Reviews Jaw Grinder

Wood Lathe Chuck 4 Jaws Chuck 6inch lathe chucks for woodturning 1inch x 8TPI Thread Lathe Chucks for Woodworking

  • 【EXCELLENT QUALITY】：The well-designed chuck body is made of high-quality iron. The sturdy chuck can withstand high-intensity work without damage. Will greatly extend the service life of the chuck..
  • 【APPLICABLE WORKPIECE SIZE】：Internal Jaw Clamping Range: 0.47-2.2inch (12-55mm). External Jaw Clamping Range: 0.74-5.1inch (19-130mm)..
  • 【FREE ACCESSORIES】：We will provide you with a set of installation tools. These can help you better install the chuck on the lathe..
  • 【HIGH PERFORMANCE JAWS】：Each jaw can be adjusted to center respectively with superior gripping force, this improves chuck flexibility, clamping most shaped workpieces can also be realized..
  • 【APPLICATION】：Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock

Peugeot Paris Rechargeable u'Select, Chocolate finish, 13.5inch electric salt mill, 34cm/13.5in

  • ADJUSTABLE COARSENESS : Adjust the salt and pepper by turning the knob on the top as you desire! Sometimes, you’re looking for very fine seasoning and other times more coarse particles. With this refillable salt pepper grinder set, you get to choose the size..
  • PACKAGED IN A TOP-OF-THE-LINE GIFT BOX – Your jaw is going to drop when you see the quality of the packaging this spice grinder set comes in. It’s almost as lovely as the kitchen utensils themselves! A lucky someone in your life is in for a treat when they get this set..
  • 8 INCHES TALL – Each grinder is 8 inches tall, The see though glass will tell you how much spices are left in the grinder, You will never run out of your spices.
  • INDIVIDUALLY INSPECTED TO ENSURE QUALITY – You may have purchased grinders and shakers in the past but found them to be low quality or broke after a few uses. That’s NEVER concern with this set. Each set is inspected for defects to guarantee the highest quality..
  • YOU'LL PROUDLY DISPLAY THESE IN YOUR HOME – There’s no doubt these innovative salt and pepper shakers get the job done better than any other, but they also will enhance your interior décor. They’ll look fantastic displayed on your countertop or cabinet..
Check Stock

Milwaukee 48-38-0010 Cutter Wheel 2-Pack Sold as 4 Pack

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe or tailpipe with our pipe cutters.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw....
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed....
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from....
Check Stock

Toyo Pistol Grip Glass Cutter (1) (Original Version)

  • Wide base keeps glass at right angles to the grinder head.
Check Stock

VEVOR 2.75-Inch Wood Lathe Chuck, 4-Jaw Precision Self-Centering Keyed Lathe Chuck Set, 1-Inch x 8TPI Thread Mini Lathe Chuck, Woodturning Chuck Jaws, Wood Lathe Accessories for Bowls Vases

  • Applicable Workpiece Size: The wood turning chuck is ideal for mini and lathes. Inner jaws tighten around workpieces varying from 0.9" to 1.9". Outer jaws spread inside of workpieces with pilot holes ranging from 1.4" to 2.5". Comes with a set of accessories, including 1 x chuck key, 1 x Screw Chuck Stud, and 1 x wrench to facilitate your work..
  • High-performance Chuck: Each jaw can be adjusted to the center with superior gripping force. Self-centering improves the flexibility. Clamping most shaped workpieces can also be performed..
  • Simple Operation: This complete lathe chuck set includes a precision jaw and a set of installation tools, which bring much convenience to your operation. The chuck has 1" x 8 TPI Thread and 3/4" x 16 TPI Adapter (Mounted on the Chuck).
  • Compact and Stable: Our mini wood lathe chuck is well-designed and made of high-quality steel. Both sides of jaw teeth and chutes are ground to be sturdy. It is coated with antirust oil to prolong the service life..
  • Versatile Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock

Carbide Burr Set, Tinpec Double Cut Cutting Burrs with 1/8\ Shank & 1/4\ Head, Tungsten Steel Die Grinder Bits for Woodworking, Drilling, Metal Carving, Engraving & Polishing – 10PCS

  • ✔【DIE GRINDER Cutting Burrs】: Carbide burrs casted from Tungsten Steel with amazing HRA003e85. Cutting Burr Demensions: Length:45-50mm, Diameter 1/4'', Shank Length 35mm, Shank Diameter 1/8''..
  • ✔【SHARP DOUBLE CUT】: With grooves evenly crossed, Tinpec double cut cutting burrs are 2x sharper and faster, perfect for all materials like wood, plastic, steel, stone, ceramic and aluminum..
  • ✔【1/8” Shank】: With widely adopted 1/8” shank, Tinpec carbide burrs are compatible with most handheld electric or air powered tools, also in machine tools. Fast and smooth centering with the three jaw chuck..
  • ✔【LONG SERVICE LIFE】: Thanks to our hardened Tungsten Steel and superb tech, Tinpec die grinder bits are 10x more lasting than high-speed steel and 200x than grinding wheel..
  • ✔【PROJECT HELPER】A clear storage case comes with the carbide burr set for easier storage and access. A smart choice for your DIY, engraving, polishing, woodworking and carving projects..
Check Stock

MacWork Tailpipe Cutter，Exhaust Tube Chain Cutter，Features Pipe Cutter Chain/Cutting Wheels，Black

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
  • Keep well oiled, not for use on stainless steel.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed rotation.
  • The cushion grip handles ease pressure on your hand while you increase your grip.
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from during rotation.
  • Lightly lubricate cutting wheels before use.
Check Stock

Theia technical Tips&Electrode Harbor Freight Titanium 45 Plasma cutter 56576 56811 56255 40Amp (30)

