauge Set, HVAC Diagnostic Refrigerant Charging Tool for Auto Household R404A R134A Refrigerant, Quick Couplers Adapter Valve Core Tool (3FT Hose, Can Tap, Blue Case)

  • ...rass fittings for easy connection. Red hose connects red gauge side 1/4″ male flare to red quick coupler, blue to blue, and yellow hose connects AC gauge middle charging port to can tap or vacuum pump.
  • AC R134A QUICK COUPLERS: Premium brass and aluminum, quick interface design with accurate snap lock and anti-slip knurled grip ring, easy to connect and disconnect, compatible with all models with R134A service port. Connect the blue coupler to AC suction service port and the red one to AC discharge service port. Aim at service port, push to connect and lock. Pull up the knurled grip ring to loose and lift to disconnect.
  • ACCESSORIES AND CASE: R134A piercing-type can tap with 1/2″ female thread interface, can screw to fix on 1/2″ male thread of refrigerant bottle opening. T type knobs, easy to operate by fingertips. Internal pin with sharp tip help to pierce R134A bottle easily and quickly. Customized blow molding case keeps everything in place and protects the gauges during storage. A detailed instruction, a hose valve accessories kit and adapter with shut off valve are included in the case.
  • SATISFACTORY CUSTOMER SERVICE: JIFETOR complete AC manifold gauge set is perfect for automotive and residential air conditioner evacuation/vacuum, diagnostic ch....
Check Stock

Astromania 2\ 2.5X Barlow Lens - Allows The use of Both 2\ and 1.25\ eyepieces

  • The barlow increases the magnification of any 2" or 1.25" eyepiece by two and a half times..
  • Fully Multicoated Optics, 4-element lens system. Hard-anodized aluminum barrel is threaded to accept 2" filters..
  • 2.5x Magnification, anodized Aluminum Housing. 2" Barrel Diameter..
  • A 2" to 1.25" adapter is included, allows the use of both 2" and 1.25" eyepieces..
  • Brass compression rings with knurled set screw grips securely hold eyepieces without marring the eyepiece barrel's finish..
Check Stock

Jaws of Life: Stories

  • Mainly used for cutting of soft and hard copper, aluminum, brass, plastic tubes, thin-walled stainless steel pipes and other thin pipes or tubes. Please note not suitable for bike seat or bike handlebar cutting, only for soft or thickness wall ≤3.8 mm tube.
  • Spurtar Pipe Cutter is a Must have Steel Cutting tool for every plumbers, electricians, vehicle mechanics, homeworkers for hobby or proffesional work.
  • The tube cutter has a sturdy, lightweight slide, wheel housing and large knurled screw knob for easy control of cutting pressure for clean cuts..
  • Metal pipe cutting tool with adjustable cutting capacity range between 3mm to 28mm (1/8 inch to 1-1/8 inch).
  • Anti-scratch electrostatic powder coating reduces the effects of static electricity during use, resistant to corrosion and rust..
Check Stock

Hilitchi Plastic Screw On Type Knurled Clamping Nuts Knob Handle Star Knob Black Threaded Hand Knob Assortment Kit-32PCS

  • Made of plastic, good toughness, strong anti-aging ability, zinc plating on the surface of the screw, corrosion resistance..
  • M4/M6/M8/M10 Brass Thru Hole Female Thread Star Knob Assorted Kit. Featuring with star shape knurled knobs, this allows for easy installing, using and disassembling, save time and energy!.
  • This Plastic Hand Knob Screw is easy to install and remove and does not require any tools.Widely used in furniture decoration, electronic equipment, mechanical equipment and other related industries.
  • Our star knobs work well on cabinet, drawer, door, lockers, toolbox and other furniture or equipment that require frequent adjustments. Can be tightened or loosened by hand..
  • If you do not satisfy with our products or any questions, please come to us at anytime. 12 hours quick response service..
Check Stock

AIEASY MINI Steel Tube Cutter Tool, Cutting (3-28mm) 1/8 inch to 1-1/8 inch Copper and Aluminum Tube Pipe Cutter

  • Mainly used for soft and hard copper, aluminum, brass and cut plastic tubes.
  • Specially designed for small diameter tubes in confined spaces.
  • The tube cutter has a sturdy, lightweight slide, wheel housing and large knurled screw knob for easy control of cutting pressure..
  • Metal pipe cutting tool with 3-28mm 1/8 inch to 1-1/8 inch cutting capacity.
  • Anti-scratch electrostatic powder coating reduces the effects of static electricity during use..
Check Stock

uxcell M4x10mm Flat Knurled Head Fully Threaded Thumb Screws Bolts Fastener 15pcs

  • Thread Size: M4 x 10mm/ 0.16" x 0.4" (D*L).
  • Package Content: 15pcs x Knurled Thumb Screw.
Check Stock

RIDGID 32985 Model 104 Close Quarters Tubing Cutter 3/16-inch to 15/16-inch Tube Cutter

  • CLOSE QUARTERS TUBING CUTTER: Makes clean and precise cuts on copper, brass, aluminum, and plastic tubing with a small diameter capacity of 3/16 in. to 15/16 in..
  • EFFICIENT COMPACT DESIGN: Specifically built for use in restricted spaces to make tight cutting jobs significantly easier and more manageable.
  • CONVENIENT AND POWERFUL: Features a strong yet lightweight slide and wheel housing for ease of operation and long-lasting durability.
  • OPTIMAL CONTROL: Large knurled feed screw knob provides users with ultimate cutting pressure control to produce superior clean cuts.
  • MAXIMUM ACCURACY: Constructed with a high-quality steel cutting wheel for a long life and a spare wheel stored in the knob.
Check Stock

beiyoule 6PCS 1/4inch Hex Shank Aluminum Alloy Screwdriver Bits Holder Extension Bar Drill Screw Adapter Quick Release Keychain Easy Change

  • Package included: 1pcs knurled screwdriver bit holder + 2pcs adjustable length Screw Drive Guides, meet the needs of driving screws in different situations.
  • The Screw Drive Guides are not just bit tip holder, its self-retracting guide sleeve can slide to cover the long screw and helps to position the screw while driving screws. Get this to save screws from wobbling and fingers from getting damaged!.
  • The knurled Screwdriver Bit Holder material:stainless steel.
  • 2pcs Screw Drive Guides extension material: aluminum, durable, withstanding high pressure.
  • Interface come with locking mechanism and built-in magnetic, easy to lock the screwdriver bits more tightly.
  • Used for screwdriver bits, drill, batch head and other tools for the conversion, hex shank can fit power drills chuck, 1/4" impact drivers and hand-held drivers..
Check Stock