Reviews Inverter Air Plasma

Dynaloop Plasma Cutter 50Amps, Dual Voltage 110V 220V Plasma Cutter Machine, 8-10mm Cutting Thickness,16Pcs Plasma Cutting Equipment (DC500D 110V220V)

  • 【Inverter plasma cutter】： DC500D has the function of Inverter technology high frequency arc initiation（50/60HZ）. This plasma cutter needs to touch the workpiece to arc, we suggest pilot arc function If you don't like to touch metal to arc..
  • 【Automatic voltage detection】：Plasma cutting machine can adapt to dual-voltage, whether access 110V or 220V circuit can be automatically identified, and displayed on the front panel, no manual adjustment..
  • 【Air Filter Pressure Regulator Combo】：Plasma cutting machines cut materials by compressing gas(Oxygen,air, inert and others depending on material being cut ), Air regulator inside the machine can lower or maintain air pressure and filter moisture and fine particles from the air to reach effective cutting..
  • 【Cutting Thickness】The plasma cutting machine can cut different thicknesses under different voltages. ✨110V: 35A, 30-50PSI (Quality cutting thickness is 6mm#60PSI(0.6Mpa).
  • Max cutting thickness is 10mm#60PSI( 0.6Mpa)).
  • ✨220V: 50A, 30-70PSI(Quality cutting thickness is 10mm#65PSI(0.65Mpa), Max cutting thickness 14mm#65PSI(0.6Mpa))..
  • 【Portable & Multi-purpose】20lb cutting machine can be carried anywhere to cut workpiece, suitable for cutting stainless steel, alloy steel, low ca....
Check Stock

Mophorn 50Amp Plasma Cutter, 110 220V Dual Voltage Plasma Cutting Machine, Max 12MM Thickness Clean Cut, Portable Plasma Cutting Machine IGBT Inverter Digital Plasma Cutting Equipment

  • Powerful Air Plasma Cutter: The Cut-50F plasma cutter can easily cut up to 1/2’’(12.7 mm) metal under maximum output with ultimate portability weighing only 22.7lbs..
  • Compact & Portable: The inverter plasma cutter has a handle and a thoughtful torch design that can provide a sure, comfortable grip, making the whole machine easy to take..
  • High Efficiency & Energy Saving: The cutting machine adopts the inverter technical of switch power, greatly reducing the dimensions and weight of the main transformer. The energy-saving can reach up to 50% as well as efficiency is increased by 30%..
  • Dual Voltage: The ability of the dual voltage allows the plasma cutter to operate at 110V or 220V, with a power of 60HZ. The plasma cutter has the function to supply gas ahead and turn off gas delayed. High cutting speed and cutting smoothly..
  • Wide Application: This plasma cutter can be widely used at automotive, ducting work, repair & maintenance, metal processing, manufacture, site work etc..
Check Stock

Plasma Cutter 110&220V 45Amp 1/2\ Clean Cut 3/5'' Max Cut Plasma Cutting Machiner,HF IGBT Inverter Portable Plasma Cutting Equitment for Aluminum Alloy Mild Steel Cast Iron

  • ✅ 【High-Frequency Cut】Professional Plasma Cutter,high-Frequency Plasma cuts thicker materials than standard DC plasma cutters. Cuts faster with less distortion in the workpiece.It is easy to ignite arc by adopting HF arc ignition.With IGBT inverter technology, It is long life and efficient higher than most machine. It is IGBT inverter plasma power 50/60Hz, High frequency touch metal arc starting.
  • ✅【Cutting Thickness】20-50A DC output: 1/2” ideal clean cutting and 3/4” severance cutting under 220/240V. 20-35A DC output: 1/3" ideal clean cutting and 2/5" severance cutting under 110/120V,air pressure 60PSI recommendation..
  • ✅【Wildely Application】This plasma cutting machine available for cutting most metals: stainless steel,alloy,aluminum,mild steel,carbon steel.
  • widely used for automotive, ducting work,repair/maintenance,metal processing,manufacture ect,lightweight and portable,also suitable home DIY and industrial projects ..
  • ✅【Setup Simple】Automatic Dual Voltage Transfer / Dual Frequency (110/120 V 220/240 V 50/60Hz),With the protection of the electric circuit against over currents, over voltages and low voltages, the cutting welder works in a more safer and professional. Air post time adjust function, the adjustment range is 1-....
Check Stock

Klutch Plasma Cutter with Built-In Air Compressor - Inverter, 120V, 12 Amp Output, Model Number P12AFi

  • Built-in internal air compressor with air pressure gauge and pressure adjustment control no additional air compressor required.
  • Touch Start System with reliable plasma arc initiation.
  • Inverter power technology requires less input power.
  • Extra lightweight design with smaller inverter power system.
  • Cuts mild steel up to 1/8in. thick clean cut and up to 3/16in. thick sever cut.
Check Stock

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • ... TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the plasma cutter will automatically power off. It can be connected to 110 or 220 volt outlets without tools and can be carried in the workshop or on the job site..
  • Package Content: 1×plasma cutter welder machine, 1×tig17V torch, 1×ag60 pilot arc cutting torch, 1×stick holder, 1×earth clamp, 1×conversion wire adapter, 1×2 meters gas hose, 1×2 meters air hose, 1×air regulator, 2....
Check Stock

Herocut Plasma Cutter, 35Amp Plasma Cutting Machine, HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm (CUT35 110V)

