Reviews Isolated Current Transducer

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Matte White (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

Panamax M4315-PRO Power Conditioner/Surge Protector 15 Amp

  • Panamax M4315-PRO bluebolt outlet 15 amp power MANAGEMENT with control and energy monitoring.
  • Linear Filtration with 3 isolated lift filter banks plus 1 isolated filter bank for high current devices.
Check Stock

Caline CP-08 Guitar Pedal Board Power Supply 10 Isolated Output 9V 12V 18V Effect Pedals with Isolated Short Circuit / Overcurrent Protection

  • Fully Isolated Power Powers for 9V, 12V or 18V PEDAL.
  • Stable Current:10 isolated output with isolated short cricuit and overcurrent protected.
  • Aluminium alloy housing material makes the host stable and light(the host only 1.5kg), freely for player to carry it everywhere.
  • Bright red LED for pedal board lighting in the dark and blinks when instantaneous overcurrent occurs.
Check Stock

AEDIKO 4pcs DC 5V Relay Module 2 Channel Relay Board with Optocoupler Support High or Low Level Trigger

  • Normally Open Interfaces Maximum Load : AC 250V/10A, DC 30V/10A.
  • 2 Channel Relay Module 5V Comes with High-Current Relay,Trigger Current : 5mA.
  • 5V Relay Module is 2 Channel Isolated, Each Relay Can Individually Switch On/Off by An Opto-Isolated Digital Input.
  • Relay Module Designed With Fault-Tolerant , Even If The Control Line Breaks, The Relay Will Not Move.
  • With Optical Coupling Isolation,Triggering More Reliable and Stable.
  • 2 Channel Module Equipped With Screwed Terminal Plate and Fixed Bolt Holes,Standard Interface Can Connect With Microcontrollers and be Controlled by a Wide Range of Microcontrollers.
Check Stock

Intona 7055-C USB 3.0 SuperSpeed Isolator 1kVrms 20kV ESD Protection Supports Full Speed 12Mbps,High Speed hi-Speed 480Mbps and SuperSpeed 5Gbps

  • No external power supply required, up to 500mA current on isolated side. External power can be connected to supply up to 2000mA current on isolated....
  • Galvanic isolation to the USB bus, supports SuperSpeed 5Gbps, hi-speed 480Mbps, full speed 12Mbps and Low speed 12Mbps.
  • 5kVrms signal and power isolation, Advanced ESD protection (20kV).
  • Ultra-quiet power rail isolation for less noise in highly sensitive applications (LT3045).
Check Stock

Current Transmitter Current Transducer Transmitter Transformer Sensor AC Current Converter 0-50A

  • Mutual inductance current monitoring, high current detection accuracy, stable performance, safe isolation of input and output..
  • The measured current of this current transmitter is AC 0-10A/20A/50A.
  • The output signal of this current transducer is DC: 0‑5V/0‑10V/4‑20mA 3 forms are optional..
  • With strong overload capacity, high accuracy, high isolation, high safety, low power consumption.
  • through‑core structure design, isolation withstand voltage up to 2000VAC.
  • hysteresis less than 1%, can be used under strong magnetic field conditions..
  • The shell is made of self-extinguishing material ABS.
  • it is easy to install and use, and there is no need to connect DC in series in the circuit when measuring..
Check Stock

MASTECH AC Current 0.1A-400A Clamp Meter Transducer True RMS MS3302

  • Professional AC Current Transducer Clamp Meter.
  • Working voltage: 600V CAT.II per IEC 1010 - 1.
  • With a packed bag, design for easy carrying.
Check Stock

Hantek DSO2D10 2 CH Oscilloscope with Built-in DDS Generator, 100MHz 1GSa/s

  • ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 400Hz Bandwidth, 1mV/10mA, 650A..
  • ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
  • ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms..
  • ⚡【Application】1.Power circuit measurement and malfunction analysis.
  • 2.Motor drive of frequency converter (or other electronics) measurement.
  • 3.Power electronics equipments measurement..
  • ⚡【What you will get】1*AC/DC Current clamp CC-650,1*English Manual..
Check Stock

INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max

  • 【Mini Split Base Current Transformer】It's the smallest one compared to the similar products (output 100MA).Current Transformer, 100A 100mA AC Current Sensor, Split Core Amp Transformer Sensing Relay, Mini Clip-on Easy to Install CT Without Power Off. current sensor structure sensor.
  • 【Professional Use】Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied.plit Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, Useful for Measuring Whole Building Electricity Consumption.current sensing relay isolation.
  • 【Good Mechanical Properties】Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • 【Snap Joint Structure】The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • 【Easy to use】When you fix the energy meter, you don't need to cut off the power if you use this product. Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter.ac transformer amp meter amp tester.
Check Stock

ANMBEST 2PCS 4 Channel 5V Relay Module with Optocoupler High or Low Level Trigger Expansion Board for Raspberry Pi Arduino

  • It is 4 Channel Isolated 5V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient..
  • Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A.
  • RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move.
  • With optical coupling isolation, triggering more reliable, more stable..
  • EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation..
  • High/Low level trigger can be selected by jumper. Very versatile, you can reverse the input logic with the jumper..
Check Stock

Hantek 6254BE Digital oscilloscope 250MHz Bandwidth Automotive Oscilloscopes Car-Detector 4 Channels 1Gsa/s USB PC Osciloscopio

  • ⚡【AC/DC amp clamp meter】 Hantek AC/DC Current amp Clamp probe with bnc for oscilloscope, 20kHz Bandwidth, 1mV/10mA, 65A.
  • ⚡【Multifunction】It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms..
  • ⚡【BNC Probe】if connect to an oscilloscope by BNC type connector, you're able to observe the current waveforms.
  • ⚡【Application】1.Power circuit measurement and malfunction analysis.
  • 2.Motor drive of frequency converter (or other electronics) measurement.
  • 3.Power electronics equipments measurement..
  • ⚡【What you will get】1*AC/DC Current clamp CC-65,1*English Manual..
Check Stock