Reviews J bolts Without Nuts

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

J-Bolt Post Hinge 6\ - Hinge Bolts Thru The Post Includes Nuts - J-Bolt Hinge has 5/8\ Male Pin - Fence Bolt Though Post Hinge - Quantity 2

  • Dimensions - 6" length (4.25" usable thread) - .625 diameter - 5/8" hinge pin - pin height ~1.5".
  • J-Bolt Hinge has 5/8" hinge pin to work with common gate frame hinges.
  • 6" Gate Hinge is made of galvanized steel to prevent rust and corrosion.
  • J-Bolt thru post hinges are easily adjusted even after the gate is installed.
  • Nuts for gate hinge are included - Washers are NOT Included.
Check Stock

D&D Technologies TCHDMA1 Multi-Adjust Heavy Duty Gate Hinges, for Self Closing Wood and Vinyl Gates up to 132 Pounds, 3-Way Adjustable, Gap up to 1 3/8", Black, 2 Count

  • 900LB Capacity per hinge - Ball Bearing With Grease Zerk Fitting LISTING IS FOR 2X COMPLETE GATE HINGE SET.
  • The hinges are precision machined from high strength, solid cold roll steel bar. They are fitted with ball bearing for extra smooth easy operation..
  • Unlike ordinary hinges that will seize up fail to work due to age and weather conditions, these will always operate like new. Zerk fitting for adding grease makes for hinges that will last a very long!.
  • SPECIFICATIONS: -Weight capacity per hinge: 900 lbs -Hardened, heat treated cold rolled steel. -Precision Machined -Ball Bearing -Zerk fitting for greasing -Welding Tabs -J Bolt length is 7-1/4" -3/4" J-Bolt with Zinc Plated Nuts and Washers -Barrel is 4-5/8" by 1-9/16" -Powder coated.
  • Includes: -2x Heavy Duty Steel Hinge Set - 3/4" J-Bolt style with weld tabs - Ball bearing and zerk fitting for grease.
Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

Steel J-Bolt Hinge Doors Gates 1/2 Inch Heavy-Duty Welded Hinge Heavy-Duty Driveway Gates for Welding on Larger Iron or Steel Gates, 2 Packs

  • J-Bolt Hinge is the perfect accessory for your iron gate or revolving door..
  • J hinges made of heavy and strong iron, you can use it for a long time..
  • The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
  • Product dimensions: please see product images..
  • Package Include: 2 Packs welded hinge, 2 bolts, 4 nuts, and 4 washers..
Check Stock

ALEKO Small J-Bolt Hinge for Doors and Driveway Gates - 5/8 Inch - LM144

  • Our j-bolt hinge is the perfect complement to your door or swinging gate.
  • The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
  • Made for ALEKO brand iron doors and galvanized steel driveway gates, but will work anywhere you need a strong and reliable hinge.
  • Comes with all necessary fixings, including (2) bolts, (2) nuts, and (2) washers.
  • For a more in-depth breakdown of dimensions see product images.
Check Stock

ALEKO Small J-Bolt Hinge for Doors and Driveway Gates - 1/2 Inch - LM113

  • Our j-bolt hinge is the perfect complement to your door or swinging gate.
  • The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
  • Made for ALEKO brand iron doors and galvanized steel driveway gates, but will work anywhere you need a strong and reliable hinge.
  • Comes with all necessary fixings, including (2) bolts, (2) nuts, and (2) washers.
  • For a more in-depth breakdown of dimensions see product images.
Check Stock

ABN Screw & Bolt Extraction 25-Piece Remover Tool Kit – Drill Bits, Extractor Pins, Drilling Guides, Extractor Nuts Set

