Reviews Itx Power

Mini ITX Case Aluminum PC case Silver Desktop DIY Computer Chassis 240Water Cooling/Air Cooling SFX Power Type C Case with Black Tempered Glass Panel…

  • ZZEW unique design: 13.9L capacity with size 13.79*6.42*10.05 inch, Mini ITX B6 is specially designed with front panel 3mm black tempered glass.
  • Support ITX motherboard 170*190*170mm, 2*2.5-inch HDD/1*3.5-inch hard disk, SFX power supply.
  • ITX Case body is full 3.0mm aluminum alloy with edage parts CNC polished hand working. B6 is big and with workmanship high-end among mini itx pc case series.
  • With USB 3.0 Type-C port design+Switch wire+power supply extension cord.
  • 4-sided hollow mesh design makes a high efficent heat dissipation , support 5 fans in max with 240 liquid cooling.
Check Stock

DIY ITX MATX ATX Computer Open Air Case, Aluminum Open Frame Computer Case, PC Test Bench Vertical Motherboard Chassis DIY Kit(Blue Black)

  • Excellent Heat Dissipation: The open chassis design is completely exposed for heat dissipation, freeing up the internal space of the chassis..
  • Open Frame Computer Case: The split hardware structure is adopted, and the open structure provides you with a large internal installation space..
  • DIY ITX MATX ATX Computer Case: Bare block frame, easy to disassemble, easy to assemble, stackable, fully experience the fun of DIY..
  • ATX/M-ATX/ITX Motherboard Case: Support ATX, M ATX, ITX motherboard, power supply supports ATX ordinary large power supply, support expansion of 1 x 3.5, 1 x 2.5 inch hard disk storage, support 7 PCI expansion slots..
  • Aluminum PC Open Air Case: Made of aluminum, it is strong, durable, stable in use and has a long service life..
Check Stock

250 watt Pico PSU ATX Switch PSU Car Auto Mini-ITX Power Supply with Adapter Board for Computer Mainboard and car/Motorcycle

  • Note：input power 11.4V-12.6V,don't too low or highg,or will be damaged！Please read the Product Description before use!.
  • 250 Watt Pico PSU ATX High Mini-ITX Power Supply with adapter board.
  • Pico power supply Short-circuit protection: output shut down when short-circuit.
  • DC input connector: 2.5mm inner diameters, 5.5mm outer diameter.
  • The atx power supply with 24 pin ATX connector, Plugs directly into the ATX connector.
  • Perfect DC PSU for mini ITX Motherboards.
Check Stock

S300 - Mini-ITX PC Gaming Case - Front I/O USB 3.0 Type - C Port - SFX Power Supply 100-130mm -Cable Management System - luminum Mini-ITX Motherboard Small Portable PC Case PCIe 3.0 16X Riser Cable

  • Size: 12.2 x 5.3 x 7.6 in, 8.1L Portable Handheld Minni Itx Case..
  • New features: Front I/O USB3.0 Type-C Port and using pure aluminum wire drawing material, small leather handle on the top..
  • MESH Panels: Three-sided MESH panels, Effectively improve the performance of hot and cold air exchange..
  • Support SFX power supply: Support 100-130mm SFX/SFX-L power supply,the height limit of CPU fan is 60mm..
  • ITX motherboard: 170*170mm specification standard ITX motherboard..
Check Stock

IN-WIN 150W Mini-ITX Slim Case Black BQ656T.AD150TB3

  • Chassis: Mini-ITX s.F.F slim chassis (Ultra small form Factor).
  • Power supply: 150W internal PSU (ip-ad150a7-2).
Check Stock

Aluminum Mini ITX Case with PCI Riser JOYJOM Mini PC Case SFF Small Form Factor PC Case TX Computer Gaming Case Supports GPU Graphics Card Black

  • 【Ultra Mini ITX Case with PCI 3.0 Riser】The Case is only 4.3L capacity, the size is 18.4x10.4x22.3 cm (7.3x4.1x8.8 inch), PCI 3.0 Riser Cable is 18.5cm.
  • 【Compatibility Accessories】Support Standard ITX Motherboard(17x17cm), FLEX-Small 1U Power Supply (15*4*8cm), Graphics Card (17*10*4cm), Hard Disk(2x2.5inch SSD, thickness less than 9mm), CPU Cooler(Less than 36mm).
  • 【High-quality Material】The Body of Case is made of 2.0mm Aluminum Alloy, which has good heatsink performance anf beautiful appearance.
  • 【Packing Include】1* Mini ITX Case, 1*PCI 3.0 Riser and some Screws ONLY.
Check Stock

Yeston Radeon RX 550 Graphics Card,4GB 128-Bit GDDR5 6000MHz VGA + HDMI + DVI-D GPU Desktop Video Gaming Graphics Cards

  • 【 HD Experience 】:Supports 4K HD Resolution. Supports for Blu-ray HD, 4K resolution at 60Hz output, and supports VGA/HDMI/DVI-D output..
  • 【More Quick Cooling】:Metal Heat Dissipation System.
  • 5cm heat dissipation fan, delivers greater airflow performance, and provide a cool and quiet....
  • 【Easy to Use】:Low Power Consumption, requires no pcie power connectors for easy graphics upgrade..
  • 【More Durable】:640 stream processors chip, with single slot design, makes it compatible for HTPC platform and ITX chassis.
  • 【Strong Performance】:Widely used in PCs such as games, office, graphics editing, etc., support ITX chassis..
Check Stock

