Reviews Kayak Trolling Motors

Codinter Kayak Motor Mount, Trolling Motor Mount Kit for Sit-On-Top Fishing Kayak Scupper Holes/Kayak Mount Tracks

  • 【Two Install Scenes】 This kayak motor mount works with kayak scupper holes and parallel kayak mount tracks, such as sit-on-top kayaks and fishing kayaks, not for declining flush mount fishing rod holders in the kayak.
  • 【No Drilling Requires】 Installing this kayak trolling motor mount kit does not have to drill into your kayak hull, It’s easy to install just simply plug into the scupper holes or mount it on the track, it’s stable and tightened by the supplied ratchet strap.
  • 【Quality Materials】 The materials used to make this kayak motor mount bracket include anodized aluminum, UV stabilized reinforced plastics, and stainless steel fasteners, this kit is extremely durable and built to last for fresh or saltwater use.
  • 【Heavy Duty】 The mounts are designed to fit into kayak scupper holes / tracks that range from 3.54”-31.5” in width, the diameter of the poles is 1 inch. It can be rated to hold up to 66lb (30kgs) thrust trolling motors.
  • 【Motor Mount】 Suitable for mounting electric and petrol trolling motors either right or left hand side.
Check Stock

NyVoozy Transom Trolling Motor Mount for Kayaks, Trolling Motor Mount for Clamp-on Electric Trolling Motors, Maximum Trolling Motor Thrust of 62 Pounds

  • Adding the boat rudder to your boat trolling motor made the trolling motor more stable as trolling motors are known for lack of steering especially when the big wind picks up. With trolling motor stabilizer, even in the big wind, the direction is in your own hand, don’t worry rudder out of control any more. It is recommended using for towing motors which the biggest horsepower up to 3 HP or the biggest thrust up to 70 pounds, recommended the maximum weight for 55 pounds..
  • Our kayak rudder kit measures 3.75″ high x 4.75″ wide and suitable for a 23-32MM” shaft diameter which is boat rudder clamp compatible with most 24-55lb transom mount trolling motors. It’s commonly used for motor guide trolling motors, minn kota trolling motor, newport vessel trolling motor, etc. Designed for kayak, canoe, seayak, angling boat, etc..
  • It can last long time. And the screws are made from hight quality material which is one kind of anti-rust and resistant to hydrochloric acid corrosion material, so you could use it in the seawater..
  • Very easy to install, just with screws, you could install our trolling motor mount to trolling motor only a few minutes. Because of multiple pattern screws, so you could install it on all kinds of boats..
Check Stock

Newport Vessels Steering Triangle for NK-180S Brushless Kayak Motor, Kayak Trolling Motors, and Other Auxiliary Motors

  • USE - steering triangle allows kayak anglers to steer their stern mounted kayak motor using rudder pedals, can also be used to steer kayaks using a variety of other mechanisms..
  • FEATURES - The design features 4 possible adjustment holes for fine tuning your steering cable placement, durable plastic construction, and 2 mounting bolts for rock solid clamping force..
  • DURABLE - It is made from durable plastic, and is ready for whatever you have to throw at it..
  • FITMENT - Compatible with NK-180S Brushless Kayak Motor & most trolling motors. Shaft Diameter: 1.15" (1 1/8 inch), Length: 7.75" (7 3/4 inch), Height: 2.5" (2 1/2 inch), Width: 3.5" (3 1/2 inch).
Check Stock

Bullnose Rudder clamp on boat rudder fits a 1.125\ transom trolling motor shaft. Commonly used for, inflatable Pontoon, Pelican Bass Raider 10E, fishing Kayak, Canoe, Jon boat, etc. USA Manufactured

