Reviews Kayak Bilge Pumps

LINGVUM Bilge Pump for Kayak Canoe and Boat - 17 Inch Manual Portable Kayak Hand Water Pumps with Reversible Hose Orange

  • ...se or leak allowing for the maximum amount of suction and discharge that performs better than other hand bilge pumps. Suction spacers can allow water to flow into the manual water pump at the fastest speed.
  • SCENE TO BE USED --- Perfect for emergency water removal in boats, kayaks, canoes or dinghies. With our kayak bilge pump, rest easy knowing that you’ll have a quick and easy way of removing water in those difficult times. Spending time on the water is supposed to be fun! Perfect boating and kayaking accessory.
  • LIGHTWEIGHT & PORTABLE --- This kayak hand pump is light (Only 0.78 pounds), easy to carry and store. Foam padded handgrip is non-slip and provides buoyancy. This manual hand kayak pump does not require power, easy to use, making it ideal for emergency situations or places where there is no power supply.
  • WHY CHOOSE LINGVUM --- This Bilge Pump is the perfect choice for emergency water removal. What you get is not only the high-quality professional products of LINGVUM, but also the after-sales service that makes you feel at ease. We will provide you with 24-hour professional services. If you have any quest....
Check Stock

NRS Kayak Bilge Pump One Size

  • The NRS bilge pump makes it easy to remove unwanted water from any open boat.
  • No hose necessary as the water will spray out over the side of your kayak or canoe.
  • The full length foam float ensures it won't sink if you drop it in the water.
  • Pumps 8 gallons per minute for quick emptying of your boat.
  • Bright color makes it easy to find, even in dim lighting.
Check Stock

Five Oceans Bilge Pump Three-Way Rocker Control Panel Switch with Circuit Breaker, Black, Automatic-Manual-OFF functions, LED light indicator, FO-3851

  • With this Three Way Bilge Pump Switch, you do not have to change a fuse. In case of having a short circuit, just press the button of the circuit breaker to restore the circuit.
  • PROVIDE remote control of automatic bilge pumps or bilge pumps with float switches.
  • 3-WAY Stylish Rocker Switch has Auto, OFF and Manual positions. Power indicator light confirms system power.
  • MANUAL position has spring back feature to prevent bilge pump from continuously running.
  • COMPATIBLE with bilge pumps that draw up to 10A - 12/24VDC. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

creatorele DC 12V 24V 32V Automatic Boat Bilge Float Switch Bilge Switches Flow Sensor for Automatic Electric Water Pump

  • 【Bilge Float Switch】:Can be connected to various submersible pumps, bilge pumps,and water pumps .Shells made of high quality ABS material, the internal metal contacts to ensure reliable start / stop..
  • 【Use with pumps】:Turn pump on when water level reaches 2″(51mm).
  • Turn pump off when water level reaches 3/4″(19mm)..
  • 【Performance】:Long life, switching frequency up to 10 million times.
  • Ultrasonic welding, forming a seal, reliable and secure, not leaking..
  • 【Specification】:Max Amps 12volts: 20A / Max Amps 24volts: 10A / Max Amps 32volts: 8A.
  • 【Easy to Clean】:Ideal flow sensor for bilge pumps Latest design includes a removable base for easy cleaning and servicing..
Check Stock

Seachoice 12201 2-Position Illuminated Toggle Switch – On/Off

  • Two-position on/off toggle switch is suitable for the operation of running and anchor lights, bilge pumps, blowers and baitwell pumps.
  • Suitable for operating running and anchor lights, bilge pumps, blowers, baitwell pumps and more.
Check Stock

Newport Kayak Hand Bilge Pump, Blue

  • DUAL ACTION: Our Kayak Hand Bilge Pump is dual action, meaning whether you're pushing or pulling, it's still pumping water out of your boat..
  • FLOATING: If you drop it overboard, this pump will float back up to the surface for you..
  • EJECTION TUBE: Our pump includes an ejection tube, so the water you pump doesn't end up back in your boat..
  • WHY: Quickly pump water out of the floor of your kayak, canoe, jon boat, inflatable dinghy, sailing dinghy, or other small watercraft. Use the ejection hose to clear the hull so the water isn't ending up back in your boat..
  • INCLUDED IN BOX: Kayak Bilge Pump w/ Foam Float, Water ejection tube.
Check Stock

