Reviews Keg Coupler

Keg Coupler, D Type Keg Coupler, Keg Taps For Kegerator, Sankey D Tap With Stainless Steel Probe, Keg Coupler D System With Black Handle & Hose Clamp (D Style)

  • ★ Stainless Steel Probe ★ The D system keg coupler’s probe is made of stainless steel that will not wear away over time and your beer will no flavor at all . Keg coupler’s body is made from chrome-plated brass.
  • ★ Tap For American Kegs Or Sankey Keg ★ The keg coupler is D – System keg taps. It fits perfectly into american kegs/sankey keg. Great sankey d coupler to replace old tap that was leaking and hard to get on.
  • ★ Come With Two Tailpiece Set & Hose Clamp ★ The sankey keg coupler is G5/8 thread( U.S. Beer Industry Standard). This d coupler has a 3/8″ OD gas/beer tailpiece to fit 5/16″ ID hose.
  • ★ Easy To Use And Lock ★You also need a gas tank/regulator/beer faucet/hose to get the gas from the regulator to the coupler and dispense your beer. And then tap the sankey coupler to keg, pull the handle out and then down to lock.
  • ★ With A Pressure Relief Valve ★ The pressure relief valve of keg tap coupler will automatically open on about 53 psi.
Check Stock

Keg Coupler, MRbrew Beer Coupler, Keg Coupler D System, Sankey Keg Coupler, All 304 Stainless Steel Keg Tap Coupler, For American Standard 5/16'' I.D Size Liquid & Gas Hose

  • STAINLESS STEEL PROBE: The keg coupler d system probe, which is the part that actually presses down into the keg to allow beer to pass through the coupler, is made of high quality 304 food grade stainless steel. It is resistant to chemicals, making it more sanitary than chrome plated brass..
  • STAINLESS STEEL BODY: This premium sankey keg coupler body also constructed of durable 304 grade stainless steel so it can stand up to the toughest conditions of a commercial bar. Without any plating, it will never rust and produce harmful substances. making it more safer and more durable than chrome plated brass..
  • STAINLESS STEEL SAFETY RELIEF: This beer coupler features a 55-PSI pressure relief valve allowing you to easily let the pressure out of the keg. With a food grade silicone O-ring to avoid relief valve leakage. The d coupler meeting all kinds of pressure that needs you, this is definitely the best gift for lovers of home brewing..
  • STAINLESS STEEL ERGONOMIC HANDLE: The MRbrew keg coupler has an easy to use ergonomic handle. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. Anyone who has pulled the handle off of a keg coupler can appreciate the convenience!.
  • 100% LIFELONG IUUSES SOLVING FOR YOU: Eac....
Check Stock

Kegco Beer Keg Coupler D System Tap Lever Handle

  • Kegco keg coupler features a commercial-grade construction that stands up to heavy use in demanding commercial environments like pubs, bars, and restaurants.
  • Specially designed with a lever handle that makes it more sturdy and reliable than standard wing handle style keg couplers.
  • NSF approved keg coupler features a durable nickel-plated forged brass body with a sanitary stainless steel probe.
  • This keg tap is compatible with all American “D” system sankey kegs and will be able to tap domestic brand beer kegs.
  • Keg coupler design includes a 55-psi pressure relief valve that allows over-pressurized gas to escape before it enters the keg.
Check Stock

Non-Slip Rubber Padded Stainless Steel Drip Tray with Tower Cutout by Proper Pour

  • Kegco keg coupler features a commercial-grade construction that stands up to heavy use in demanding commercial environments like pubs, bars, and....
  • Specially designed with a lever handle that makes it more sturdy and reliable than standard wing handle style keg couplers.
  • NSF approved keg coupler features a durable nickel-plated forged brass body with a sanitary stainless steel probe.
  • This keg tap is compatible with all American "D" system sankey kegs and will be able to tap domestic brand beer kegs.
  • Keg coupler design includes a 55-psi pressure relief valve that allows over-pressurized gas to escape before it enters the keg.
Check Stock

Tapcooler Beer Valve Connector for Direct Keg Connection

  • DURABLE MATERIAL : 304 stainless steel construction makes the keg coupler more durable and sanitary. stainless will keep the best taste of your beverage, the healthy drinking is "on-the-go" !!.
  • NO LEAKS: Thoughtful 5/16" gas in barb & 3/16"' liquid out barb setting, allows air and beer line connection end closely to attach to coupler, Also comes with hose clamps and extra connection sealing tape to tighten hose and seal the barb further avoiding any possibility of leaking. Features fully integrated 55-PSI pressure relief valve as well as a ball check valve which prevents back flow of beer and can be easily removed for cleaning..
  • EFFORTLESS INSTALLATION: This coupler is easy to operate, you just need to simply push down and turn to properly couple the keg. Compared to handle-type low profile coupler, this low profile coupler avoids the space of operation handle and is designed with a 90° hose barb allowing one hand control in tight dispensing locations, allows more consistent pours & less foaming of your beverage dispensing..
  • SPACE SAVING: Low profile D system coupler features a space saving....
Check Stock

Nostalgia Electrics KRS2100RETRORED Kegorator Beer Keg Fridge, Red

  • Holds one full size 1/2 barrel keg, one 1/4 barrel pony size keg or two 5-gallon D system kegs.
  • Keg coupler fits D system valves and does not fit non-standard keg sizes.
  • Adjustable thermostat with interior temperature range of unit is 30-40-Degree F.
  • Includes empty 2.5-pound CO2 bottle, double meter regulator and drip tray.
  • Product Built to North American Electrical Standards.
Check Stock

