Reviews Joiner s Hammer

Logan Graphic Products Pro-Framing F49 Studio Joiner Clamp (F49)

  • Extra clamp for use with the F300-1 Studio Joiner.
  • Logan Graphics F49 Vise for use with the Studio Joiner.
  • Speed up the picture framing process by joining 2 corners instead of one.
  • The Studio Joiner Clamp comes fully assembled.
  • Includes a quick adjust clamp for use on moldings up to 2.5 inches wide.
Check Stock

RYOBI RTS08 13 Amp 8-1/4 in Table Saw

  • 6.5 amp, 10,000 rpm motor of the joiner tool provides power for working in the hardest woods.
  • Dual rack and pinion fence of the plate joiner ensure blade and fence are always parallel for accurate joints every time.
  • Integral one-piece fence of DEWALT joiner is adjustable and tilts 0-90 degree.
  • Flush cuts can be made at 0 degree without removing fence.
  • 45-degree locating notch in fence allows indexing off the outside surface of a mitered joint.
Check Stock

VonHaus 8.5 Amp Wood Biscuit Plate Joiner with 4\ Tungsten Carbide Tipped Blade, Adjustable Angle and Dust Bag - Suitable For All Wood Types

  • ACCURATE CUTS: Make quick, accurate biscuit cuts for super-strong miter joints, T-joints, butt joints and edge-to-edge/corner joints with the 8.5 Amp 120V Biscuit Joiner from VonHaus.
  • PRE-SET DEPTH: Pre-set depth stops for biscuit sizes 0, 10 and 20 guarantees accuracy without measuring.
  • ADJUSTABLE FENCE: Adjustable fence allows the tool to be set on an angle for easily joining mitered pieces.
  • DUST COLLECTION: Includes a dust port with dust bag for easy clean-up and an unobstructed view when in use.
  • ERGONOMIC DESIGN: Large, ergonomically designed top grip handle for enhanced comfort. The VonHaus biscuit joiner comes with 1 x 4” blade, the biscuit joiner is also compatible with all biscuit joiner blades that is 100mm (4”) in diameter with a 22mm bore.
Check Stock

PORTER-CABLE Plate Joiner Kit, 7-Amp (557)

  • The joiner tool has 7.0 Amp, 120 V, AC only, 10,000 rpm.
  • 1-inch O.D. dust port of the plate joiner accepts standard bag or can be connected to a vacuum.
  • PORTER-CABLE joiner fence tilts from 0 degree to 135 degree with positive adjustable stop at 90 degree.
  • Includes 4-inch diameter blades for standard biscuit cutting.
  • Seven-position rotating depth stop for FF, #0, #10, #20, Simplex, Duplex, and Max (#6) biscuits.
  • Spindle lock feature allows for single wrench bit changes.
  • Bale handle attached to fence, not motor, for greater stability and added control during cuts.
Check Stock

DEWALT Biscuit Joiner 6.5 Amp 10,000 RPM Retractable 45 Degree Notch For Depth Spots DW682K ,Yellow

  • 6.5 amp, 10,000 rpm motor of the joiner tool provides power for working in the hardest woods.
  • Dual rack and pinion fence of the plate joiner ensure blade and fence are always parallel for accurate joints every time.
  • Integral one-piece fence of DEWALT joiner is adjustable and tilts 0-90 degree.
  • Flush cuts can be made at 0 degree without removing fence.
  • 45-degree locating notch in fence allows indexing off the outside surface of a mitered joint.
Check Stock

AOBEN 8.5 Amp Biscuit Cutter Plate Joiner with No 0 Wood 30 Pcs No 10 Wood 30 Pcs No 20 Wood 50 Pcs 4 Tungsten Carbide Tipped Blade Adjustable Angle and Dust Bag

  • ♕ TYPES OF JOINT：1. Corner Joint，2. Mitre Joint，3. Frame Joint，4. Centre Wall Joint，5. Butt Joint，The Biscuit Jointer Is Suitable For Joints In Solid Wood,Plywood,Chipboard,Fibreboard, Plexiglas And Artificial Marble, Etc. From 8 mm (5/16 in.) Material Thickness..
  • ♕ DUST COLLECTION： Fit The Dust Bag To The Joiner With A Simple Push On Connection. With A Suction Function That Operates While The Biscuit Joiner Is In Use, It Will Keep The Working Area Clear From Flying Debris, Giving You The Best Possible View..
  • ♕ SPECIFICATION：Blade Diameter: 4”，Cutting Speed: 11,000rpm，Groove Width: 5/32 Inches，Amps: 8.5A，Weight: 7.6lbs，Dimensions:17” X 14” X 5” inches..
  • ♕ PRE-SET BISCUIT SIZES：For Convenient Use, The Biscuit Joiner Features Pre-Set Stops For The Most Common Biscuit Sizes – 0, 10, And 20. There’s Also An ‘M’ Setting, Which Puts The Tool In Manual Mode To Allow You To Cut To Custom Depths..
  • ♕ EASY OPERATION AND 2 YEARS WARRANTY: The Adjustable Tilt Fence Can Be Locked In Position Anywhere From 0° To 90° – If you have any questions about the product, please feel free to contact us and we will provide you with 100% satisfactory solutions..
Check Stock