AMRM-4505-7 Attwood Sahara Automatic Bilge Pump - 500 GPH

  • The Attwood Sahara Bilge Pump is a durable, compact, and easy to install automatic bilge pump. The Sahara has everything contained in one compact yet durable package, making this pump a great option for tight spaces. This series of bilge pump features a 316 stainless steel motor shaft for corrosion resistance and a durable high-impact, glass-filled polyester impeller. The base of the pump has quick, one-handed removal for easy disassembly for cleaning..
  • Pumps include 36" lengths of 16-gauge caulked and tinned copper wire. An automatic-switch bilge pump is a requirement for any vessels 20’ especially those that accommodate overnight passengers and crew. All Attwood bilge pumps come with a 3 year manufacturer's warranty..
  • Mercury-free switch. Test knob for easy operational check Non-restrictive float movement. Larger filter area resists clogging.
  • Free flow of water around housing keeps motor cool. 316 Stainless Steel motor shaft for saltwater corrosion resistance. Durable high-impact, glass-filled polyester impeller.
  • Sahara S500 Part #: AMRA-4505-7, GPH at Open Flow: 500, GPH at 3.3' Head: 350, Hose Size: 3/4" I.D..
Check Stock

Amarine Made 1100gph 12v Boat Marine Plumbing Electric Bilge Pumps (1100gph 12v)

  • 【1100gph with 1-1/8 Hose】The Amarine-made submersible bilge pumps are tough enough for any bilge. Use together with a 1 1/8 inch hose..
  • 【High Flow】: for use from 22-234L / Min (1.32-14.04 cubic meters / hour).
  • 【Small but Efficient】Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow.
  • 【Advantages】Built for the harsh marine environment, good for both saltwater and freshwater. The water-cooled engine ensures a long service life.Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.
  • 【Applications】Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, skiff, dingy, fish tank,as a portable shower, etc..
Check Stock

AMRJ-32903 Mayfair Cartridge Bilge Pump - 1000 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 1000 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock

AMRJ-32503 Mayfair Cartridge Bilge Pump - 500 GPH

  • Mayfair Cartridge Bilge Pumps make cleaning and maintenance easy! Cartridge Bilge Pumps can be removed for cleaning or replacement without the use of a single tool..
  • Lift a tab on the top, give the cartridge a twist, and pull it out.
  • that's all there is to it! Includes all-in-one motor/impeller unit with no loose parts. Feature a thermoplastic body, lip seal shaft seal and a stainless steel motor shaft..
  • 12V cartridge bilge pump with high impact housing. Easy installation and increased longevity. Corrosion, chemical and fuel resistant..
  • Permanent magnet motor along with permanent lubrication. T-Slot for easy float switch attachment.
  • 500 GPH, 3/4" Outer diameter discharge port, 5 Amp Fuse Size. Picture shows the 1000 GPH pump..
Check Stock

Bilge Float Switch, Huazu Automatic Bilge Pump Float Switch Rule Float Switch DC 12V 24V 32V for Boats Ignition Protected Mercury Free

  • DURABLE: The shell of bilge pump float switch is made of high-quality ABS material, which has high strength and durability, and the internal metal contacts ensure reliable start/stop. The switch can be removed from the base for easy cleaning and servicing..
  • USE WITH PUMPS: The bilge float switch is automatic and can be connected to various submersible pumps, bilge pumps, and water pumps. Turn the pump on when the water level reaches 2″ (51mm) and turn off the pump when the water level reaches 3/4″ (19mm)..
  • PERFORMANCE: The switching frequency is up to 10 million times, which can be used for a long time.
  • ultrasonic welding forms a seal, reliable and safe, not leaking..
  • SPECIFICATION: Max Amps 12volts: 20A / Max Amps 24volts: 10A / Max Amps 32volts: 8A.
  • WIDE APPLICATION: This automatic float switch can be widely used in fishing boats, cruisers, runabouts, yachts, aquariums, small swimming pools, water reservoirs, fountains and other places that need drain the water..
Check Stock

Premium Bilge Cleaner Concentrate for Boats Marine Boat Cleaner Soap Grease Oil Fuel and More

  • POWERFUL CONCENTRATE CLEANS BILGE AND REMOVES ODORS: Our bilge cleaner is a powerful oil eater that emulsifies boat oil, grease and transmission fluid to keep your bilge clean and odor-free. Simply pour in bilge pumps for boats and our oil eater cleaner degreaser works for emulsifying and deodorizing the bilge tank and bilge hose. This bilge degreaser super cleaner bilge pump cleaner dissolves fuel, sludge, scum and transmission fuel to keep your bilge pump operating smoothly and efficiently!.
  • EMULSIFIES & ELIMINATES GREASE & OIL: This oil eater degreaser works as a super clean degreaser for the inside of your bilge! Bilge pump boat juice is an essential staple to your boat cleaning supplies kit to keep your sludge pump odor free and running properly. Our concentrated oil eater cleaner and degreaser maintains a proper working marine bilge pump and boat bilge pump without harming fiberglass, plastic or metal on your boat. Regular use keeps an automatic bilge pump running smoothly..
  • FAST & EASY TO USE: Simply pour in and run boat for at least one hour. The natural motion of the boat works to scrub the bilge. Then drain or pump out into a container that is in accordance with the law. Repeat process until no sludge remains. To maintain, repeat process once....
Check Stock

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

  • No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow..
  • It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
  • Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
  • Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock