iFlight Mirco BEC 5V 3A / 12V 2A Output Adjustable Step-Down Voltage Regulator 2-6S for FPV Quad Drone Built 3pcs
- ★ Product Type: High quality male and female housing and 2.54mm female pin header connector compatible with jst-xh connector Kit..
- ★ Temperature Range: -25 Degree Celsius to 85 Degree Celsius(including temperature rise in applying electrical current)..
- ★ Easy to use: This set of connector is easy to install, Just put the crimps in the tool and press them, make the crimp the insulation are all the....
- ★ Widely Application: widely used for speakers, monitors, household appliances, LED lighting, copiers, FAX machines, medical equipment, computers,....
- ★ Package include: This set include JST-XH 2.54mm Female Pin Connectors 320PCS,2/3/4 Pin male and female housing each 20PCS,5/6 Pin male and female....
Check StockApex RC Products JST-XH 2-6S Lipo Battery Charger Balance Board - 2 Pack #1390
- Works With 2S-6S Batteries With A JST-XH Balance Plug.
- JST-XH Connector Is On Most Lipo Batteries.
Check StockRuiLing 2pcs 15cm JST-XH 4S LiPo Balance Power Cable Connector 22AWG Extended Charging Wire Male Female Plug for RC Drone FPV Quadcopter Rechargeable Lipo Battery Charger DIY
- Type: 2 x JST-XH 4S LiPo Battery Balance Charging Extension Wire, ideal for all types of R/C (Cars, Boats, Planes).
- Connector: With balance charger male and female JST-XH plug, wrks with 4S batteries with a JST-XH balance plug..
- Material: Made of 22AWG soft SR wire, 15cm length, shrink tube protected female end, fine workmanship, suitable for large current charging, durable to....
- Convenient & Practical: This Extension Lead is for connecting the Lipo Balance Lead to your charger, making it much easier to connect because the....
- Wide Use: Apply to Most Lipo Battery Chargers, such as: Dualsky, Align, hexTronik, Flightmax, Zippy, Rhino and many other brands of lipo packs..
Check Stock
Crimping Tool Kit, Preciva Dupont Ratcheting Crimper Plier Set with 1550PCS 2.54mm Dupont Connectors and 460pcs 2.54mm JST-XH Connectors for AWG 26-18(0.1-1mm²)
- [Precise and Perfect Workmanship]: This terminal crimping tool is produced with a wire-electrode cutting die set. It can make for a more perfect, precise, and accurate crimp result. It also has a ratcheting mechanism design which can also help you to save energy and strength..
- [Crimping Size Range]: AWG26-18(0.1-1mm²), it can be used for XH2.54, dupont2.54/3.96mm, KF2510/JST connectors and so on..
- [1550PCS Dupont connectors and 460PCS JST-XH connectors]: This crimping tool set comes with 1550 PCS 2.54mm dupont connectors, 460 PCS 2.54mm JST-XH connectors and 1.5m 10-wire ribbon cable. You can choose what you need for your work..
- [High Quality Material]: The crimping tool is made of high quality Alloy Steel and ABS. It creates a sturdy and perfect crimp for DIY electronics, industrial, home improvements and more..
- [After-Sales Service]: Please read the description and the specifications before you purchase. If there are any problems, please contact us directly..
Check Stock
Favrison Micro Parallel Charging Board for Pico / PH1S / PH2S / XH2S Types Battery with XT60 Plug
- ✈Brand new micro battery parallel charging board is compatible with Pico /PH1S /PH2S /XH2S Type Battery. It can Charge up to 9 batteries at the same time.
- ✈PICO(JST1.25) for Blade Inductrix/Tiny Whoop/Blade mCX/E-flite Ultra/Blade Nano QX/UMX Radian.
- PH1s for mCPX/Nano QX 3D and other batteries with 1S PH balance plug.
- PH2S for E-flite UMX series and other batteries with 2S PH balance plug.
- XH2S for Trex 150 batteries and other batteries with 2S XH balance plug.
