Reviews Isolation Switches

STEREN Coaxial Cable Splitter - Coax A B Switch - Coax Splitter 2 Way Two Way Splitter - A B Switch - 2 Way Coaxial Cable Splitter - Coax Cable Splitter - 2 Way A/B Slide Switch - 1 Pack 200-310

  • AFFORDABLE AND EFFECTIVE: Say goodbye to expensive electricians with our AB switch box!.
  • 2 WAY COAXIAL A B SWITCH: Switches between 2 input sources. 75-ohm input/output.
  • HIGH ISOLATION TV AB SWITCH: Steren's AB slide has a 90dB high-isolation and bandwidth of 5-900MHz..
  • F TYPE COAXIAL SWITCH: This coaxial cable switch works for F-type female ports..
  • EASY INSTALLATION: Our coax cable switch makes installation easy with our hardware and adhesive pad..
Check Stock

Philips BASS+ SHB3075 Wireless Headphones up to 12 Hours of Playtime - Matte Black

  • Designed for more bass: big, bold bass you can feel.
  • 32mm speaker drivers with great sound isolation for better Listing experience.
  • True comfort with adjustable ear shells and headband for optimal comfort.
  • Rechargeable battery offers up to 12 hours of playtime.
  • Control calls, music and volume with ear-shell switches.
Check Stock

Philips BASS+ SHB3175 Wireless Headphones up to 12 Hours of Playtime - Matte Black

  • Designed for more bass: big, bold bass you can feel.
  • 40mm speaker drivers with great sound isolation for better Listing experience.
  • True comfort with adjustable ear shells and headband for optimal comfort.
  • Rechargeable battery offers up to 12 hours of playtime.
  • Control calls, music and volume with ear-shell switches.
Check Stock

Philips UpBeat SHB3595 Wireless Headphones with up to 6 Hours of Playtime in-line Mic - Black

  • Designed for more bass: big, bold bass you can feel.
  • 40mm speaker drivers with great sound isolation for better Listing experience.
  • True comfort with adjustable ear shells and headband for optimal comfort.
  • Rechargeable battery offers up to 12 hours of playtime.
  • Control calls, music and volume with ear-shell switches.
Check Stock

Isolation Amplifiers 4.5 - 5.5 SV 8 dB (5 pieces)

  • Isolate and amplify the weak control signal (only a few milliamps of current) by photoelectricity, and finally output a higher power control signal to directly drive the motor, contactor, solenoid valve, etc..
  • The response time is as low as milliseconds and there is no limit on the number of switches. It can directly replace traditional relays, reducing maintenance time and costs..
  • Photoelectric isolation is used between the input stage and the output stage, and the two stages are completely independent, which effectively avoids the instability caused by mutual interference of the system and effectively protects the output node of.
  • Made of high-quality electronic components, stable and reliable performance..
  • Hole punching and PCB module mounting are more convenient..
Check Stock

LoveRPi Compact PoE HAT with PWM Fan Controller for Raspberry Pi 4

  • COMPACT RASPBERRY PI 4 POE HAT: Ideal for non-grounded installation, this NON-ISOLATED PoE HAT features optimized footprint. Must be used with a standards compliant IEEE 802.3af PoE or 802.3at PoE+ switch that complies with Section 33.4.1 for power sourcing equipment (PSE) electrical isolation. "Passive PoE" (DC 24V or 48V) is not standards compliant and may cause damage to equipment if connected improperly. Some Ubiquiti switches are not properly isolated and require isolated PoE HATs..
  • GROUND LOOPS WARNING: Do not use this device with grounded USB peripherals, HDMI displays, and attachments. Please use the professional PoE model with isolation transformer to prevent electrical loops. In non-controlled PoE applications, ALWAYS use the professional PoE model..
  • INTEGRATED PWM FAN CONTROLLER: Based on the EMC2301 SMBus compliant fan controller, this PoE HAT is fully programmable over I2C to control standard 4-pin PWM fans. Set user-space or device-tree based temperature or event triggers for complete fan control from off to maximum RPM. Fan speed tach also provides stall detection, spin-up control, and ramp rate control with 1% accuracy from 500-16K RPM..
  • VENTILATED CASE WITH FAN HIGHLY RECOMMENDED: Do not use this product in an enclosed case without acti....
Check Stock

Acer Predator Galea 500 Gaming Headset, EQ Controller, 3D soundscape Technology, Virtual 7.1 Surround Sound and Gyro Sensor Built-in for Best VR Experience, Black

