Reviews Joint Effort

DPTOOL Ball Joint Separator Kit Heavy Duty Control Arms Steering Knuckles Tie Rod Ends Remover Tool 22mm 24mm 27mm 31mm 36mm Compatible with BMW/Benz/Land Rover

  • ...and lower control arms to replace a ball joint. If you are doing any type of suspension work, this is a essential too. It makes separating ball joints as easy as a snap.
  • Not Damage Ball Joint Boot : Use this tool instead of the pickle fork. This tool is quieter, takes less effort, and most important of all, it does not damage the ball join boot. A must have if you are working on the suspension and have to separate the ball joint but are not planning on replacing it.
  • Easy To Use: lubricated the threads on this separator and applied turns slowly to the driver screw. the ball joint will violently popped out of the steering knuckle.
  • Heavy Duty: This ball joint separator made of heavy duty steel, thick and durable, which could withstand a lot of potential energy without breaking. and we offer 12 months warranty.
Check Stock

Crescent 4-1/2\ Mini Straight-Jaw Dipped Handle Tongue and Groove Pliers - RT24CVS-05

  • Straight jaws with an offset, self-locking adjustment grip tightly in any configuration.
  • Rivet construction with precision-machined joint interlock assures smooth, positive joint action with no chance of slipping position or coming apart under load.
  • Unique tooth design grips tighter and provides increased torque with less effort.
  • Maximum durability from alloy steel construction with induction-hardened teeth.
  • Four jaw positions for flexibility and comfort.
Check Stock

E-cowlboy Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit,63mm 48mm CV Joint Fork Adapter,Heavy Duty 10 Pounds Slide Hammer

  • ...ace is large, and it is more comfortable to use. Use this universal joint slide hammer to work more efficiently..
  • 【Quick to Remove CV Axle 】：With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • 【100% SATISFACTION GUARANTEE 】If you're not 100% satisfied with this tool, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty..
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit Heavy Duty 10 Pounds Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • Easy To Remove CV Axle: Use this CV joint puller, You will pull the old stubborn CV axle and get the new axle installed, not need spend a lot of effort, without causing damage to expensive aluminum transmission cases or other components.
  • Heavy Duty: Our slide hammers are heavier and larger than normal ones, easier to use and work more better, hammer weight is 10.5 lb, is twice the average slide hammer, so the generated pulling force is also twice of a normal slide hammer, length is 19.5 inches, have sufficient length slide to generate more force, slide hammer and the VC join fork is made of heavy duty steel, durable and not easy to break.
  • Effient Slide Hammer: Our slide and the slide hammer follow ergonomic design, the handle is curved and have a large surface, which use more comfortable. use our CV joint slide hammer, work more efficiently.
  • Wih 63mm 48mm Joint Fork: Our kit include opening 63mm and 48mm cv joint fork removing adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have....
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • ⚒️ Quick to Remove CV Axle ⚒️ - With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • ⚒️ Perfect Joint Fork ⚒️ - This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • ⚒️ Heavy Duty ⚒️ -This slide hammer weighs 10.5 pounds and is 19.5 inches long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
  • ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use....
Check Stock

Joint-It Simple Grey – Better Polymeric Sand Alternative, Haze-Free Patio Jointing Sand for Flagstones and Pavers, Wet Application Paver Joint Sand 44lbs, Grey

  • FILL JOINTS PROFESSIONALLY: JOINT-IT SIMPLE is a fast, easy, long-lasting, and ready to use polymeric sand alternative joint filler to fill joints of pavers, flagstones, and slabs. The 44-pound bucket is available in 3 colors (Neutral, Grey and Dark Grey) with a quick 4 step application..
  • HAZE FREE: Where polymeric sand hazes and stains pavers and flagstones, Joint-It Simple is a HAZE-FREE formulation..
  • WET APPLICATION: No more waiting for summer to finish your patio, this product can be applied in the sun or the rain!.
  • NO DUST/NON-TOXIC: Polymeric sand creates a lot of dust, which is a known pulmonary irritant and can cause ongoing health problems for users. Our product Joint-It Simple is NON toxic, DUST-FREE, ECO-FRIENDLY and NATURAL to protect your health..
  • MINIMUM EFFORT: All you need is a broom and water to apply! Suitable for filling joints of sandstone, bluestone, limestone, slate, concrete, granite, quartz, and more, this product is water-permeable. Joints must be at least 1/8th inches wide and 1-inch deep..
Check Stock