JGINYUE H97 Mini ITX Motherboard, White LGA 1150 Motherboard Support Intel i5 i7/Xeon E3 (DDR3/M.2 NVME/M.2/VGA DP HDMI-Compatible/PCIe X16/SATA 6Gb/s/2 Gigabit Ethernet)

  • LGA 1150 Mini ITX Motherboard: Equipped with LGA1150 CPU socket, supporting Intel i5/i7 and Xeon E3 series processors..
  • Three image transmission interfaces: This mini itx gaming motherboard supports VGA, DP, and HDMI-compatible high-definition high-performance graphics and audio signal display, you will have more choices in configuration..
  • Dual M.2 slots: The Intel motherboard with M.2 NVME protocol (support NGFF) slot, transmission power up to 32Gbps. Can support M.2 NGFF card.
  • DDR3 dual-channel memory: The LGA 1150 computer motherboard supports dual-channel Non-ECC Unbuffered DDR3, 1600/1333Mhz effective frequency. The maximum memory capacity is 16G..
  • Stable power supply: 4-phase power supply CPU stable power supply, all solid-state capacitor design, equipped with 24+8 pin power interface, to ensure the stable operation of the motherboard..
Check Stock

Iesooy DC 12V 250W 24Pin Pico ATX Switch Pico PSU Auto Mini ITX High Power Supply Module ITX

  • Product introduction: 250 Watt Output 12 Volt DC Input,Fanless design, 100% silent,24 pin ATX connector, Plugs directly into the ATX connector,Perfect DC PSU for mini ITX Motherboards.
  • Working operation: Input voltage: +12V/DC(11.4-12.6V), DC input: 2.5mm inner diameters, 5.5mm outer diameter, Input Current: Max. 21A, Output Power: 250W, Power Efficiency: >= 85%, Working temperature/humidity: 15℃ to 35℃ / 45%-75%, Reposition temperature//humidity: -40℃ to +70℃/ 10%-90%, Atmospheric pressure: 86Kpa—106Kpa.
  • Strong durability: Adopt industrial solid capacitor, ideal for being used in harsh evironment, High performance with high heat-stand feature, more reliable, Solid Polymer Caps on the PCBA, Long life.
  • Wide range of applications: MINI computers, one computer, POS, digital set-top boxes, ITX chassis, network servers, advertising, banking terminals, etc.
  • Package includes: 1 x DC-ATX 250W Module (with cable).
Check Stock

HYTE Revolt 3 Small Form Factor Premium ITX Computer Gaming Case with 700W Gold SFX Power Supply Black

  • The HYTE Revolt 3 ITX Case is a small form factor case with user friendly design, high degree of compatibility and carrying handle for portability at....
  • Compatible with any standard layout ITX form factor motherboard.
  • Easily removable external panels on all sides of the case give users 360-degree accessibility to components and wiring.
  • Comes included 700W 80+ Gold SFX power supply, cables are partially pre-routed to help guide the building experience and save time..
  • Features 2x USB 3.2 Gen 1 Type-A ports, a headset combo jack, and USB 3.2 Gen 2 Type-C port..
Check Stock

GOLDEN FIELD M3S ITX Mini Computer PC Case with Tempered Glass Side Windows Aluminium Silver

  • Tempered Glass Tinted Windowed Side Panel. Intimate Design One of the screw ("open") has the handle function, just screw off a little then you can....
  • Support 130mm Height CPU Radiator & 275mm length Graphic Card.
  • Support Standard 1 x 120mm Case Fan or 1 x 120MM Water Cooling Radiator above, and....
  • Lightweight (aluminum body) compatible with ITX and M-ATX(226mm below)..
  • 【Notice】 MATX(226mm below) motherboard only match SFX PSU, ITX match SFX & ATX Power Supply..
  • Offers room internally for two 3.5" hard drives or three 2.5" HDD/SSDs, which can be installed in the bottom of the case..
Check Stock

Cooler Master RC-130-KKN1 Elite 130 - Mini-ITX Computer Case with Mesh Front Panel and Water Cooling Support

  • Meshed front panel for increased intake of ambient cool air.
  • Supports Mini-ITX motherboards for small profile builds.
  • Unique HDD/SSD mounting bracket positioning allows more space inside.
  • Supports 120 mm water cooling kit at the front of the case.
  • Supports 120 mm water cooling kit at the front of the case thanks to HDD/SSD mounting style.
  • Supports standard ATX PS2 sized power supplies.
Check Stock

A4 Compact ITX PC Case A50 G5 K55 SFX Computer Case Aluminum Mini-ITX Small Computer Case Test Bench Mini Computer Host Tempered Acrylic Side Panel B2

  • Size:312 x 245 x 140 mm(12.28 x 9.64 x 5.5 inch),small ITX computer case.
  • Suitable for ITX motherboard(170 x 170 mm).
  • 2 mute fans on the top of the PC case,extremely strong heat dissipation function.
  • Package including:1 x mini computere case.
Check Stock