Reviews Klx 11exhaust Tip

MOTOKU Fork Oil Seal and Dust Seal Wiper Kit for Yamaha YZF-R6S YZF-R1 VMX1200 V-Max FZS1000 FZ1 for Kawasaki ZX750 Ninja ZX-7R VN1600D Vulcan for Suzuki GSX-R1000

  • For Kawasaki VN1600 Vulcan 1600 2003-2008.
  • For Kawasaki ZX750L Ninja ZX-7 1989-1992.
Check Stock

WPHMOTO Lifan 150cc 4 Stroke Oil Cooled Racing Engine Motor Carburetor Wiring Harness Kit for XR50 CRF50 XR CRF 50 70 Dirt Pit Bike Motorcycle

  • Lifan 150cc engine, 1-N-2-3-4 gear, manual clutch, 4 stroke 4 speed, single cylinder.
  • Max. Power & Corresponding Speed: 9kw(7500±375) / Max. Torque & Corresponding Speed: 11N.M(5000±250).
  • Bore x Stroke: 56.5mm x 59mm / Sprocket: 15T 428 Chain / Shaft size: 17mm.
  • Replacement / upgrade for XR50 CRF50, Kawasaki KX KLX and other most popular dirt bikes.
  • Package include: (1)Lifan 150cc Engine (1)Kick Starter Lever (1)Gear Shift Lever (1)Intake Manifold (1)Manifold hardware kit (1)Carburetor (1)Air Filter (1)CDI (1)Ignition coil (1)Wire harness (1)Clutch Cable (1)Exhaust Muffler (1)Pipe.
Check Stock

Apeixoto 2.5 Inch Inlet Exhaust Tip 2.5″x4″x12″ Exhaust Tip Polished Stainless Steel with Bolt On Design Installation

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

Big Gun Exhaust End Cap (EVO Turndown Tip) (Red)

  • This Billet exhaust tip on the market with its 15 degree angled outlet and machined gunbarrel divots at the tip..
  • This Billet exhaust tip fits on the end of your OEM exhaust system increasing your rides overall performance and sound..
  • This angle is not always present on the competitions exhaust tips as it is more time consuming to manufacture..
  • This angled outlet directs the exhaust fumes down and away from fenders and tailgates..
  • This power tip can be used either with or without the stock exhaust screen..
Check Stock

Apeixoto 2.0 2.25 2.5 Inch Adjustable Inlet Exhaust Tip 4 inch Outlet 9 Inch Long Polished Stainless Steel Exhaust Tip with Bolt On Design

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter within 2.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 9’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

Apeixoto 2.5 Inch Inlet Exhaust Tip 2.5″x4″x12″ Exhaust Tip Blue Burnt Chrome Plated Finish Stainless Steel with Bolt On Design

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel and end is bule burnt chrome plated. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny and fancy. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assist.
Check Stock

Apeixoto 2.75 Inch Inlet Exhaust Tip 2.75 Inches Inlet 3.5 Inches Outlet 12 Inches Long Polished Stainless Steel Exhaust Tailpipe Tip Bolt On Design

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.75 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.75’’ x 3.5’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 3 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a cut edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

Melling MRM-1716 Rocker Arm Ball

  • Specs: Countershaft Washer, Sprocket Retainer Kit 10 pk Washers or Snap-Rings.
  • Meets or Exceeds OEM Specs for Fit and Performance.
  • Compatible With/Replacement For: Kawasaki KFX250 Mojave 1987 - 2004, KFX450R 2008 - 2014, KL650 A KLR 1997 - 2007, KL650 E KLR 2008 - 2014, KLX250S 2006 - 2014, KLX250SF 2009 - 2010, KLX300R 2003 - 2007, KLX450R AU 2018 - 2019, KLX450R 2008 - 2009, KLX650R 1993 - 1996, KX450F 2006 - 2019.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement.
  • 100% New aftermarket Countershaft Washer built to meet OEM specifications.
  • Compatible with vehicle type: all-terrain-vehicles.
Check Stock

Dual Exhaust Tips Muffler Tip Chrome Exhaust Tip Heart Shaped Car Muffler Double Tube Universal Stainless Steel Car Exhaust Muffler,For Fitment On Most Cars Sedans Suitable For 48mm-60mm Exhaust Tip