Stainless Steel keg Coupler Ball Lock Posts Adapter,Sankey keg to Ball Lock Quick Disconnect post,Fits to D Type Keg Coupler FPT 5/8 Thread Stainless Steel Gas & Liquid Post for Homebew

  • 【Food Grade Material】Made of food grade 304 stainless steel instead of chrome plated , which let our keg coupler adapter kit more healthier/ environmental/anti-corrosion/no rust/durable. 2pcs Silicone gaskets are for free..
  • 【Two Way to Identify Gas &Liquid Post】 The Gas Post has a subtle etched line around the top of the base (the liquid post has no etched line).The flaring of the metal on the liquid side is much wider than the gas side.
  • 【Quick & Easy To Convert】This Keg Coupler Adapter can combined with ball lock quick disconnect set that will convert the sanke style keg into a Cornelius style Ball Lock keg( easy to toggle between commercial and homebrew beers).
  • 【Hand Or Plier To Install】Can install our ball lock keg conversion kit in 5/8 thread S-style &D-style keg coupler to use.You can use hand or the plier to lock each side grooves,then tighten the posts. Don’t over tighten to avoid deforming the washer.
  • 【Easy To Clean 】To clean this keg coupler adapter kit , you can infuse the clear water into your beer keg to operate one time just like exporting beer.Don’t suggest you take apart this conversion kit,cuz it is very difficult to reinstallation.
Check Stock

Kegco Keg Tap Coupler, 1

  • The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
  • This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
  • Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
  • This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
  • Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.
Check Stock

Kegco KTS97D-W D System Ergonomic Keg Coupler with Lever Handle and Stainless Steel Probe

  • This Kegco keg coupler is compatible with all American D System Sankey kegs, allowing you to easily enjoy your favorite domestic beer brands straight from the keg.
  • Clickable lever handle clicks up and down to engage the keg, making it more convenient than conventional lever style keg couplers that need to be pulled out before being pushed down.
  • The keg probe is made of high-quality stainless steel that is resistant to chemicals, making it more sanitary than chrome plated brass keg couplers.
  • Kegco’s commercial-grade keg tap is constructed of durable 304 grade stainless steel that can stand up to use in demanding commercial environments like pubs, bars, and restaurants.
  • The keg coupler body features a 55-psi pressure release valve that allows you to easily let the pressure out of the keg.
Check Stock

Kegco KMKCAL Keg Coupler Adapter, Liquid

  • This Kegco keg coupler adapter makes it easier than ever to dispense both store bought beer and your own home brew using the same dispense system.
  • Adapter fits onto the liquid-out side of all industry standard keg couplers and allows you to connect a liquid ball lock coupler to the post.
  • No more messing with tubing connections on a standard Sanke conversion kit or continuously tapping and untapping the Sanke keg.
  • Now you can seamlessly switch between your ball lock corny keg and a comercial Sanke keg in seconds!.
  • These Sankey to ball lock disconnects are the best solution for dispensing several beers that you have on tap at once.
Check Stock

Kegco Sankey to Ball Lock Coupler Adapter Set

  • Kegco Sankey coupler adapter kit includes both a gas and a liquid post.
  • These posts replace the barb fittings on your Sanke coupler to match the posts on a typical Cornelius ball lock style keg.
  • Allows you to seamlessly switch between your ball lock corny keg and a commercial Sanke keg in seconds.
  • No more messing with tubing connections or continuously tapping and untapping the same sanke keg when switching back and forth.
  • Now there’s a quick and easy solution that allows you to dispense any beer you have on tap!.
Check Stock

FERRODAY 8 Keg Pump D-System Keg Pump Complete US Beer Keg Pump for Sankey Keg Party Pump Heavy Duty Picnic Keg Tap Keg Hand Pump Draft Beer Kegerator Pump Easy Lock Water Keg Pump Soda Pump

  • 【Built to Last Pump & Faucet】: American complete pump tap system 8” D system coupler for Sankey keg. High-quality material, classic modeling,....
  • 【No Leaks From Connections】: Lever handle lock coupler with internal gasket provides air tight seal and no leaks.
  • 【Easy to Tap & Easy to Pump】: Highly reliable 8” cylinder picnic party pump with ergonomic ball end. It's easy to operate with a simple stroke....
  • 【Widely Used D System Keg Pump】: 8" American keg party pump D system coupler for Sankey kegs. Works with most North American beer kegs. Perfect....
  • 【Easy to Setup & Life Time Service】: Connects the pump directly to your keg, lock down the lever handle, squeeze the faucet trigger and enjoy your....
Check Stock

Kegco MPK199B-G Guinness Dispensing Kegerator with Black Cabinet and Door

  • ...MPLETE GUINNESS KEG TAPPING KIT: This Kegerator is equipped with a complete direct draw kit for U system domestic kegs, which includes brands like Harp and Kilkenny in addition to Guinness. The kit includes a brand new 15 cu. ft. aluminum Nitrogen tank, a double gauge Nitrogen regulator, a U system lever handle keg coupler, and a 3" diameter polished stainless steel draft tower with a chrome plated stout beer faucet..
  • CHROME PLATED STOUT BEER FAUCET: To allow you to properly pour a glass of Guinness with that famous and unique head, we've included a specialty European Stout Beer Faucet with the dispense kit. This faucet operates by pulling forward and down on the tap handle. A restricted spout with a tiny restrictor disc helps slow down the pour and allows the beer to pour properly, and the disc can be removed if you need to pour a regular beer from the faucet..
  • "U" SYSTEM LEVER HANDLE KEG COUPLER: This kit comes with a commercial grade lever handle keg coupler that is compatible with all U system kegs, including Guinness, Harp, and Kilkenny kegs. It features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is squeeze the handles together and then push down on the lever handle to properly couple the ....
Check Stock