Reviews Keyed Shaft Coupler

Master Lock - (4) Keyed Alike Trailer & Multi Purpose Padlocks, 37KA-4

  • ATTENTION: If you order two 4-packs they will NOT necessarily be keyed the same. To ensure you get two 4-packs keyed alike, you must order the 8-pack..
  • APPLICATION: Ideal for outdoor applications when needing many locks that utilize ONLY one key. The 37 lock works on 1-7/8 & 2 inch couplers & on virtually all standard hasp applications. These locks have a removable shackle sleeve. Sleeve off - Secures coupler latches. Sleeve on - Works best with hasps. TO FIT COUPLER LATCH: Remove the shackle sleeve. Shackle fits standard opening of 9/32" (7mm). Note that non-rigid shackle has enough play to fit virtually all coupler latches less than 7/8 wide..
  • IMPORTANT NOTE: If using this style lock on a trailers coupler latch please be aware it is NOT recommended for all 2-5/16 couplers. It will fit some 2-5/16 couplers, the exception being 2-5/16 couplers that have the latch partially recessed from the top surface of the coupler, or latches that are wider than 7/8..
  • SPECIFICATIONS: 3/4" (19mm) Armored Shackle Guard helps block bolt cutters. Revolving, case-hardened steel shackle sleeve resists cutting and sawing..
Check Stock

Master Lock - (3) Keyed Alike Trailer & Multi Purpose Padlocks, 37KA-3

  • ... and six keys. The lock is also available with Bump Stop Technology. Search 37NKA in our storefront..
  • APPLICATION: These padlocks are ideal for all outdoor applications when needing multiple locks that utilize ONLY one key. The #37 latch lock works well on 1-7/8 and 2 inch couplers and on virtually all standard hasp applications. These locks have a removable shackle sleeve. Sleeve off - Secures coupler latches. Sleeve on - Works best with hasps. KEY RETAINING - ensures that padlock is not left unlocked..
  • PADLOCK FEATURES: 1-9/16"(21mm) wide x 3"(76mm) high. Armored Shackle Guard blocks bolt cutters. Revolving, case-hardened steel shackle sleeve resists cutting and sawing. Removable shackle sleeve. Sleeve off - Secures coupler latches to accommodate openings 9/32" (7mm) in diameter. Sleeve on - Works best with hasps, fits openings 1/2" (13mm) in diameter or larger. Precision pin tumbler mechanism resists picking..
  • IMPORTANT NOTE: If using this style lock on a trailers coupler latch please be aware it is NOT recommended for all 2-5/16 couplers. It will fit some 2-5/16 couplers, the exception being 2-5/16 c....
Check Stock

Master Lock - 5 Trailer Locks Keyed Alike #5KA-37940-37

  • Total Trailer Security Keyed Alike - One key opens all five locks. Each lock comes with two keys, for a total of ten keys..
  • Multiple 5KA trailer lock packages CAN be keyed alike. If you ordered a quanity of 2, 3 etc we would automatically key them all the same..
  • Round padlocks 2-3/4" (70mm) wide laminated stainless steel body resists corrosion..
  • Latch lock doesn't fit some 2-5/16" couplers. See description below for latch lock (model 37KABLK) applications. For 2-5/16 couplers the better lock set is: Master Lock - 5 Trailer Locks Keyed Alike 5KA-37940-3.
  • Coupler lock fits 1-7/8", 2" & 2-5/16" couplers. See the description below for the majority of coupler manufacturers this lock will fit..
Check Stock