  • ✤ Plasma Cutter, 110V 35A cutting machine with IGBT inverter technology, It is long life and efficient higher than mosfet machine..
  • ✤ Very good to cut car flame, Clean cutting thickness 6mm Max cutting thickness 8mm in 110V 60PSI Machine only work in 110V not 220V, Please confirm the voltage before buying this machine. Machine maybe explode if connect it to 220V, Be careful~!.
  • ✤ This plasma cutter with current display and air gauge fixed on panel, Easy read air pressure and current, these functions are great to help the user cut any metal..
  • ✤ The plasma cutter easy to cut stainless steel, Alloy steel, mild steel, Copper etc. Quality cutting torch PT31 come with machine, Max cutting thickness is 10mm at 40Amps 110V 60PSI..
  • ✤ Machine come with 110V power plug, We provide three years warranty for this unit..
Check Stock

2021 UltraArc 205 200 Amp Multi Process Welder TIG Stick Pulse 50 Amp Plasma Cutter Dual Voltage 110v/220v

  • UltraArc 205 model with PULSE , Welds Steel, Stainless Steel and Titanium.
  • IGBT inverter technology, NEW digital interface.
  • 200A TIG / 200A STICK / 50a PLASMA CUTTER COMBO / 5 years waranty.
  • Great Arc stability for TIG/Stick functions due to IGBT inverter design.
  • 1/2" weld on DC TIG, 1/2" cut on Plasma, Dual Voltage 110v/220v.
Check Stock

PrimeWeld 50A Air Inverter Plasma Cutter, Portable Plasma Cutting Machine, Premium and Rugged Plasma Cutter Kit, Automatic Dual Voltage 110V/220V AC with Plasma Torch, 1/2\ Clean Cut, CUT50D

  • THE ULTIMATE PLASMA CUTTER - When precision metalwork cuts matter. As one of our customers said, “It will do the job very well I have had mine for almost three years and it's been very reliable.” Our 50 Amp Digital Air Inverter Plasma Cutter handles cuts up to 1/2" (Max Severance Thickness: 3/4") with ease. Designed for both demanding industrial and construction work, or home and hobby use..
  • MAKES THE PRECISION CUTS YOU NEED - With your Prime Weld Plasma Cutter, you can cut stainless steel, alloy steel, mild steel, copper aluminum, and other metal materials without breaking a sweat. Have limited outlets? No problem. The diversity between 110v and 220v has you covered..
  • TRULY PORTABLE - If you need a portable Plasma Cutter that makes moving from project to project a breeze at a price that won’t break the bank, this is it. As another happy Amazon customer said, “For the price this plasma cutter is amazing…” Add our Plasma Cutter to your cart today and experience our high-quality product craftsmanship for yourself..
  • DESIGNED BY PROFESSIONALS - If you are serious about getting the job done, PRIMEWELD is a brand you can trust backed by our fanatical customer service. Our high-quality Plasma Cutters are perfect for metalwork jobs of all shapes and....
Check Stock

2021 Everlast PowerPro 256Si AC DC TIG Pulse 60a 250a Plasma Cutter Multi Process Welder

  • Digitally controlled IGBT inverter improves performance, reliability and accuracy.
  • Easy to use controls with touch pad control for process and feature selection.
  • Quick change out of torches for easy change from TIG to plasma and back to TIG.
  • Compact, yet powerful TIG welding/Plasma cutting features.
  • Make regular, low dross plasma cuts on steel up to 5/8" thick with a maximum clean cut ability of 3/4".
Check Stock

Plasma Cutter CUT50 50 Amp 110V/220V Dual Voltage AC DC IGBT Cutting Machine with LCD Display

  • 【High Quality】Cut-50 50AMP Plasma Cutter Is Made Of High Quality Components, By Adopting The Most Advanced Inverter Technical Of Switch Power, As....
  • 【Portable Design】 Compact Plasma Cutting Machine With LCD Digital Display And Equipped With A Portable Handle，It Is Very Convenient To Operate....
  • 【Dual Voltage】This Plasma Cutter Can Automatically Adapt To Switch Input Power Of 90V-260V(110V-220V), Plug And Play In Different Environments, No....
  • 【Application】 This is a Professional Plasma Cutter, Which Is Widely Used For Cutting Stainless Steel, Alloy Steel, Mild Steel, Copper And Other....
Check Stock

2021 PowerPlasma 62i 60 Amp CNC compatible plasma cutter

  • Comes with Blow Back IPT-60 plasma torch.
  • IGBT Infineon Modules / Inverter technology.
  • 60AMP Inverter Type cutter @ 60% duty cycle — 5 Year Warranty (Parts and Labor).
Check Stock

2021 PowerPlasma 82i 80 Amp plasma cutter with CNC Package

  • Comes with Blow Back IPT-80M machine plasma cutting torch.
  • IGBT Infineon Modules / Inverter technology.
  • 80AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
  • IDEAL FOR REGULARLY CUTTING_A_MAXIMUM 1″.
  • MAXIMUM CUT FOR QUALITY @ 10-12 IPM (STEEL) 1 1/4″.
Check Stock

2021 PowerPlasma 102i 100 Amp CNC compatible plasma cutter

  • Comes With Blow Back IPT-100 plasma torch.
  • IGBT Infineon Modules / Inverter technology.
  • 100AMP Inverter Type cutter @ 60% duty cycle — 5 Year (Parts and Labor).
  • IDEAL FOR REGULARLY CUTTING_A_MAXIMUM 1 5/8″.
Check Stock