Reviews Knockout Punch Manual Sets

Mophorn 10 Ton 1/2' to 2' Hydraulic Knockout Punch Driver Tool Kit Electrical Conduit Hole Cutter Set KO Tool Kit with 6 Dies Hole Complete Tool (Knockout Punches)

  • Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage. With a safety valve, the pressure will release automatically when the pressure reaches the limited max..
  • Durable Dies & Punches Set: The knockout punch set comes with six punching dies(1/2", 3/4", 1", 1-1/4", 1-1/2", and 2"), drilling holes from 0.86" to 2.36", fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 0.13".
  • Max thickness for stainless steel: 0.08"..
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
  • Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weight, and easy to carry. Besides, it also reduces the possibility of missing parts..
  • Wide Application: This manual metal stud punch tool can be used for professional equipment drilling, punching 11 Ga mild steel, iron plate, and also can be used for personal ....
Check Stock

Lichamp Manual Knockout Punch Kit, Heavy Duty Metal Sheet Knock Out Box Hole Cutter Conduit Punch Driver Die Set

  • Sheet Metal Knockout Punch Kit, perfect for mild steel under 10 gauge (3.5mm), such as sheet steel, copper, aluminum, brass, fiberglass, some plastics, electrical pipe, quazite, conduit (NOT FOR Stainless Steel, Wood, Drywall).
  • Heavy Duty Classic Hole Punch Kit, forged, machined and heat treated high carbon steel construction..
  • Economic Knockout Punch Driver Set, complete conduit punch set include 4 dies, 4 hole punches, 2 bearing driving bolts.
Check Stock

TEMCo TH0364 Dimple Die for 1-1/4” Actual Hole Size

  • Dimple Die for 1-1/4” Actual Hole Size.
  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • This dimple die set creates flared holes. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • Recommended Compression Tool: TEMCo Industrial TH0037 Knockout Punch Set or any other electricians knockout punch set..
Check Stock

AMZCNC 8 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set (8T（1/2"~2"）)

  • Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage..
  • Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8".
  • Max thickness for stainless steel: 1/16"..
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
  • Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weigh....
Check Stock

TEMCo TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ inch to 2 inch Electrical Conduit Hole Sizes (1/2\-2\ Conduit Size)

  • Manual drive knockout punches, for use with ratchet, wrench, or electric driver. Conduit punch sizes: 1/2.
Check Stock

TEMCo TH0397 – Manual Knockout Punch Driver Kit for ½ inch to 1-1/4” inch Electrical Conduit Hole Sizes (1/2\- 1-1/4\ Conduit Size)

  • Manual drive knockout punches, for use with ratchet, wrench, or electric driver. Conduit punch sizes: 1/2.
Check Stock

VEVOR 15 Ton Hydraulic Knockout Punch Kit, 1/2" to 4" Conduit Hole Cutter Set, KO Tool Kits W/Puncher 10 Piece, Metal Sheet Driver Tools, for Aluminum, Brass, Stainless Steel, Fiberglass and Plastic

  • Efficient Hydraulic 15T: Get the job done faster and more efficiently with our powerhouse hydraulic mechanism pump! The hydraulic mechanism pump produces 15T strong pressure, providing high punching accuracy and fast punching speed. Compared with standard wrenches, our knockout punch set is more labor-saving and efficient, ideal for completing big projects. The ram's angle can flexibly change to meet your various punching needs. It is also perfect for use in narrow places..
  • Built to Last: Made from a sturdy combination of 40 Cr steel and 45# steel, you can trust in its strength, sturdiness, and longevity. The stable construction is suitable for heavy-duty and frequent punching works. With laser-engraved alignment marks, positioning is a breeze, and precision is guaranteed. Store and transport the kit with ease thanks to its compact, lightweight design and durable carrying case. It's about time you knew where your tools were! No more missing parts!.
  • Comfort at its finest: Punch with ease and comfort using our user-friendly knockout set! The innovative slug splitting dies make slug removal a breeze, leaving....
Check Stock

ANBULL Hydraulic Knockout Punch Set Max 6T with 6 Dies Metric from 16mm to 32mm (Φ5/8\ to Φ1-1/4\), Hydraulic Metal Hole Punch W/Tool Case

  • 【Labor-Saving Hydraulic】: The maximum pressure of the ANBULL hydraulic knockout punch driver can reach 6 tons. It can easily open holes on the thickest 2.5mm iron plate and the thickest 1.5mm stainless steel plate..
  • 【Integrally Formed】: Integrally formed so the hydraulic knockout punch driver does not leak oil..
Check Stock

HORUSDY 28-Piece Heavy Duty Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch

  • Available in 28 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC, Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 16PC Chromium Vanadium Steel：punch and chisel set comes with 16-pc. chrome vanadium punch and chisel set, 5-pc. pin punches, 5-pc. taper punch, 3-pc. cold chisel, 2-pc. center punch and chisel punch gauge..
  • 12PC High Carbon Steel：6PC cold chisel set, 4PC pin punch set and 2PC center punch..
  • It is equipped with a special storage bag for easy carrying..
Check Stock

TEMCo TH0370 Dimple Die Set Tool Kit 8pcs: 1/2' 3/4' 1' 1-1/4' 1-1/2' 1-3/4' 2' 2-1/2'

  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • Eight Dimple Dies: 1/2", 3/4", 1", 1-1/4", 1-1/2", 1-3/4", 2", 2-1/2". (Actual Hole Size).
  • This dimple die set creates flared holes most commonly used on automobile parts fabrication. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • This dimple die set works with a hydraulic driver and cylinder tool most commonly used with hydraulic knockout sets like our TEMCo THA043 and TH0372..
Check Stock

SWANLAKE 28PCS Heavy Duty Punch and Chisel Set,Taper Punch, Cold Chisels, Pin Punch, Center Punch

  • 1.This 28pcs punch and chisel set contain: 16pcs punch and chisel set made of chrome vanadium,12pcs punch and chisel set made of carbon steel ..
  • 2.Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 3.Available in different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • 4.Flat chisels are tempered to resist splitting and mushrooming..
  • 5.Roll-up storage pouch makes easy storage..
Check Stock

SEDY 16-Piece Punch and Chisel Set, Including Taper Punch, Cold Chisels, Pin Punch, Center Punch

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • Product material: made of Chrome Vanadium Steel, hardness: 54~58HRC. Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1/4" x 6-3/4".
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4".
  • 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2".
Check Stock

AMZCNC Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit 1/2 to 2 inch (8T(1/2"-2"))

  • Powerful 8 US TRUE TON Punching Capacity. Compatible with GREENLEE and other domestic punch tooling 3/4"-16 threads..
  • 6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2".
  • Punching Thickness Capacity: 1/8 inch (10 ga) Steel Punching Capacity, 1/16 inch Stainless Steel..
  • Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic.
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
Check Stock