Master Lock - 6 Trailer Locks Keyed Alike #6KA-3796230-37

  • Total trailer security Keyed Alike - One key opens all six locks. Each lock comes with two keys, for a total of twelve keys..
  • Multiple 6KA trailer lock packages CAN be keyed alike. If you ordered a quanity of 2, 3 etc we would automatically key them all the same. See RECEIVER LOCK options in the description below..
  • Latch lock doesn't fit some 2-5/16" couplers. See description below for latch lock (#37) applications. For 2-5/16 couplers the better lock set is: Master Lock - 6 Trailer Locks Keyed Alike #6KA-3796230-3..
  • Three (3) high security 6230KA padlocks featuring a 5-pin cylinder and boron alloy hardened shackle. Please see images for padlock dimensions..
  • Coupler lock fits 1-7/8", 2", & 2-5/16" couplers. See the description below for the majority of coupler manufacturers this lock will fit..
Check Stock

Master Lock - 3 Keyed Alike Universal Trailer Coupler Locks 379KA-3

  • In Stock with a delivery time of 1 to 5 days. This is a set of 3 Keyed Alike trailer coupler/tongue locks and is ideal when needing multiple locks....
  • These locks protects unattended trailers and guards against tow-away theft. The universal trailer coupler lock fits 1-7/8in (48mm), 2in (51mm) and....
  • This simple design is difficult to defeat because when it's locked on the trailer the lock rests on top of the coupler (see image) thus thwarting....
  • Rekeyable cylinder for keyed alike convenience with an advanced locking mechanism that resists picking and prying. Each lock weighs 2.4 lbs. and is....
  • Made with Reinforced Zinc Die-Cast resists rust and corrosion. Few materials provide the strength and toughness of zinc alloys. Impact resistance is....
Check Stock

Master Lock 3895DAT - Coupler Lock, Receiver Lock and Latch Lock - 3 Components Keyed Alike

  • For more DETAILED information, please click "See More Product Details"..
  • Complete trailer security system KEYED ALIKE..
  • (1) coupler lock, (1) receiver lock & (1) latch lock all keyed alike.
  • This lock set can NOT be keyed alike with other locks nor can 2 of these lock sets be keyed alike..
  • The Limited Lifetime Warranty provides peace of mind from a brand you can trust..
Check Stock

RC Drive Shaft, 4Pcs CVD Front Rear Drive Shaft Metal Transmission Axle Compatible with Traxxas Slash 4X4 1/10 RC Car(Titanium)

  • 【Parameters】- Connect to motor shaft: 3.18mm/0.12".
  • 【High Quality Material】- Stainless steel, rc boat motor coupler is the high quality replacement part..
  • 【Feature】- This stainless steel flex coupler(with grub screw) is for round end cable,fit for 3.18mm/0.12" motor shaft and 4mm/0.16" flex shaft..
  • 【Application】- The flex shaft collet is compatible with DIY RC model, such as RC boat toy, RC submarine and so on..
Check Stock

Master Lock - (3 Keyed Alike Universal Trailer Coupler Locks 379KA-3

  • In Stock with a delivery time of 1 to 5 days. This is a set of 3 Keyed Alike trailer coupler/tongue locks and is ideal when needing multiple locks that utilize ONLY one key. The same key opens all three locks. Each lock comes with two keys, therefore you will receive a total of six keys with the purchase of this 3 pack. Limited Lifetime warranty..
  • These locks protects unattended trailers and guards against tow-away theft. The universal trailer coupler lock fits 1-7/8in (48mm), 2in (51mm) and most 2-5/16in (59mm) couplers by Reese, Fulton, Valley, Atwood, Shelby, Putnam, Hammerblow, Dutton, Lainson, and UFP..
  • This simple design is difficult to defeat because when it's locked on the trailer the lock rests on top of the coupler (see image) thus thwarting blunt force from downward hammer strikes. It also rotates (less rigidity) making it harder to break with sledge hammer force..
  • Rekeyable cylinder for keyed alike convenience with an advanced locking mechanism that resists picking and prying. Each lock weighs 2.4 lbs. and is simple to install and remove..
  • Made with Reinforced Zinc Die-Cast resists rust and corrosion. Few materials provide the strength and toughness of zinc alloys. Impact resistance is significantly higher than cast aluminium alloys, plastics....
Check Stock