6 Pieces Caulking Tool Kit - 4 Metal Ball Tile Caulk Finishing Tools and 2 Grout Saw, Tile Joint Tool, Tile Floor Joint Repair Kit, Caulking Edge Tool, Caulk Finishing Tools

  • Suitable for porcelain glue seams: metal ball tile joint finishing tool can be applied to suppress tile grouting, quickly fill the space after use, and make the coating fill the tile joint.
  • It can effectively enhance the smoothness of the tile space, improve labor efficiency and make work easier.
  • Decontamination function: our grouting saw is suitable for cleaning various spaces.
  • It can be applied to remove grout, mortar, flakes, caulking and surface residues that you don’t need.
  • It is easy to use and saves time and effort.
  • The package includes: there are 4 metal ball tile joint finishing tools and 2 grout saws in the package and the ball tile joint finishing tools have 8 sizes.
  • Material: metal ball jointing tools are made of alloy steel and are durable and reusable.
  • The outer layer is protected by a blue plastic sleeve for comfortable and convenient grip.
  • Size: metal ball diameter dimensions: 4 mm/ 0.16 inches, 6 mm/ 0.24 inches, 8 mm/ 0.31 inches, 9.5 mm/ 0.37 inches, 11 mm/ 0.43 inches, 12.7 mm/ 0.5 inches, 15.8 mm/ 0.62 inches, 19 mm/ 0.75 inches.
  • Grouting saw size: handle length 12 cm/ 4.72 inches.
Check Stock

MAEXUS Universal Joint Socket, 1/4\

  • ...s suitable for maintenance, car modification, and transformation of wrench sockets, increases flexibility for sockets and drive tools..
  • 【Professional Quality】 Universal Joints are made of high-quality chrome vanadium steel, can provide professional quality work, allowing you to get twice the result with half the effort. Spring-loaded retaining ball latches into sockets and holds them securely in place. Beveled drive end helps guide extension smoothly onto drive tool, use with air or electric impact wrenches and hand ratchets..
  • 【After-sales service】 MAEXUS Universal Joint Socket, engineered for use with impact drivers, works around obstructions to access hard-to-reach fasteners. The rounded corners inside the driver can avoid cracking caused by stress concentration. If there is any Doubt or Product damage, please click "ask seller" through your order..
Check Stock

KNIPEX 71 21 200 Angeled High Leverage CoBolt Cutters

  • Style: 20-Degree angled head with single-sided joint bar and diagonal cutting edge for flush cutting.
  • uts components like bolts, nails, rivets, etc. up to 5.2 mm dia.
  • Exceptional cutting performance with minimum effort because of new lever action design.
  • Cutting edges additionally induction hardened, cutting edge hardness approx 64 hrc.
Check Stock

Knipex 95 62 160 Wire Rope Shears 160 mm

  • Up to 30% less effort compared to wire rope shears of the same length.
  • Double beared, boxed joint for high stability.
  • Cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC.
  • Comfortable working thanks to the opening spring.
Check Stock

OTC 6007 Lower Control Arm Prying Tool

  • Installing a ball joint on a lower control arm typically requires the effort of two people.
  • With this tool and our 7420 or 7421 pry bar or any 7/8″ diameter pry bar it’s a one-person job.
Check Stock

SIKAFLEX CAULKING 1A ALUMINUM

  • Eliminates time, effort, and equipment for mixing, filling cartridges, pre-heating or thawing, and cleaning of equipment..
  • High elasticity - cures to a tough, durable, flexible consistency with exceptional cut and tear-resistance..
  • Certified to the NSF/ANSI Standard 61 for potable water..
Check Stock

OdontoMed2011 Blue Taylor' Tomahawk Reflex Hammer for Examination ODM

  • USED TO TEST JOINT REFLEXES OR BONE FRACTURES IN THE JOINTS.
  • 7.5 INCH CHROME HANDLE,ACCURATELY AND EFFECTIVELY ELICITS MUSCLE STRETCH REFLEXES, SUPERFICIAL OR CUTANEOUS REFLEXES, AS WELL AS PLANTAR AND ABDOMINAL REFLEXES, WITH LESS EFFORT AND GREATER PATIENT COMFORT..
Check Stock