Intex Large Pool Plunger Valve Assemblies
- Includes: Two(2) Intex Large Pool Plunger Valve Assembly (Stepped Washers/Gaskets not included).
- Requires an Intex Pool with 1.5" hose fittings previously adapted with Plunger Valves.
- Replace your old Intex plunger valve assembly, makes changing hoses, filters and pumps a breeze.
- Works with the Intex 1500, 2500, 4000 gallon per hour filtration pumps, Sand Filters as well as the Intex Saltwater Chlorinator and Intex 2000 gallon per hour.
Check StockIntex Large Strainer Rubber Washer and Ring Pack Replacement Parts (2 Pack)
- **Intex Large Strainer Rubber Washer and Ring Pack**.
- Includes: (2) Intex Replacement Rubber Washer & Ring Pack for Large Pool Strainers.
- Replace your Intex 18′ and larger Pool Strainers, requires 1.5″ inside diameter hoses to use.
- Each unit includes: (2) 1 1/2″ O Rings (10262), (2) 2 1/4″ Step Washers (10745), (2) 3 7/8″ Flat Gaskets (10255).
- Used with Intex Models 28633, 28635 and 28621..
Check StockIntex Filter Cartridge Size A
- FILTER: Intex Typa A or C filter cartridges feature a thicker, heavier Dacron paper fiber for more efficient filtration and to keep your pool clean....
- PRODUCT INFO: Dacron filament media with 63 pleats and is easy to clean and is (L x W x H): 4.3 x 4.3 x 8 inches. Fits Intex filter and pump unit....
- FILTER CHANGE: Intex recommends replacing this filter cartridge as often as every 2 weeks for peak pump performance and to keep your water clean and....
- INTEX FILTER: Replaces Intex 29000E filter cartridge and fits any filter pump that uses Intex 59900 filter cartridges, and extend the life of this....
- COMPATIBLE WITH: Krystal Clear Model's: 02, 12, 12R, 108, 108R, 603, 635 and 637 and for pumps with gallons per hour (GPH) of 500, 530, 800, 1000 and....
Check Stock
POOLHACKER Replacement Type B Hose Adapter 1.25' to 1.5' with Plunger Valve Parts for Intex, Hose Adapter B & Shut Off Valve with Gaskets & Nuts for Above Ground Pool(2 Pack)
- 【Assembly Kit】 Includes 2 plunger valves, 2 adapter B, 4 hose o-rings, and 2 step washers..
- 【Awesome Design】One-step solution to on-the-stop, instant filter pump or filter cartridge changes. It can efficiently and conveniently stop the flow of your pool. And also the plunger valve makes it easy to stop and start the water when doing the back flush process on the sand pump. Replace your old plunger valve(s) or upgrade to the Intex Plunger Valve system,makes changing hoses and pumps a breeze!.
- 【Easy Installation】 ①Adapter B requires an Intex Pool with 1.25” hose fittings to work properly. ②Adapter B is connected to the on-off valve and installed on the pool wall..
- 【Compatible】Works with the Intex 1500, 2500 and 4000 gallon per hour filtration pumps as well as the Intex Saltwater Chlorinator and Intex 2000 gallon per hour Chlorinator Pump Combo. Compatible with Intex, Bestway and Coleman above ground pools with the same size of outlet/inlet connection..
- 【Safe & Efficient】The swimming pool parts are made of high quality plastic materials, which is sturdy and durable. Including 2 * Large Pool Plunger Valve Assembly for Intex / Bestway..
Check StockRiver Country On/Off Plunger Valve with Strainer for Easy Set Frame Set & Ultra Frame Pools Intex Bestway Coleman Compatible
- Above ground pools using 1-1/2 inch diameter hoses with 2-1/2 inch threaded connector fittings..
- New easy turn on/off plunger value with Strainer.
- Replace your old plunger valve(s) or upgrade to the Intex, Bestway, Coleman Compatible Plunger Valve system, makes changing hoses and pumps a breeze.
- Works with the Intex 1500, 2500 and 4000 gallon per hour filtration pumps as well as the Intex Saltwater Chlorinator and Intex 2000 gallon per hour....
Check Stock
R172223 Housing O-Ring for Pentair Pool/Spa Filter and Leaf Traps 6-1/4' （2/Pack）
- QUALITY MATERIAL - Our 25076RP intex pool washer and O-ring kit are made of durable quality silicone material, built to last in all types of pools and spas using all types of treatments. Produced to exact standards to match the 1-1/2in Fittings. Making our replacement rubber washer & ring pack for pool equipment last longer than others and working like original one. Keep your pools running in no time..
- PERFECTLY COMPATIBLE - This 25076RP large strainer rubber washer gasket set and ring pack is perfect for replacing Intex 18" and larger pool strainers. Fits for Intex pool parts 10747, 25006, 25010, 28633, 28635 and 28621, ect. Replace your 18' and larger pool strainers, requires 1.5 "ID hose..
- DESIGN & INSTALLATION - Our replacement rubber washer & ring pack is for Intex large pool strainers, designed for use in Intex 10747 plunger valves and strainer connectors to increase the contact area of the hose or pool equipment with the surface of the piston valve to prevent the surface of the Intex pool piston valve from being wearing out. Loosen leaks in piston valve hoses and filter connections..
