1 to 1-1/8 inch 1/4 Key Gas Engine Pulley Crank Shaft Sleeve Adapter Predator
- This steel shaft sleeve adapts a crankshaft from 1” to 1-1/8” diameter. It comes with 1/4“ stepkey..
- Works with Gas Engine Crank Shafts to enlarge the crank diameter to fit pulleys, gear boxes etc..
- Part’s specification:Sleeve inside diameter 1”,Sleeve outside diameter 1-1/8”.
- Sleeve length is about 3”,Sleeve Keyway slot 1/4”,Step Key Length is about 2”.
- The sleeve and step key are designed to slip fit on your 1” diameter crankshaft with 1/4” keyway and enlarge it to 1-1/8 diameter with 1/4”....
Check StockMaster Lock - (3) Keyed Alike Trailer & Multi Purpose Padlocks, 37KA-3
- APPLICATION: These padlocks are ideal for all outdoor applications when needing multiple locks that utilize ONLY one key. The #37 latch lock works well on 1-7/8 and 2 inch couplers and on virtually all standard hasp applications. These locks have a removable shackle sleeve. Sleeve off - Secures coupler latches. Sleeve on - Works best with hasps. KEY RETAINING - ensures that padlock is not left unlocked..
- PADLOCK FEATURES: 1-9/16"(21mm) wide x 3"(76mm) high. Armored Shackle Guard blocks bolt cutters. Revolving, case-hardened steel shackle sleeve resists cutting and sawing. Removable shackle sleeve. Sleeve off - Secures coupler latches to accommodate openings 9/32" (7mm) in diameter. Sleeve on - Works best with hasps, fits openings 1/2" (13mm) in diameter or larger. Precision pin tumbler mechanism resists picking..
- IMPORTANT NOTE: If using this style lock on a trailers coupler latch please be aware it is NOT recommended for all 2-5/16 couplers. It will fit some 2-5/16 couplers, the exception being 2-5/16 couplers that have the latch partially recessed from the top surface of the coupler, or latches ....
Check StockOh L'amour - Thomas Tank Engine Sleeve
- Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
- Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
- The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
- Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
- Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..
Check StockCTRINEWS for BMW Key Fob Cover with Leather Keychain, Advanced Blade Shape Soft TPU Surface Leather Grain Key Fob Holder for New BMW Smart Key(Silver)
- 【Fits Model】: Confirm the appearance and shape of BMW car keys, key fob cover for BMW 2 5 6 7 Series X1 X2 X3 X5 X8 etc (For appearance information, please refer to the link picture introduction).
- 【Material】: The key fob case is made of premium soft TPU upmarket custom and impressed design Excellent feel and stylish appearance.
- 【Anti-Fingerprint】: Coated with hydrophobic and oleophobic clear layers, the key sleeve is protects against sweat and oil residue from fingerprints, keeping your key sleeve is pristine all day long.preventsunwanted particles from nesting on the surface of your protector.
- 【Full Protection】: Protect your BMW key from impact and scratches. Make your car key fob stay nice and safe.
- 【Note】: Even if the type of the car is the same, the car key fob might be different based on the different year of manufacturing, Please DOUBLE CHECK Your Key Shape before place the order.
Check Stock2023 PU Leather Creative Pull Out Cute Large Capacity Car Key Case,Car Keychain (D6pcs)
- [Cute Creative Key Sleeve] — New Creative Cartoon Leather Pull-Out Key Sleeve. Exquisite and compact, easy to carryIt’s easy to use, and you’re no longer afraid to scratch your mobile phone..
- [PU Leather Creative Pull Out Cute Large Capacity Car Key Case] — PU leather High quality materials, non-toxic and odorless, safe and not easily damaged..
- [Cute Design Car Keychain] — Our key sleeves are available in 4 styles, Pure colour, Bunny, Fish and Cat. Colours including black yellow red pink..
- [Large Capacity] — It can hold 5-8 keys.They are not only suitable for your daily use, but also nice for sharing with your friends, family, and can also be given as a housewarming gift..
- [Not Easy to Slip] — These PU leather key identifiers covers fit easily over your keys, are secure and don’t fall off easily. They still fit easily into a key ring for easy portability..
Check StockMaps of Fate: (Threads West, An American Saga Book 2)
- Key West t shirt, Key West print shirt, Florida shirt, Key West vintage tee, fun Key West souvenir top, Key West map t shirt..
- This fun tee shirt would make a great gift for men and women who love Key West. Cool tshirt present with a map print for friends and family. Great shirt to wear to the gym!.
- Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stockpalart 1 Set 3/4" to 1" inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter for Predator
- Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
- Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
- The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
- Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
- Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..
Check StockGas Engine Pulley Adapter Kit, 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key
- Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
- Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
- The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
- Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
- Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..
Check StockLicBund 5/8" to 3/4 Inch w/Step Key Gas Engine Pulley Crank Shaft Sleeve Adapter Pulley Bore Reducer Bushing Sheave & Key Predator
- Material: stainless steel 304. The crankshaft is made of stainless steel, which is more durable than ordinary iron products. Never rust, better protect the crank..
- Bushing inner diameter 5/8", outer diameter 3/4", sleeve length about 3", keyway 3/16', stepped key length about 3".
- The sleeve key and stepped key are designed to fit perfectly into the 3/16-inch keyway and fit on a 5/8-inch diameter crankshaft, and enlarged to 3/4-diameter through a 3/16-inch key seat.
