Reviews Ir Extension Cable

Cable Matters Infrared Remote Extender Cable, IR Repeater Cable - 10 Feet

  • IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV.
  • Blue LED in IR Receiver bulb verifies the signal transmission.
  • Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor.
  • Route the infrared remote control extender cable out of sight with a wall mounted TV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • Simple installation of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger.
  • Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF).
  • 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.
Check Stock

IR Emitter Extender cable,2-eye transmitter 20-60Hz） cable length 10FT,support TV,DVD,CD DVR cable box set-top box etc.

  • COMPATIBLE:with Most IR Remote Controls. Tested to work with Amplifier, Cable Box, Stereo Receiver, Game Console, Satellite TV receiver, CD/DVD....
  • IR Emitter Mini Stick-On Infrared Emitters Blink Eye. This mini emitter Emits IR signal from modulator to AV component. It is designed to be installed....
  • Two Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR....
  • IR emitter extension cable with single eye that is compatible with devices in 38khz and 3.5mm port.
  • Installation is quick and easy. Simply connect the IR Emitter to your remote control extender and put the IR eyes inside the cabinet. By placing the....
Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver 10FT

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the....
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip:....
Check Stock

SZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter

  • ...adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. The signals are not synchronized and will interfere with each other and cause them.
Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)

  • ...adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. The signals are not synchronized and will interfere with each other and cause them.
Check Stock

StarTech.com HDMI Over Fiber Extender (LC) - 4K 60Hz HDMI 2.0-3300ft (1km) Over Single Mode - 1000ft (300m) Over Multimode Fiber Optic Cable - Transmitter/Receiver AV Converter Kit (ST121HD20FXA)

  • HDMI OVER FIBER EXTENDER KIT: Extend an Ultra HD (UHD) 4K 60Hz HDMI 2.0 signal + 7.1 CH audio up to 3280ft (1km) over single mode or up to 985ft (300m) over multimode fiber cabling w/ an LC connector.
  • RELIABLE VIDEO TRANSMISSION: Fiber connection allows for uncompressed and uninterrupted video transmission & Electromagnetic interference (EMI) immunity and optical isolation for reliable signal integrity.
  • 3x Status LEDs for power/optical link/HDMI link.
  • SERIAL AND IR EXTENSION: Extend serial or IR signals over the fiber cable.
  • IR control extension kit includes 2x IR Receivers & 2x IR Blasters (IR remote not included).
  • RS-232 terminal block connectors for device or display control (up to 115.2Kbps).
  • EASY INSTALLATION: Point to Point connection between AV transmitter and receiver.
  • No IP configuration/drivers/network equipment required.
  • Durable steel housing w/ built-in mounting hardware for a tidy installation.
Check Stock

OBVIS IR Infrared Emitter Extender Cable Extension (10 Feet 3Meter) Single HeadEye 3.5mm

  • IR emitter extension cable with single eye that is compatible with devices in 38khz(IMPORTANT).
  • Plug into IR OUT port for use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
  • Comes with adhesive backing sticks directly onto different devices.
  • Overall length of Infrared Emitter Extender: 10 feet (3 meter).
  • Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and other devices.
Check Stock

TNP IR Infrared Remote Control Extender Repeater Cable (8.2 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit

  • IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV.
  • Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors.
  • Place the IR emitter blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger power supply (sold separately).
  • Compatible with most A/V equipment with infrared sensors (not RF).
Check Stock

IOGEAR HDMI 4- Port 4K 60Hz Switch - 4 In x 1 Out - HDMI 2.0 and HDCP 2.2 Compliant - TrueHD & DTS-HD 7.1 Digital Surround Sound - IR Remote Control - Xbox - PS4 - Roku - HDTV Monitor - GHDSW4K4

  • Connect and switch between 4 HDMI inputs on 1 HDMI enabled HDTV or Display.
  • Supported Resolutions: 480p, 720p, 1080i, 1080p and 2160p.
  • No power adapter required. HDCP 1.2 Compliant.
  • Supports full 3D pass-through. Consumer Electronics Control (CEC) support.
  • Supports DTS / Dolby / DTS-HD / Dolby True HD / LPCM 7.1 / AC3.Switch between devices via front-panel pushbutton or IR remote.Supports IR extension using a receiver extension cable(The IR extension cable is not included in the packaging).Front-panel LEDs for port and power status.
Check Stock

TNP IR Repeater Extender Infrared Remote Control Hidden System Kit - Infrared IR Emitter Blaster Distribution Extension & Receiver Cable for Cable Box Home Theater AV Component Equipment HDTV

  • An ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet for a clean, stylish look.
  • IR Repeater system allows you to Control home theater components located behind cabinet doors.
  • Included with the system is - IR Receiver (2 inches by 1/2 Inch).
  • Hidden IR Repeater Controller (3 1/2 Inches by 2 Inches).
  • Convenient IR confirmation LED with dual frequency to support infrared signals from a wider range of IR remote control such as cable box setup box STB.
  • Support up to six emitter output connections.
  • Additional IR emitter blaster available for purchase at ASIN: B017LQAKXW.
  • If you need to extend the IR blaster emitter cable, you can use a 3.5mm stereo audio extension cable and a 2.5mm to 3.5mm adapter at one end and a 3.5mm to 2.5mm adapter at the other end.
Check Stock

HDMI Extender Balun Over Cat6/Cat5e up to 165 by KenKoy - up to 1080p with HDMI Loop-Out on Transmitter & IR Extension ET164

  • HDMI Extender Balun over cat6 or cat5e cable up to 165'.
  • Full HD support up to 1080p @60Hz and compatible with Dolby, DTS and PCM audio formats.
  • Features HDMI Loop-out passthrough port on the transmitter to split a signal to the local display.
  • EDID management switch and IR extension included to control the HDMI source such as cable box, DVR, blu-ray player from the remote location.
  • Package Includes: 1x Transmitter, 1x Receiver, IR in & IR out Extension cables, 2x Power supply adapters and User....
Check Stock

AMOCAM 8 Units Apartment Intercom Wired 7 Inch Monitor Video Intercom Doorbell Door Phone Audio Visual Intercom Entry Access System

  • The system has 1 IR night vision doorbell and 8 LCD monitors work for 1 - 8 separate individual units..
  • When someone press the unit number on the related button of the doorbell,the unit monitor will ring and show the video..
  • With two-way intercom,IR Night Vision Camera,Unlock the door from monitor (support various Electrical lock).
  • Simple 4-wire connection to Each Unit (you can use regular Cat.5 cable as extension or RVV4 cable extension Transmission distance maximum 100 meters).
  • Easy to install used for rental families apartments or multi-unit house.
Check Stock

TNP IR Emitter Extender Extension Cable (10 Feet) - Quad 4 Head 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One

  • Passes IR communication: Used with an IR Repeater kit to control a device.
  • Extend remote control ability to any room in the house.
  • Adhesive backing allows the emitter to be attached to the IR eye of a device.
  • Quad Heads allow you to control multiple pieces of equipment with only one IR output.
  • For use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
  • The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
  • Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
Check Stock