- REPLACE ADVISE - These washer and ring kit in connectors become flattened and broken over time, must be replaced. It is a very common issue..
Check StockIntex Spa Maintenance Kit, Cup holder & Tray & Inflatable Spa Headrest (2 Pack)
- Intex PureSpa Hot Tub Maintenance Accessory Kit with Brush, Skimmer, & Scrubber, Intex PureSpa Attachable Cup Holder And Refreshment Tray Accessory and Intex PureSpa Inflatable Headrest Accessory (2-pack).
- Includes curved brush for inner sidewall care.
- Durable mesh skimmer net helps fish out leaves and other debris.
Check StockRepair Kit for River Run Tube | Vinyl glue | Blue and White Multi Patches
- Vinyl Patch Kit For Intex River Run I and Intex River Run II Tubes Includes:.
- 1 fl oz (30ml) tube of vinyl cement, 1 Glue Applicator.
- (6) 2.625" round circle Shape OEM Patches (2 Dark Grey, 2 Dark Royal Blue, 2 Multi Color vinyl).
- OEM Patches Sourced from 58825 Intex River Run I Tube Mfg. March 2016.
Check StockUASAM Garden Hose Water Drain Plug Connector for Intex Round Swimming Pool Hose Connectors Parts 10184
- 1.Package Contains : Lawn Garden Hose Drain Plug Adapter ｜For (ONLY) INTEX Round Swimming Pool & Spa Replacement Parts.
- 2.Product Highlights: Replace Part NO.10184 For INTEX Round Metal Frame and Easy Set Pools Fits all 10' to 24'. Round Metal Frame Pools, and 6' to 18'....
- 3.Replace for Intex model part number 10184 . (How this part is connected to the pool drain : plunger pushes flap open on inside of pool wall, and....
- 4.Perfect Design: Ideal for draining the water in your pool Above Ground Round Metal Pool Drain Plug Connector (Adapter). How this part is connected....
- Fits all Intex Wet Set pools as well as all Sand N Sun pools manufactured by Intex..
Check Stock
POOLHACKER Pool Fittings Dual Split Hose Plunger Valve, Pool Parts Replacement Shut-Off Valve with Dual inlets for Intex Above Ground Pool
- ..., instant filter pump or filter cartridge changes. It can efficiently and conveniently stop the flow of your pool. And also the Split Hose Plunger Valve makes it easy to stop and start the water when doing the back flush process on the sand pump. Replace your old pool dual split Hose Plunger Valve or upgrade to the Intex Plunger Valve system, Improve water circulation, makes changing hoses and pumps a breeze!.
- 【Installation Requiresment】①Requires an Intex Pool with two 1.25" hose and 1.5" hose to work properly. ②Suitable for above ground swimming pool with two 1.25” outlet connector..
- 【Compatible】Works with the Intex 1500, 2500 and 4000 gallon per hour filtration pumps as well as the Intex Saltwater Chlorinator and Intex 2000 gallon per hour Chlorinator Pump Combo. Compatible with Intex, Bestway and Coleman above ground pools with the same size of outlet/inlet connection..
- 【Safe & Efficient】The swimming pool parts are made of high quality plastic materials, which is sturdy and durable, and the split dual water inlets effectively disperse and slow down the suction of strong water. Including 2 * Large Pool Plunger Valve Assembly for Intex / Bestway..
- 【100% RISK-FREE】POOLHACKER accessories for Intex Pool will work closely with other po....
Check StockIntex Above Ground Plunger Valves with Gaskets & Nuts + Hose Adapters (2 Each)
- Intex Above Ground Pool Plunger Valve Replacement Part (2 Pack).
- Replacement pool filter pump plunger on/off valve to be used with Intex aboveground pools using 1-1/2" diameter hoses with 2-1/2" threaded connector fittings.
- Replace your old plunger valve(s) or upgrade to the Intex Plunger Valve system, makes changing hoses and pumps a breeze.
- Assembly includes a plunger valve, hose o-ring, and step washer.
- For use with 28635EG, 28633EG, 28671EG, 28645EG, 28647EG, 28651EG, 28677EG, & 28681EG filter pumps.
Check StockIntex Challenger K1 Kayak Kit
- Intex 68307EP Explorer K2 2 Person Inflatable Kayak Set and Air Pump and Intex Challenger K1 1 Person Inflatable Kayak With Oars And Pump.
- Inflatable seats with backrests are adjustable for a comfortable ride.
- The kayak comes with grab lines on both ends.
- Streamlined design for easy paddling and removable skeg provides enhanced directional stability.
- Includes 2 86-inch aluminum oars and an Intex high output hand pump (68614E).
- Noticeable graphics give the kayak a sporty flair and maximize boating safety on the water.
Check StockIntex 29061E Type B Pool Accessory Grey
- Converts Intex pools with 1.25in clamp on fittings to 1.5in screw on fittings.
- Needed when upgrading from an Intex 530gal/hour or 1,000gal/hour filter pump to an Intex 1,500gal/hour or larger system.
Check Stock