  • PERFECT SOLUTION - Trolling motors are known for lack of steering especially when the wind picks up, the water is choppy or you want to track in a straight line. Simply add a Bullnose Rudder which is designed to give you better control of your watercraft in most windy conditions, help hold a true course at most trolling speeds, and prevent the boat from spinning as much when the motor is off. Patent no. D712,341S.
  • FIT - The Bullnose Rudder is a boat rudder that fits a 1 1/8" (1.125") transom trolling motor shaft. Please note, it will NOT work on a self deploy bow mount trolling motor. It measures 10.5" high x 4.75" wide and fits a 1 1/8" shaft diameter. It's most commonly used for "but not limited to" minn kota trolling motor, motorguide trolling motors, newport vessel trolling motor, etc. Common tiny boats used are, inflatable pontoon, Pelican Bass Raider 10E, fishing kayak, canoes, jon boats, and more..
  • ESSENTIAL - In most cases it helps hold a true course at both a slow and high trolling speeds. Customers have also said, “it prevents the boat from spinning as much when the motor is off”. Most tiny boats will benefit from having some kind of a rudder set up in the back vs not having a rudder at all. Only takes a few minutes to install a....
Check Stock

Newport Vessels 55lb Thrust Electric Kayak Trolling Motor with Kayak Mount Set

  • FISH INSTEAD OF PADDLE: Get right on top of the big fish with this trolling motor and mount kit from Newport Vessels and you’ll be catching more....
  • MOTOR: The ultra efficient Newport Vessels 5-star rated Kayak Series 55lb Electric Trolling Motor will keep you fishing longer in fresh or saltwater.....
  • MOUNT: The Railblaza Kayak Transom Mount uses two sturdy StarPort HDs to securely outfit your kayak, this tested design can quickly be removed in....
  • INCLUDES: All necessary hardware is included in kit. Install the Railblaza Transom Mount on your kayak, bolt on Newport Vessels Trolling Motor, add a....
  • EEASY TO USE: Switch from paddle only, to motor ready in less than 30 seconds!.
Check Stock

Brocraft Deck Mount Trolling Motor Bracket/Outboard Motor Mount

  • Universal trolling motor bracket for clamp-on type electric trolling motors..
  • Constructed of marine aluminum with black Nylon plastic.
  • Designed for motor to be removed when boat is under engine power or being trailered..
  • For electric trolling motors only. Not for outboard engines of any size..
  • Maximum trolling motor thrust of 36 pounds,Come with a two years limited warranty.
Check Stock

Trolling Motor Plug Receptacle Set, ABPF Marine Boat Power Connector, Waterproof Connector for Motor, 12/24/36/48 Volt Marine Plug for Trolling Motors (Blue,1 Pack)

  • BEST CHOICES FOR TROLLING MOTORS: This plug and receptacle set will work perfectly for marine trolling motors. The unique design plug and receptacle could connect trolling motor and power supply stable. A self-locking design could prevent the plug from suddenly breaking off. It will have the best performance to make the boat easy to work on and ensure your safety because of high-quality materials..
  • PREMIUM MATERIAL: You will see the Corrosion-resistant, Brass gold-plated electrical components. The trolling motor plug and receptacle has the ability of IP67 waterproof, flame retardant, and high-temperature resistance. It can help to connect in any freshwater or saltwater application. Its weatherproof feature makes it durable will keep you safe and protect your boat in extreme weather. It will provide the best service for you..
  • RELIABLE & CONVENIENT: Marine plug and receptacle has the best design, which is very easy to use and self-locking. It has a watertight sealing cap and a gasket to enhance the ability to be waterproof. You don't need to worry about the trolling motor plug will be lossen when the sea has extreme weather. Also, You will feel easy to use th....
Check Stock

Trolling Motor Accessories, Haoguo Paddle Boat Parts, Boat Rudder Fits Most 24-55 Thrust Trolling Motors, Great for Pontoon, Fishing Kayak, Canoe, Jon Boat

  • MORE CONTROL – Turns easily when steering and provides better control in wind and most weather conditions, decreasing the need for oars, it does help to keep your boat on course in the wind, and prevent the boat from spining as much when the motor is off.
  • UNIVERSAL MOUNT – Compatible with most electric trolling motors (24 to 55 thrust). Ideal for use as a canoe rudder, or a inflatable pontoon rudder, kayak rudder, or pelican bass raider 10E rudder. Please note, it will NOT work on a self deploy bow mount trolling motor.
  • EASY INSTALLATION – Complimentary socket wrench for easy installation, it takes only a few minutes to attach the rudder to the shaft of your small watercraft motor and can be mounted in an upright position on the front or back of the shaft. You may even mount it with the short end down (upside down) for shorter motors. A universal design for your needs.
  • BOW MOUNT – Fits the EDGE, Minn Kota, MAXXUM, and FORTREX. The bow mount motor must be a hand cable pull, NOT self deploy. Your bow mount setup needs to have 1ft shaft protruding from the end of the platform allowing enough room to attach the rudder.
Check Stock