  • EFFORTLESS SCREW & BOLT EXTRACTION: Use the ABN Screw & Bolt Extraction 25-Piece Remover Tool Kit to remove broken fasteners and studs from regular and even recessed bolts, nuts, and screws without breaking or jamming.
  • Take out any fastener with thread sizes from 3/16-inch to 9/16-inch (5mm to 16mm).
  • EASY TO USE: If broken bolt is either above or below the surface, use drill guides.
  • Extractors have flutes/ridges that will grip broken bolt when driven into newly drilled hole.
  • The drive nuts fit tightly over extractor to provide an easy and non-damaging way to turn extractor.
  • Clamp in a vise grip and twist broken bolt off extractor once removed.
  • BUILT TO LAST: For ultimate strength and highest torque without expansion, the drill bits constructed from #4241 high-speed steel (HSS) with polished finish, extractor pins constructed from #6150 chrome-vanadium (CR-V) steel with polished finish, drilling guides constructed from #45 steel with black oxide finish, extractor nuts constructed from alloy steel with sandblasted finish.
  • EASY STORAGE: Heavy-duty 8.6” x 1.6” x 5.6” inch (21.8cm x 4.1cm x 14.2cm) plastic blow-molded carrying case with handle for easy transportation, safe storage, and quick organization.
  • Storage case includes sizing labels for each co....
Check Stock

THEPRO Battery Hold Down Tray Kit, Corrosion-Resistant Steel Storage Battery Holder Adjustable Bracket Clamp for Car, Boat, Marine (23cm Bolt with 28cm Battery Tray)

  • THEPRO Steel Universal Battery Trays have a vinyl coating for rust and corrosion resistance..
  • The groove design prevents the battery from contacting the tray fasteners.
  • the Battery Hold-Down Tray has a solid structure, good load-bearing capacity, and durability. There have 3 choice battery tray sets, please read the description to select the one you need..
  • [27cm J bolt with 34cm Battery Tray Kit] 27cm(10.6inch) J Bolt with Adjustable Hold Down from 146-203mm(Adjusts to suit battery width 146-203mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 4, 24, 27, 29, 31, 60, 74 & 77.
  • [23cm J bolt with 34cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 340mm(13.4in) Battery tray inner size 7.4 in(188mm) width, 13.3 in(337mm) length, fits group 65, 48, 94R.
  • [23cm J bolt with 28cm Battery Tray Kit] 23cm(9inch) J Bolt with Adjustable Hold Down from 161-221mm(Adjusts to suit battery width 161-221mm), with 280mm(11in) Battery tray 7.36 in(187mm) width, 10.94 in(278mm) length, fits group 34, 74, 77, 78, 54, 55.
Check Stock

Crib Screws Parts Replacements - M6 Baby Bed Crib Bolts and Barrel Nuts for Furniture Bed Cot Bunk 16mm 20mm 30mm 40mm 45mm 50mm 55mm 70mm 75mm 85mm Crib Bolts

  • This is a good replacement for your missing M6 baby crib screws and bolts. If you just lost 1 or 2 baby bed bolts or nuts, this kit is your choice. ..
  • This crib screws hardware kit contains16mm bolts, 20mm bolts, 30mm bolts, 40mm bolts, 45mm bolts, 50mm bolts, 55mm bolts, 70mm bolts, 75mm bolts, 85mm bolts and 3 size barrel nuts (D x L: 9.8mm x 11mm, 9.8mm x 12.5mm, 9.8mm x 14.5mm) and one free hex key..
  • Our crib screws bolts and nuts are universal, they are made of carbon steel, they are solid replacements parts for most cribs [but not for all cribs], beds, cot, bunk, tables, chairs, or workbenches, DIY projects, furniture, etc. (for Woodwork Only).
  • Crib Screws Parts Replacements Tips: there are 3 thread pitches for M6 bolt, M6x 1, M6x0.75 and M6x 0.5, our M6 bolts thread pitches are M6x 1, if your original barrel nuts are M6x 0.75 or 0.5, our M6 bolts will not work with your barrel nuts, you can replace the bolts and the nuts together with our new crib screws bolts nuts set..
  • Baby Bed Crib Screws and Bolts: please measure the size of the holes that the bolts fit in to confirm if the hole diameter is 6mm, some cribs use 8mm(M8) bolts. And please check the lengths of the bolts you will need to confirm the right size you will need,.
Check Stock

Floyutin 10 PCS Stainless M8 Wing Nuts Metric Thread Butterfly Clips Fasteners Kit