  • ☻[High-quality material] We use the best 304 stainless steel to make the heart-shaped double-tube Exhaust tip,and the exterior adopts a sleek....
  • ☻[Production process] Exhaust nozzle surface polishing+color electroplating process design treatment, the inner cylinder of the exhaust nozzle is....
  • ☻[Easy to install/no need to drill] When installing the tip of the exhaust pipe,clean the surface of the old tip of the vehicle,and then only use a....
  • ☻[Product function and design] Exhaust tip is designed with two branches,one in and two out,used for Car exhaust tip,which can reduce the tail of....
  • ☻[Perfect compatibility]The exhaust nozzle is suitable for exhaust nozzles with a diameter less than 48mm-60mm.Our exhaust nozzles are perfectly....
Check Stock

Tail Throat,Yctze Universal Exhaust Tip Tail Throat Glossy Carbon Fiber Red Pipe Straight 3.1in Inlet 4in Single Outlet Exhaust Tip for Cars

  • FEATURES: 6.4in total length, 3.1in inlet size and 4in outlet size, applicable to 2.9‑3.1in exhaust pipe.Please confirm whether this product is suitable for the exhaust pipe diameter of your vehicle before purchasing. exhaust tip for cars.
  • STAINLESS STEEL MATERIAL:Adopt superior stainless steel,corrosion-resistant, durable, not easy to be damaged during use, reliable in use, and long in service life. carbon exhaust tip.
  • CARBON FIBER LOOK:This Tail Throat adopts high quality carbon fiber, dirt-resistant, anti-corrosion and durable. adding luxury and elegant sense to it, not easy to fade.red inside, stylish and distinctive, upgrade the car appearance. red exhaust tip.
  • EXCELLENT PEFORMANCE:Enhance the power, providing smoother exhaust, improve driving comfort and experience. exhaust tip.
  • INSTALLATION METHOD: Easy to install, no complicated tools are needed, and the old one can be replaced directly, saving you time and energy. carbon fiber exhaust tip.
Check Stock

Prox Racing Parts 28.3402-1 Steel Replacement Exhaust Valve

  • Fits: Suzuki DR-Z 400 2000-2012, LT-Z 400 2003-2012.
  • Kawasaki KLX 400 R 2003, KFX 400 2003-2006.
  • ProX steel valves are manufactured of premium grade steel to exact OEM specifications and tolerances.
  • Manufactured by the leading OEM factories in Japan and are a direct and cost-efficient OEM replacement.
  • ProX steel valves can be used in combination with all the OEM valve train components like valve springs, guides, bases and retainers.
Check Stock

Trkimal 28mm Exhaust Muffler for CRF50 XR50 KLX SSR Thumpstar TTR YCF Lifan Apollo dbx18 50cc 70cc 90cc 110cc 125cc Chinese Pit Dirt Bike Parts (Green)

  • 【Fits】Green Aluminum 28mm Exhaust Muffler For CRF50 XR50 KLX SSR Thumpstar Lifan 50cc 70cc 90cc 110cc 125cc Chinese Pit Trail Dirt Bike Motorcycle.
  • 【Specification】 Mounting Hole Distance: 28mm / 1.1 inches, Length : 250 mm, width : 85.5 mm.
  • 【Package Contents:】1 x Exhaust Muffler, 1 x metal clip, 1 x Black rubber gasket, 2 x gasket, 1 x Screw kit..
  • 【Note】Please check carefully the item pictures, model and size before purchasing. Or leave us messages for assistance if you are not sure about the fitment..
Check Stock

Carbon Fiber Exhaust Tip 3 Inch Inlet 4 Inch Outlet Burnt Blue 3 Inch Exhaust Tips Muffler Tip

  • 【Purchase Guide】 Remove the exhaust tip from the original car and make sure the outer diameter of the exhaust pipe is 3 inch(77mm)..
  • 【Universal fitment】The muffler exhaust end tip fits for most vehicles with a pipe diameter of 3.0 inch..
  • 【High quality steel】 The 3 inch exhaust tip is designed with durable SUS304 stainless steel . Protect your original pipe from sun and rain. Avoid rusting and deformation..
  • 【3K Carbon Fiber】 The shell of the 3 inlet carbon fiber exhaust tip is made with carbon fiber material, smooth and shiny, and resistant to high temperatures.Also can decorate the car, increase the beauty of the car, enhance the driving experience..
  • 【Easy installation】 No welding and drilling required. just put the carbon fiber tail pipe on the car exhaust pipe and tighten the fixing device..
Check Stock