  • ...our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed rotation.
  • The cushion grip handles ease pressure on your hand while you increase your grip.
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from during rotation.
  • Lightly lubricate cutting wheels before use.
Check Stock

LaBear Drill Chuck Keyless Mini 3-Jaw Adapter with Quick-change 1/4\ Hex Shank to Hold 1.5-6mm Alloy Black Drill Bits Milling Cutters

  • 【Chuck Adapter】Turns any ¼” cordless power screwdriver into a drill or grinder to quickly switch tasks and keep the job moving.
  • 【Specifications】- 1/4 inch ( 6.35 mm ) Hex shank, 3-Jaw Drill Chuck Adapter.
  • 【How to Use】- Keyless chuck converter easy ON and OFF for driving to drilling in seconds..
Check Stock

Yakamoz 1.5-10mm 3/8-24UNF Quick Connect Impact Driver Conversion Drill Chuck I 1/4-Inch Quick Change Hex Shank with Key

  • Easily change from fastening to drilling with 1/4-inch hex quick connect.
  • Capacity Range 1.5mm - 10mm/ 1/16" - 3/8", Mount: 3/8"-24UNF.
  • Conveniently tighten with classic keyed 3-jaw design.
  • Turns any cordless power screwdriver into a drill or grinder to quickly switch tasks and keep the job moving.
  • All metal construction for durability and long life daily use | NOTE: It can NOT be used counterclockwise!!.
Check Stock

TUNTROL 780W Flex Shaft Rotary Tool, Thicken 1/4' Shaft Foot Pedal Control Hanging Grinder Carver Electric Multi-function Metalworking Tools Repair Kit

  • ...ch give you more confidience on cutting or drilling bigger work pieces..
  • 【Powerful Motor】Our flexible shaft rotary tool is equipped with a powerful and stable 110V 780W motor, which can provide the speed of 500-24000 RPM. This rotary engraver machine is ideal for large-scale work that cannot be completed by mold grinder or rotary tool. Which can enough for limitless purposes from your DIY furniture remodeling to intricate automobile repairs and expert jewelry making..
  • 【Comfortable Stepless Speed Foot Pedal】 The foot pedal adds a lot comfort during work. The ABS plastic foot pedal for flex shaft rotary tool is sturdy and more secured for preventing heat production or transfer..
  • 【1/4" 3-Jaw Chuck】The stable and convenient 3-jaw chuck for the jewelers tools accepts accessories from 1/64", 1/32", 1/16", 3/32", 1/8", 5/32", 3/16", 1/4"to enhance versatility. Attachments are easy to replace and strong clamping force holds them firmly on the flex shaft drill under high pressure..
  • 【105+30pcs Tool Accessories】This high-performance rotary tool kit is extremely useful for cutting, drilling, sanding and polishing in small and delicate areas. These sanding power tools are sensitive enough for glass engraving and also perform high torque operations lik....
Check Stock

OEMTOOLS 27045 Tailpipe Cutter, Features Pipe Cutter Chain w/ Cutting Wheels, Exhaust Pipe Cutter w/ Cushion Grips, Can Be Used as PVC Cutter or Copper Pipe Cutter

  • CUT ON OR OFF THE VEHICLE: Get a clean cut with minimal rough edges or burrs on your exhaust pipe, tailpipe, and when installing or making repairs on catalytic converters.
  • Keep well oiled, not for use on stainless steel.
  • EFFECTIVELY CUT TAILPIPES: Work on tailpipes and exhaust pipes with diameters ranging from 3/4" to 3-1/4" (19-83 mm).
  • Lubricating the exhaust cutter cutting wheels before use will give an even smooth cutting operation and extends the life of the item.
  • EASY TO USE: Cut pipe with our pipe cutter tool in four easy steps.
  • Wrap chain around the pipe, hook the chain onto the plier jaw, close plier jaw until pipe cutter wheels are tight on the pipe, hand rotate chain around pipe until pipe is cut.
  • NO POWER TOOLS NEEDED: Breaking out the Sawzall or angle grinder is unnecessary with our exhaust cutter tool.
  • Work in cramped spaces with one-handed rotation.
  • The cushion grip handles ease pressure on your hand while you increase your grip.
  • BUILT TO LAST: This quality metal pipe cutter's cutting wheels won’t dull easily during use.
  • The head of the exhaust cutting tool won’t bend from during rotation.
  • Lightly lubricate cutting wheels before use.
Check Stock

VEVOR Wood Lathe Chuck, 3.75\ Woodturning Chuck, 4-Jaw Gear Chuck, 1In x 8TPI Thread Mini Key Chuck, Precision Self-Centering Woodturning Chuck Jaws, Wood Lathe Accessories for Bowls Vases

  • Applicable Workpiece Size: The wood turning chuck is ideal for mini and lathes. Inner jaws tighten around workpieces varying from 2" to 2.5". Outer jaws spread inside of workpieces with pilot holes ranging from 2.4" to 3.1". Comes with a set of accessories, including 1 x chuck key, 1 x Screw Chuck Stud, 1 x Allen key, and 1 x wrench to facilitate your work..
  • High-performance Chuck: Each jaw can be adjusted to the center with superior gripping force. Self-centering improves flexibility. Clamping most shaped workpieces can also be achieved..
  • Simple Operation: This complete lathe chuck set features an adaptor that change 1''x 8TPI into M33 x 3.5TPI. A set of installation tools can bring much convenience to your operation..
  • Compact and Stable: Our mini wood lathe chuck is well-designed and made of high-quality steel. Both sides of jaw teeth and chutes are ground to be sturdy. It is coated with antirust oil to prolong the service life..
  • Versatile Application: Applicable to the general lathe, grinder, milling machine, drilling machine and machine accessories, woodworking machinery accessories and other machine tools and accessories..
Check Stock