Reviews Ir Sensor Control

SZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission(Operating range:20-60HZ).
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where yo....
Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission，Operating range:20-60HZ.
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where y....
Check Stock

RuiLing 1-Pack 3.5mm IR Infrared Emission Line Remote Control Receiver Extension Cord Cable 1m

  • Package: 1 piece remote control extenders, light-weight, small-size and solid, commonly used when your receiver is hidden away in a cupboard, in a different room, or behind your TV..
  • Connector: Come with a standard universal 3.5mm jack male plug at one end and an IR emitter at the other, 1m cable long enough to position the sensor in anywhere in your house..
  • High Sensitivity: Real time transmission without any delay with its high sensitivity sensor. 38kHz frequency range, compatible with various of electronic products and appliances..
  • Purpose: Used with an IR Repeater kit to control a device, allow you to extend remote control ability to a location that the remote control or IR repeater system block can't reach..
  • Application: Allows you to control A/V component by the existing IR controller, such as set-top box, stereo receiver, car audio system, hard disk player, Satellite TV receiver, CD player, DVD player, Bluray player or other components..
Check Stock

TNP IR Infrared Remote Control Extender Repeater Cable (8.2 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit

  • IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV.
  • Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors.
  • Place the IR emitter blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger power supply (sold separately).
  • Compatible with most A/V equipment with infrared sensors (not RF).
Check Stock

SZBJ IR Repeater, IR Remote Repeater, Infrared Remote Control Extender Kit

  • Upgraded repeater: SZBJ ir repeater kit is compatible with ALL IR controlled devices and all other brands of components.
  • Devices control : you can control up to 8 infrared devices (Expandable to 12 devices) from one location with the included IR Receiver (Expandable to 3 receivers). Extra Receivers and transmitters sold separately in our store ..
  • Out of sight : SZBJ ir remote repeater allows you to place any IR controlled devices out of sight (hidden behind doors or in other rooms)of the remote control and still be able to control it..
  • High sensitivity : Real time transmission of the infrared remote signal without any delay with the high sensitivity sensor..
  • Warranty&support : 100% free replacement for any manufacturing defects, and 100% money refund for any unsatisfaction within 30 days. Contact us any time for any problem!.
Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver 10FT

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the....
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip:....
Check Stock

3ft 20KHz - 60KHz Universal IR Blaster and Receiver Cable kit, 3.5mm Jack Cable Compatible with DVR HDMI Extender, DVD Player, Blu-ray Player etc.

  • 【Passes IR Communication】-- Used with an IR Repeater kit to control a device by the existing IR controller, control the IR devices between two rooms such as adjusting the volume or changing TV Channels.
  • 【20-60KHz Range】-- Wider frequency range than the similar infrared receiver cable in the market, which make the cable stronger and provide you better experience..
  • 【High Sensitivity Sensor】-- Easily control DVD player or other HDMI source from remote position up to 10 ft(3m).
  • 【Plug and Play】-- Comes with adhesive backing sticks directly onto different devices,applied to HDMI Extender.
  • IR blaster plugs directly into the IR out port of HDMI Extender, IR receiver directly into the IR in port of HDMI Extender.
  • 【Great Compatibility】-- With 3.5 mm jack connector, the universal IR cable is supportive for most of audio/video devices such as HDMI Extender ,amplifier, cable box, stereo receiver, satellite TV receiver, CD player, DVD player, Blu-ray player or any other components which is controlled by IR signal(NOTE: Please stick the IR Emitters on the IR interface of devices you want to control remotely).
Check Stock

Infrared Repeater System IR Repeater Kit Control Up to 10 Devices Hidden IR System Infrared Remote Control Extender Kit