  • EQ controller switches between 4 modes – 3D soundscape, Sports, Movie & Music.
  • Soft leather large cushion ear pod and elastic headband provides comfort for long time wearing and noise-isolation for immersive experience.
  • Braided cable adds style and extra protection.
  • True Harmony 3D Soundscape Technology & Virtual 7.1 Surround Sound.
Check Stock

MokerLink PoE Switch, 6 Port and 10 Port PoE Switch, Support IEEE802.3af/at, Fanless Metal Plug & Play

  • 6 Port PoE Switch: 4 Port PoE+, 2 Port uplink, 100Mbps, 78W.
  • 10 Port PoE Switch: 8 Port PoE+ 100Mbps, 2 Port Gigabit Uplink, 120W.
  • Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration..
  • Extend function: Both switches support extended functions, port isolation, etc..
  • Widely Used: Built-in Industrial Power Supply. Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks devices, etc. 100% Satisfaction Guarantee - 30-day Money-Back Guarantee with 1 Year Warranty..
Check Stock

SSR-100DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 100A

  • Model: SSR-100DD, single phase Solid State Relay 100A DC to DC control, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 100 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

SSR-25DD Solid State Relay DC to DC (Input 3-32V DC Output 5-60V DC) with Heat Sink, 25A

  • Model: SSR-25DD, single phase Solid State Relay 25A DC to DC control, UL Approved, CE Compliant to EN60950-1.
  • Input voltage 3-32V DC, Load voltage 5-60V DC, Max load current 25 Amp.
  • Rugged epoxy encapsulation construction, high isolation over than 50MΩ(500VDC), high dielectric over than 2.5KV, output snubber circuit protection.
  • No EMI/EFI & Low surge by Zero Cross Trigger method, specially suited to control sensitive, capacitive and Non-saturated inductive loads.
  • SSR switches use semiconductor component acts as a switch for the relay, no moving parts inside, no mechanical wear, no action noise, no mechanical failure, and high reliability.
Check Stock

J-Tech Digital ® Premium Quality SPDIF TOSLINK Digital Optical Audio 3x1 Switch with Remote Control (Three Inputs one Output)

  • Switches three ways of optical fiber signal inputs switch to one set of SPDIF/TOSLINK signal receiving device.
  • Supports Dolby digital & DTS 5. 1, Dolby digital Plus.
  • support PCM stereo 32kHz, 44. 1kHz, 48kHz and 96kHz.
  • input can be selected through remote control or button on the switch.
  • Over-voltage protection can prevent the damage caused by connecting an unmatched power adapter to the machine.
  • Note: Please pull out isolation plastic in the remote before first use. Free lifetime technical support from the manufacture and free 1 year Manufacturer from J-Tech Digital..
Check Stock

MokerLink PoE Switch, 4 Port PoE+, and 8 Port PoE+, Support IEEE802.3af/at, Fanless Metal Plug & Play

  • Include POE-F042F (4 PoE+ Port, 2 Uplink, 100Mbps), and POE-F082GD ( 8 PoE+ Port 100Mbps, 2 Gigabit Uplink).
  • Built-in power supply makes installation easier. Support IEEE 802.3af/at, each port max power supply reached 30W..
  • Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data connectivity. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration..
  • Extend function: Both switches support extended functions, port isolation, etc..
  • Widely Used: Built-in Industrial Power Supply. Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks devices, etc. 100% Satisfaction Guarantee - 30-day Money-Back Guarantee with 1 Year Warranty..
Check Stock

MokerLink PoE Switch, 6 Port PoE Switch, and 5 Port Gigabit PoE Switch, 78W High Power, Support IEEE802.3af/at, Fanless Metal Plug & Play

  • 6 Port PoE Switch: 4 PoE+ Port, 2 uplink port, 100Mbps, 78w.
  • 5 Gigabit Port PoE Switch: 4 Gigabit PoE+ Port, 1 Gigabit uplink, 1000Mbps, 78w.
  • Plug & Play: Support Power Detection function, automatically detect devices, can be compatible with non-POE devices to provide data connectivity. Plug and Play, just plug in the power cord, connect the ethernet cable directly to the device, can be used without configuration..
  • Extend function: Both switches support extended functions, port isolation, etc..
  • Widely Used: Built-in Industrial Power Supply. Durable Metal housing. LED indicator lights. Widely used in IP cameras, Wireless Access Point, Computer Networks devices, etc. 100% Satisfaction Guarantee - 30-day Money-Back Guarantee with 1 Year Warranty..
Check Stock