- ✈The circuit is protected by self-resettable polyfuses and your batteries will be protected in cases of wrong connection. Please note that these fuses may lead a higher IR readout of your batteries, but will not affect the cutoff voltage.
- ✈LED light indicates conductivity. The melting current of each resettable fuse is 1.25A. The maximum total charge current equals 1.25A multiplied by the number of batteries.
- ✈Favrison promises to provide high quality products for customers. All our items will be strictly tested before ship to customers. If you meet any problem or are not satisfied with the micro battery parallel charging board, please feel free to contact us and we will offer you the best service and 100% money back guarantee.
Check Stock5pcs 3S LiPo Battery Balance Power Cable JST-XH 2.54mm Male Female Connector 22AWG Extended Charging Wires for RC Drone Quadcopter
- Usage: For connecting the Lipo balance wire to your charger, making it much easier to connect. Ideal for all types of RC cars, boats, planes..
- JST-XH Connector: The most common Lipo balance connector, male to female JST-XH 2.54mm connector cable..
- Good Stability: The contact material is tinned copper, oxidation and corrosion resistance, ensuring a firm connection every time..
- Soft Sheath: 22AWG silicone wire, 17.5cm, heat resistant(up to 200 °C), not easy to break, durable in use..
- Application: Widely used to connect most of lipo battery, especially for RC helicopter drone, model quadcopter rechargeable Lipo battery DIY toy..
Check Stock2S 1000mAh 7.4V Lipo Battery 2Pcs SCX24 Batteries with PH2.0 & JST Plug 35C Lithium Battery with 2 in 1 USB Charger for WLtoys A949 A959 A969 A979 Most 1/10 1/16 1/18 1/24 RC Cars
- JST & PH2.0 double plug: This 2s battery is a JST plug and PH2.0 plug 2-in-1 rechargeable battery. Lipo battery with JST plug can be used for WL toys....
- Convenient charger: 2-in-1 USB Balance Charger with XH-3P Connector can charge 2pcs 2S batteries at once and the USB interface of the charging cable....
- AB clip special design: AB clips in 2S RC battery's and charger's XH-3pin connector, which can enhance battery durability, protect the battery....
- 300 cycle life: Compared with other 2s lipo batteries, our battery can increase the service life by 30%, which can reach at least 300 times of....
- Lightweight but powerful: 7.4v mini lipo battery size is 55mm*30mm*14mm and only weighs 45g. Although this is a small RC lithium battery, it can....
Check StockArcade 5-pin to 4.8mm (.187\) Micro switch Terminals Conversion Harness Wires Cable for joystick / Jamma Loom Harness extender / MAME Bartop Cabinet Machines / Arcade1Up, Raspberry Pi
- The 5-pin to 4.8mm (.187") Microswitch Terminals Conversion Harness is the perfect choice for connecting joysticks with .187” microswitch terminals and interfacing them to a Sanwa JLF-H harness..
- Simply slide into the existing Sanwa JLF-H or JST-XH harness in your fightstick and the other end of this harness will connect the harness to the .187” terminals on Jamma Loom Harness Extenders..
- Interfaces to a Sanwa JLF-H or JST-XH cable.
- Converts joysticks with standard .187” microswitch terminals for use with Jamma Harness externders.
Check StockGELRHONR 2 Pack RCA Speaker Audio Cable,JST XH2.54mm 3pin Female to Dual RCA with Waterproof Cover Cap Audio Cable-35cm
- ✪ JST XH2.54mm 3pin to Audio RCA Female Connector Speaker Wire Cable , Simply & professional appearance for power cabling.Ideal for car audio, audio collection, motorcycle audio etc stereo player.Recommendable for live or outdoors music engineers..
- ✪ The RCA Speaker Wire with RCA gold plated plug+dust cap, 26awg *1C+S. The other end is JST XH2.54mm 3pin female jack..
- ✪ Waterproof Design:Dust cap prevents and protects the jack from dust and waterroof interference that can disrupt and degrade audio transmission signals.It is ideal for outdoors..