  • Infrared Repeater Kit controls your IR remote controlled devices that are hidden behind doors or in other rooms. Kit controls up to 10 devices - Expandable to 12 devices.
  • IR Repeater controls up to 10 home theater devices kept behind closet doors or in a closed cabinet with IR Infrared Remote Control Extender Repeater System. This product allows you to control A/V equipment with your existing IR remote controller, such as: amplifier, cable box, stereo receiver, Satellite TV receiver, CD player, DVD player, Blu-ray player, Etc.
  • IR Repeater Kit comes with broadband remote control, it is compatible with almost all the electronics appliances in the market with its wide frequency range. IR remote control repeater ( transceiver) is a product which amplifies the IR signal of your appliances, you may be able to conceal your appliances such as in your TV console or cabinet.
  • High sensitivity, Real time transmission without any delay with its high sensitivity sensor. Remote indication lights on IR receiver:green being power connected while flashing red indicates the signal is being sent. CFL friendly: this duafire unit can be installed in an area with compact fluorescent lighting and work in the most lighting environments.
  • Note: plasma displays emit IR frequencies ....
Check Stock

SZBJ IR Repeater, IR Remote Repeater, Infrared Remote Control Extender Kit (IR Repeater kit 3 New)

  • Upgraded repeater: SZBJ ir repeater kit is compatible with ALL IR controlled devices and all other brands of components such as: Uverse, ATT, Cisco, Scientific Atlanta, Yamaha, Sony, Logitech, Verizon, LG, Apple & more..
  • Devices control : you can control up to 8 infrared devices (Expandable to 12 devices) from one location with the included IR Receiver (Expandable to 3 receivers). Extra Receivers and transmitters sold separately in our store ..
  • Out of sight : SZBJ ir remote repeater allows you to place any IR controlled devices out of sight (hidden behind doors or in other rooms)of the remote control and still be able to control it..
  • High sensitivity : Real time transmission of the infrared remote signal without any delay with the high sensitivity sensor..
  • Warranty&support : 100% free replacement for any manufacturing defects, and 100% money refund for any unsatisfaction within 30 days. Contact us any time for any problem!.
Check Stock

New Network 20.1 IR Replacement TV Remote Control Suitable for Dish Receiver Dish Network Dish TV1 with Learning Code Function for SAT TV DVD AUX 4 Modes

  • Models: Network 20.1 IR Remote for Dish Receiver & Network & TV.
  • This 20.1 Remote will come with one user manual, please read the user manual carefully before you use it..
  • The Network 20.1 IR remote can learn codes from other remotes..
  • Note: Newer receivers (such as Hopper and Joey) will need to be set to IR mode to use this remote, because their original remote is one UHF remote that does not require direct line of sight with the receiver..
  • Using the remote control: Aim at the sensor, avoiding obstacles, make sure to point the remote control toward the remote control sensor on the unit..
Check Stock

ACETECH AC5000 Airsoft Gun Speed Tester BBS Chronograph

  • User-friendly interface with 128*64 pixel LCD.
  • Easier to control: Equipped with 4-way push button.
  • More durable: IR sensor self-calibration as well as IR sensor calibration in production.
  • Friendly UI: Enables user directly select and change ammo parameters in main screen.
Check Stock

DIYmall 5 Pack HC-SR501 Pir Motion IR Sensor Body Module Infrared for Arduino

  • Using Potentiometer 105, output timing is from 0.5S to 200S.
  • Widely used in:Security Products,human body sensors toys,human body sensor lighting industrial automation and control, etc.
  • NOTE: On this retrigger jumper is a solder jumper, and you need solder it by yourself.
  • Pls note that there is no IR emitter in this module, the principle of PIR sensor is to detect the infrared radiation emitted by the human body, it only have a IR sensor (cell).
  • Package Included: 5 X HC-SR501 PIR Infared Sensor.
Check Stock

TNP Infrared Receiver Extender Cable 10FT - 38-56kHz Dual Band IR Sensor External Universal IR Receiver Extender Connector Extension Cord Wire Plug for IR Repeater Systems

  • Compatible with TNP Repeater Extender Infrared Remote Control Hidden System Kit (ASIN: B013318WFW), HDMI Extender Wall Plates.
  • Works with all Universal Remotes and devices with an IR IN jack with compatible IR input tips.
  • Allows you to hide your IR compatible devices behind closed doors in a cabinet or closet and at the same time handle all of the same functions as if....
  • This Ir Receiver Extender Cable Is A Receiver Device For Use With Infrared Remote Controls.
  • Plugs directly into the rear IR IN port of the source Device or IR extender and serves as the IR sensor for remote control input.
Check Stock