Master Lock - 6 Trailer Locks Keyed Alike 6KA-37937-37

  • In Stock with a delivery time of 1 to 5 business days. Total trailer security Keyed Alike - One key opens all six locks..
  • Multiple 6KA trailer lock packages CAN be keyed alike. If you ordered a quanity of 2, 3 etc we would automatically key them all the same..
  • Latch lock doesn't fit some 2-5/16" couplers. See description below for latch lock (#37) applications. For 2-5/16 couplers the better lock set is: Master Lock - 6 Trailer Locks Keyed Alike 6KA-37937-3.
  • Each lock comes with two keys, for a total of twelve keys..
  • Coupler lock fits 1-7/8", 2" & 2-5/16" couplers..
Check Stock

UniTry 2Pcs Microwave Turntable Coupler, Microwave Oven Roller Guide Support (Shaft Length: 0.94"/ 24mm)

  • ✅ Reminder: There are two different sizes of the shaft length (17mm, 24mm). In order to buy the correct coupler, you need to measure the shaft length of your old coupler. If you select a wrong size, the turntable plate may be unable to turn or not in balance on the support..
  • ✅ Shaft Dimensions: Length 0.94″/ 24mm, Outer Diameter 0.43″/ 11mm..
  • ✅ Material: Made of high quality plastic for long life usage, an ideal replacement for the old or broken one..
  • ✅ Compatibilty: Universal replacement part for microwaves (the old part should have the same size).
  • ✅ Package Contents: 2 x Microwave Turntable Coupler (Shaft Length: 0.94″/ 24mm).
Check Stock

Magic&shell 2-Pack D19xL25 Shaft Coupler Aluminium 3D Printer Parts Accessory CNC Stepper Motor Encoders Engraving Machine Z Axis Flexible Shaft Coupling 10-10mm

  • Type: 2pcs 3D Printer Shaft Coupler, Coupler Diameter(D): 19mm, Coupler Height(L): 25mm, Top Shaft Diameter: 10mm, Bottom Shaft Diameter: 10mm,....
  • Material: Made of high quality aluminum alloy, integrated molding, oil, rust and corrosion resistance..
  • Function: Flexible metal coupler helps for compensating radial, angular and axial deviations. With the function of buffering, damping and improving....
  • Feature: Zero clearance transfer motion, exactly the same clockwise and counterclockwise rotary characteristics..
  • Use: Often used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..
Check Stock

Magic&shell 2-Pack D19xL25 Shaft Coupler Aluminium 3D Printer Parts Accessory CNC Stepper Motor Encoders Engraving Machine Z Axis Flexible Shaft Coupling 6-8mm

  • Type: 2pcs 3D Printer Shaft Coupler, Coupler Diameter(D): 19mm, Coupler Height(L): 25mm, Top Shaft Diameter: 6mm, Bottom Shaft Diameter: 8mm, Mounting....
  • Material: Made of high quality aluminum alloy, integrated molding, oil, rust and corrosion resistance..
  • Function: Flexible metal coupler helps for compensating radial, angular and axial deviations. With the function of buffering, damping and improving....
  • Feature: Zero clearance transfer motion, exactly the same clockwise and counterclockwise rotary characteristics..
  • Use: Often used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..
Check Stock

RC Drive Shaft for 1/10 Traxxas Slash 4X4 2WD Rustler VXL Stampede Rustler Hoss,ARRCat RC Upgrades Parts,4Pcs Front and Rear Transmission Universal Drive Shaft CVD Heavy Duty (Red)

  • 【Parameters】- Connect to motor shaft: 5mm/0.2".
  • 【High Quality Material】- Stainless steel, rc boat motor coupler is the high quality replacement part..
  • 【Feature】- This stainless steel flex coupler(with grub screw) is for round end cable,fit for 5mm/0.2" motor shaft and 4mm/0.16" flex shaft..
  • 【Application】- The flex shaft collet is compatible with DIY RC model, such as RC boat toy, RC submarine and so on..
Check Stock