  • ...meter(8mm/0.31"), thread pitch 1.25mm.Thread Max outer diameter 0.61"/15.6mm,thick 0.35"/9mm.the wing thick 0.2"/5mm, wing length 0.75"/19mm : Fit on to M8x1.25 screws/bolts. Fully threaded, Right hand direction. More detail size please refer to the photoes..
  • Thumb nuts with 2 butterfly wing on each side. Hand twist without tools, Fit for finger tightening or lossening. Allows you to adjust the tightness of the legs easily. Wings are thick(0.34") and don't see an issue with any bend distortion..
  • Easy to install: Serve as a nut, Use metric screws or apprapriate sized bolts to mount ss wing nuts. Just spin on on easily, tighten nicely, and stay in place. Please choice the right metric thread size match bolts or screws and driver..
  • Multi-purpose Application: SS heavy duty threaded can be mounted with bolts. Used it for quick disconnect on bolted connection.Just for hanging bird houses,furniture decoration,hardware lighting, marine battery posts. Better replace the old nuts for getting adjusted or temporarily removed pretty often..
  • 10 pcs wingnuts included. No Bolts/Dirver included. Made of 304 stainless steel, good solid .corrosion resistant,sturdy and durable, Highest quality hardware..
Check Stock

Crib Screws and Bolts Replacement Hardware Kit - Baby Bed Screws 85mm 75mm 70mm 55mm 50mm 45mm 40mm 30mm 20mm 16mm M6 Replacement Bolts Barrel Nuts for Baby Toddler Bed Crib Furniture

  • Crib blots and screws hardware kit contains16mm bolts, 20mm bolts, 30mm bolts, 40mm bolts, 45mm bolts, 50mm bolts, 55mm bolts, 70mm bolts, 75mm bolts, 85mm bolts + 3 sized barrel nuts (D x L: 9.8mm x 11mm, 9.8mm x 12.5mm, 9.8mm x 14.5mm) + one free hex key..
  • Our crib screws bolts and nuts are made of carbon steel, they are solid replacements parts for most cribs, beds, cot, bunk, tables, chairs, or workbenches, DIY projects, furniture, etc. 【NOT for all cribs, Please Check Your Crib Assembly Instruction and Compare Bolt Sizes and Lengths to See if This Kit Will Work】.
  • This is a good replacement for your missing M6 baby crib screws and bolts. If you just lost some bolts or nuts, this kit is your choice..
  • Crib Screws Parts Replacements Tips: there are 3 thread pitches for M6 bolt, M6x 1, M6x0.75 and M6x 0.5, our M6 bolts thread pitches are M6x 1, if your original barrel nuts are M6x 0.75 or 0.5, our M6 bolts will not work with your barrel nuts, you can replace the bolts and the nuts together with our new crib screws bolts nuts set..
  • Baby Bed Crib Screws and Bolts: please measure the size of the holes that the bolts fit in to confirm if the hole diameter is 6mm, some cribs use 8mm(M8) bolts. And please check the lengths of the bolts you will need to con....
Check Stock

Glarks 253Pcs M6 Baby Bed Crib Screws Hardware Replacement Kit, M6x30/40/50/60/70/80MM Hex Socket Cap Screws with Nuts Washers and Tools for Chair Table Cabinets Furniture

  • ...les, chairs, or workbenches, DIY projects, etc..
  • ♛【High Quality Material】: All our screws bolts nuts are made of high-quality carbon steel material, with yellow zinc plated on the surface, make them have high hardness, perfect wear and rust resistance, smooth surface without burr, can be used for long times..
  • ♛【Product Feature】: Socket cap screws and barrel nuts with good match between them used for the manufacture of a solid joint for your furniture. Come with m4 m6 wrench and spanner can make your installation work easier. These screw bolt nuts are perfect for replacing old crib screws and joining wood, boards..
  • ♛【Nice Hardware Kit】: Except m6 socket cap screws and barrel nuts in most common set, we also offer m6 threaded insert nuts, m6 flat washers and m6 flange nuts in this set to make the connection between screws and furniture more fastening. One set included all you need to repair your furnitures, save time and money..
  • ♛【Widely Used】: Our baby bed hardware kit can be widely used for different kinds of furniture such as cribs, cupboards, wardrobes, bu....
Check Stock