- Replace motors with shafts of different diameters, and replace pulleys with different speeds or belts..
- Used in conjunction with gas engine crankshafts to enlarge the crank diameter to fit pulleys, gearboxes, etc..
Check StockHide & Drink, Leather Key Sleeve, Key Ring Holder, Vintage Cover, Stylish Accessories, Handmade Includes 101 Year Warranty (Dark Jade)
- FUNCTIONAL & FASHIONABLE: The Leather Key Sleeve is both stylish and useful. Made from our signature Full-Grain Leather, this Leather Key Sleeve was built to last. Keep your keys on one end, and slide whichever key you want to keep separate into the other. This is a great way to easily identify your house key, while still keeping all of your keys together on one single key holder. Ditch the confusion and go for organization instead with this Leather Key Sleeve..
- HIDE & DRINK’S 101 YEAR WARRANTY: Each one of Hide & Drink’s rustic, durable leather products is made with care and craftsmanship, with every item handmade to the highest standard. Our confidence in our products knows no bounds, so we include each product that you purchase with a 101 Year Warranty. We aim for nothing but 100% satisfaction when it comes to our products, so if you’re not satisfied, just get in touch with us and we’ll help you as quickly as possible..
- HANDMADE FROM SOFT & ATTRACTIVE FULL GRAIN LEATHER: All of Hide & Drink’s products are hand cut and handcrafted using the highest quality of leather that you will find, namely Full Grain Leather. The quality of this leather ensures a long-lasting life and durability. After time and use, the leather will attain a beautiful a....
Check StockMaster Lock - (4) Keyed Alike Trailer & Multi Purpose Padlocks, 37KA-4
- ...ily be keyed the same. To ensure you get two 4-packs keyed alike, you must order the 8-pack..
- APPLICATION: Ideal for outdoor applications when needing many locks that utilize ONLY one key. The 37 lock works on 1-7/8 & 2 inch couplers & on virtually all standard hasp applications. These locks have a removable shackle sleeve. Sleeve off - Secures coupler latches. Sleeve on - Works best with hasps. TO FIT COUPLER LATCH: Remove the shackle sleeve. Shackle fits standard opening of 9/32" (7mm). Note that non-rigid shackle has enough play to fit virtually all coupler latches less than 7/8 wide..
- IMPORTANT NOTE: If using this style lock on a trailers coupler latch please be aware it is NOT recommended for all 2-5/16 couplers. It will fit some 2-5/16 couplers, the exception being 2-5/16 couplers that have the latch partially recessed from the top surface of the coupler, or latches that are wider than 7/8..
- SPECIFICATIONS: 3/4" (19mm) Armored Shackle Guard helps block bolt cutters. Revolving, case-hardened steel shackle sleeve resists cutting and sawing..
Check StockCrank Shaft Sleeve Adapter, 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key Steel Silver 7/8 to 1 inch shaft adapter with clutch 7/8 centrifugal clutch crankshaft sleeve 7/8
- COLD-ROLLED STEEL: The crank sleeve joint is made of industrial-grade cold-rolled steel, CNC precision processed and rolled, which has greater strength, toughness and durability, strong wear resistance, not easy to rust and deform, reliable quality, and can be used stably for a long time. for 7/8 to 1 shaft adapter 7/8 to 1 inch shaft adapter with clutch.
- STRONG COMPATIBILITY: Crankshaft sleeve adapters are equipped with different sizes of adapters, which have a wide range of applications and can meet your various needs. Please confirm whether the product is Replacement before placing an order. for 7/7" to 25mm shaft adapter 7/8 centrifugal clutch.
- PROFESSIONAL USE: The crankshaft sleeve adapter allows you to use the old clutch or pulley on the new engine, you may need to use a small hammer to gently tap it into place to make it Replacement tightly for 7/8 blade pulley crankshaft sleeve 7/8 to 1 in.
- EASY TO INSTALL: Contains an adapter and keyway, the wider part of the key is located in the adapter. The installation is very simple and can be completed in a few minutes. It is your ideal accessory. for 7/8 to 1 inch....
Check Stockgas engine crankshaft 3/4 to 1 inch sleeve + Crank Sleeve Adapter | 7/8" to 1" inch Gas Engine Pulley Crank Shaft Sleeve Adapter with Step Key
- ★★★ 100% brand new: 100% brand new 7/8 inch to 1 inch crank sleeve adapter with step keys. . Manufactured according to strict quality control standards, improved design to improve durability - 7/8 to 1 inch shaft adapter with clutch.
- Note: For detailed product parameters, refer to the instructions. Please confirm whether the product is suitable for your equipment before ordering, I wish you a happy life - 7/8 centrifugal clutch.
- ★★★ High-quality materials: Crank sleeve adapter is made of cold-rolled steel, CNC precision machining and rolling, high durability. - crankshaft sleeve 7/8 to 1 in.
- ★★★ Applicable: It is used to convert the crankshaft from 7/8 inch to 1 inch shaft. The adapter is about 3 inches long and includes the stepping keys needed from 1/4 inch key mode to 3/16 key mode. - 7/8 to 1 crankshaft adapter.
- ★★★ Tips: You can use the old clutch or pulley on the new engine. You may need to use a small hammer to gently hit it to make it fit snugly. Includes an adapter and keyway, the wider part of the key is located in the adapter..
Check Stock