Minn Kota 1854053 MKA-53 Electric Steer Trolling Motor Composite Quick Release Bracket Black

  • Designed to meet the increased stress created by high thrust motors and long shaft lengths.
  • Allows bow-mount trolling motors to be quickly mounted and/or removed from boat deck.
  • Low-profile design attaches trolling motor to top bracket and drop in over deck-mounted puck.
  • Constructed of marine grade composite, powder-coated aluminum, and stainless steel to resist rust, corrosion, and discoloration.
  • Recommended for 112 lbs thrust and 72" shaft trolling motors.
Check Stock

Ironwood Pacific HelmsMate Tiller Extension Handle U | Universal Joint Model | 37\-51\ Extendable

  • Full steering and throttle control while sitting away from your trolling or small outboard motor.
  • Fits gas and electric outboard boat trolling motors 15HP and under.
  • Anodized aluminum, corrosion resistant fittings and unbreakable nylon clamp are designed to last.
  • Designed to fill tiller handles on all electric and gas outboard motors 15 hp or under.
Check Stock

Trolling Motor Plug Receptacle Set, 12V/24V/ 36V/48V Plug for Trolling Motor/ Down Rigger/Fishing Reel,Waterproof Marine Boat DC Power Connector

  • Secure trolling motors plug and receptacle set: self-locking design keep trolling motor and power supply tightly to make sure waterproof performance,and weather resistant cover & watertight cap are for more safety..
  • Maximum durable for harsh marine environment:The plug receptacle for trolling motor are made of corrosion resistant sturdy extremely solid built material, and plated brass electrical heavy duty components..
  • The marine trolling motor plug receptical are universal design for 2-wire configuration 12V, 24V, 24/36V, 12/24V, 36V or 48V systems..
  • Suit for:Our plug receptacle perfect for connecting heavy electrical current high amperage draw trolling motor, electric down riggers, deep drop electric fishing reels and other DC powered device. A must have for marine trolling motors owner of Terrova,ulterra Powerdrive terrova,Princecraft etc.
  • Great DC TO DC power connector for freshwater&saltwater,high-current application, compatible with 6 AWG larger gauge wire without overheating..
Check Stock

Watersnake 3 Blade Propeller Kit for 12 Volt Motors

  • COMPATIBILTY: This boat propeller is compatible with Watersnake electric trolling 12 volt Assault and Venom motors..
  • QUALITY: Our Watersnake electric motors are increasing anglers’ catches in more than 30 countries. You’ll see our motors attached to the bows of tournament bass boats, mounted on family fishing boats, locked onto the transoms of the traditional tinny and even powering modern kayaks and canoes. We try to keep things simple at Watersnake and so every day our team focuses on just one thing: making better motors..
  • DURABLE: Watersnake Trolling motor propeller replacement kit is durable and made to last. Designed to chew through the heaviest of underwater grasses and marsh while maximizing thrust to provide speed and efficiency in the water..
  • KIT INCLUDES: Propeller, propeller nut and shear pins..
Check Stock

BKC Brooklyn Kayak Company UH-TM315 Kayak Trolling Motor Mount - Ambidextrous Trolling Motor Mount for Quick and Easy Kayak Trolling Motor Setup

  • Easy Setup and Removal - Motor mount connects to most kayak hulls in a matter of minutes and can be removed in a matter of seconds.
  • Ambidextrous Design - Mount allows for installation of trolling motor for easy use by both left and right handed boaters.
  • Durable Materials - Rust-resistant metal and fade- and corrosion-resistant plastics will stand the test of time and exposure to the element.
  • Lightweight Construction - Hollow but sturdy tubing reduces motor mount weight, allowing for easy handling of mount and adding minimal weight to kayak.
  • Must Have for Fishing - Helps upgrade a paddle only kayak into the ultimate trolling fishing vessel without any permanent hull alterations required.
Check Stock