CROSS LAP JIG

  • Create Solid Wood Dowels: This drill jig for straight holes allows you to use solid wood dowels in a contrasting species, non-ferrous metal tubes, a combination of both, or even tie the joint together with leather laces. More advanced decorative effects can be achieved with our dowel joiner by double-drilling to create dowels with a multi-layered core..
  • Decorative Mitered Joints: This wood joiner jig creates beautiful, decorative mitered joints, and also strengthen mitered corners on boxes, drawers and more. Once set, the wood doweling hole drill guide tool can be easily moved and re-clamped to drill the next hole (clamps sold separately)..
  • Molded Reference Lines for Accuracy: The Rockler dowel jig has precisely molded reference lines and clear alignment window for fast, accurate setups. No other dowel drilling jig on the market offers the same functionality, repeatability, and convenience. Extended length bits are required..
  • Wooden Dowel Jig Includes: Our wood doweling jig includes (1) Rockler Corner Key Dowel Guide Tool Jig, (1) 1/8'' guide, (1) 1/4'' guide, and (1) 3/8'' guide..
Check Stock

Ryobi 6-Amp Biscuit Joiner Kit - JM82GK

  • This Plate Joiner Makes Quick And Easy Biscuit Cuts For Super-strong Miter Joints.
  • Butt Joints And Edge-to-edge Cuts. Features Include An Adjustable Fence.
  • With Dust Bag For Easy Cleanup And Preset Depth Stops For Biscuit Sizes 0.
  • Powerful 4” Plate Joiner Is Essential For Any Woodworker. Powerful 6 Amp.
  • Fence Adjusts To A Maximum Depth of 1-1/8 Fence Tilt Adjusts Up To 45 Degrees Dust Port W".
Check Stock

Logan F15 3/8th Inch Loose V-nails For Soft Wood Pack of 200

  • For use in Logan and other V-nailers, specifically the Logan F300-1 Studio Joiner and F300-2 Pro Joiner. Compatible with other v-nailing products..
Check Stock

REXBETI Wood Biscuit Plate Joiner Kit 100-Piece Wood Biscuits Included 4 Tungsten Carbide Tipped Blade Adjustable Angle And Dust Bag Suitable for All Wood Type

  • EASY TO USE - 10,000 rpm motor provides power for working in various types of harder wood. The pre-set depth ( biscuit size: #20, #10, #0 and M ) helps you to cuts slots for multiple biscuit sizes. It's easy to quickly set the fence angle and height and provide smooth cuts is an ideal tool for woodworker beginner.
  • ADJUSTABLE FENCE AND ANGLE KNOB - REXBETI biscuit joiner has three adjustable fence positions at 0, 45 and 90 degrees to make quick, accurate biscuit cuts for easily joining mitered pieces.The angle knob allows you to adjust the fence angle and helps you to tackle edge-to-edge, end-to-edge and miter-to-miter.
  • 4 INCH CARBIDE-TIPPED BLADE AND 100pcs BISCUITS - All 100mm(4 inch) in diameter with a 22mm bore biscuit joiner blades can be used for REX031.And the package comes with 1 x 4 inch carbide-tipped blade and 100pcs packed individually biscuits.
  • DUST COLLECTION BAG - Dust extractable design provides easy clean-up and an unobstructed view when in use. Clean slots holes for better glue adhesion and longer cutter life.
  • ABOUT REXBETI - REXBETI wood Biscuit Plate Joiner Kit is great for you to do DIY.
Check Stock

Logan Graphics Framing Hardware Frame Joiner V-Nails 3/8 Inch for Hardwood Package of 200 for Framing Joining Wood Corners or Stretcher Bars

  • Genuine Logan V-nails made in the USA with premium material.
  • 200 v-nails per box for all your frame joining and wood corner joining needs 3/8 inch depth v-nails for softwood, good for use on hard wood.
  • Loose packed not stacked in package for individual insertion.
  • For use in Logan and other V-nailers, specifically the Logan F300-1.
  • Studio Joiner and F300-2 Pro Joiner. Compatible with other v-nailing products..
Check Stock

Logan Graphics Model F300-1 Studio Frame Joiner with One Package of 200 Logan 3/8 (10mm) V-nails Logan Framing Tool Hardware

  • Logan's manually operated V-Nail Frame Joiner makes V-nailing frames together affordable for everyone..
  • All purpose picture framing joiner designed for light duty framing by the artist, professional or hobbyist-anti-slip pad protects frame moulding face..
  • Drives single v-nail, one at a time, into hard and soft woods by manual lever operation with magnetic nail holder..
  • Joins frames simply and accurately every time for a perfect corner-steel post sleeves prevent flexing..
  • Quick depth setting adjustment and drives all V-nail sizes for extra versatility..
Check Stock

V Nails for Hardwood Picture Frames - 15mm 9/16 Inch - [400 V-Nail Pack Loose] - Ultra Strong Vnail Wedges for Picture Framing - Joining Picture Frame Corners

  • PROFESSIONAL PRECISION framing Vnails for picture frame corners. 400 V-nails loose in a pack, not stacked..
  • ULTRA STRONG - made of hardened steel. These V-nails can be used on hard wood as well as soft wood..
  • COMPATIBLE with Vnailer framing tools including Logan Studio Joiner and Pro Joiner tools.
  • EXCELLENT VALUE BULK PACKS AVAILABLE - see also the 2000 stacked V-nail packs..
  • FramePac are SPECIALISTS for frame making and frame hanging hardware and supplies. Please click on "FramePac" above to see our full range of products..
Check Stock