- ✪ Marked with colours: Connectors are marked with colours - white and red, which guarantees proper connection of the right and left channels in the device.Plug and Play..
- ✪ Gold Plated Connecrtor:RCA female auxiliary stereo Y splitter,gold-plated RCA connector for pure, clear audio and minimal signal loss..
Check Stock
Tysun Crimping Tool Kit Ratcheting Crimper Plier Set with 1550 Pcs 2.54mm Dupont Connectors and 460 Pcs 2.54mm JST-XH Connectors for AWG 26-18(0.1-1mm²)
- High Quality Material - The crimping tool is made of high quality Alloy Steel and ABS. It creates a sturdy and perfect crimp for DIY electronics, industrial, home improvements and more..
- Crimping Size Range - AWG26-18(0.1-1mm²), it can be used for XH2.54, dupont2.54/3.96mm, KF2510/JST connectors and so on..
- Lightweight and Portable - Ratcheting crimper plier set is easy to carry and store the accessories at home or work, and can be easily put in your bag, toolbox, and car, convenient for your works..
- Perfect Workmanship - This terminal crimping tool is produced with a wire-electrode cutting die set, can make for a more perfect, precise, and accurate crimp result. Ratcheting mechanism design can help you to save energy and strength..
- Package Includes - This crimping tool set comes with 1550 PCS 2.54mm connectors for dupont, 460 PCS 2.54mm connectors for JST-XH and 1.5m 10-wire ribbon cable..
Check Stock2 Pack All-in-One Lipo Balance Board JST-XH JST-EH TP HP 2-6S - Apex RC Products #1396
- Eliminates The Need For Multiple Balance Boards For Different Balance Plugs.
- Works with JST-XH (Most Common Plug Found On E-Flite, Blade, Align, Turingy And Most Batteries).
- JST-EH - Kokam, HP - Hyperion, Polyquest, and MaxAmps, TP - Thunder Power and Flight Power Batteries.
- Compatible with 2S-6S Lipo Batteries & Most Lipo Charges With 7 Pin Balance Ports.
Check Stock
Qibaok Crimping Tool Kit Ratcheting Crimper with 1550PCS 2.54mm Dupont Connectors and 760pcs 2.54mm JST-XH Connectors for AWG 26-20(0.1-0.5mm²)
- Set Includes: This Ratcheting Crimper set comes with 1550 PCS 2.54mm dupont connectors, 760 PCS 2.54mm JST-XH connectors and 1.5m 10-wire ribbon cable..
- High Quality Material:Made of high quality Alloy Steel and ABS. It creates a sturdy and perfect crimp for DIY electronics, industrial, home improvements and more..
- Applications:Suitable for AWG26-20（0.1-0.5mm²） .Crimping tool is suitable for XH 2.54mm / C3-R 2.54mm / Dupont 2.54mm / JST type connectors / KF2510 / EPS / PCIE / SATA connectors etc..
- Perfect Workmanship: This terminal crimping tool is produced with a wire-electrode cutting die set. It can make for a more perfect, precise, and accurate crimp result. It also has a ratcheting mechanism design which can also help you to save energy and strength. Comfortable to use and easy to Operate..
- Friendly Customer Service & Warranty: We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please do not hesitate to contact us. Thank you~.
Check StockPropel X01 Micro Drone USB Battery Charger Maximum Rooftop pl-1390
- The USB plug can be connected to the computer, mobile phone charger, mobile power supply for battery charging, easy to use..
- Can be used with XH2.54 revolving JST bus conversion cable, and it can charge 3.7V lithium battery through JST plug, which is more widely used..
- The 3.7V lithium battery can be accurately charged, and it will automatically stop charging after being fully charged without overcharging..
- Safe to use, just connect the USB cable to the device to charge normally without monitoring..
- Small size, easy to carry, allowing to charge the battery anytime and anywhere, suitable for X5C, 818a, X1, X4, HS170, X300, X400, F181, F180 quadcopter, etc..
Check Stock
