Reviews Intertherm Furnace Heating Element

3pcs Heating Element Coil, Resistance Wire Kiln Furnace Heating Coil Heater Wire Dryer Restring Kit 1200W

  • 【GOOD PERFORMANCE】 These resistance wire has a good thermal efficiency, even heating, safe use and long service life..
  • 【HIGH QUALITY】 This kiln heating element is made from FeCrAl heating alloy, high temperature resistant..
  • 【CAN NOT BE CUT】 The small electric element can not be cut into parts to use, or the power will increase which is dangerous..
  • 【STRETCH BEFORE USE】 Please stretch these resistance wire coils before connecting to power, or they would burn and cause damage..
  • 【WIDELY APPLICATION】 These heating element coil wire can be used in small electric furnace, muffle, heating air conditioning equipment, bakery, electrical heated tube, household electric appliances..
Check Stock

MCAMPAS Universal Silicon Nitride Hot Rod Ignitor.120 Volt Nitride Igniter Replacement For Silicon Carbide Igniters of The Gas-Fired Forced-Air Furnaces, Water Heaters, Boilers

  • 120 volt nitride furnace igniter Replaces hot surface ignitor for gas-fired furnace, boiler, and water heater.
  • How to tell if your igniter is working， if the igniter has continuity your multimeter should read anywhere from 9 to17 Ohms,if there is no reading on the multimeter or very little change, then there is no continuity and you will have to replace the nitride furnace igniter.
  • 1.97" Nitride heating element, 1.18"Ceramic insulator body nonglazed 95% alumina- polished finish, 15-3/4 inch temperature rating 250℃ cable- 20 AWG/ UL 10362 specification.
  • It works compatible with Cook Top, Cook Top and Range, Furnace and Warm Air Movement, Gas Ignition, Hot Surface Igniters, Infrared light source, Pool Heater and Boilers, Process Machinery, Special FX, Water, and Parking Heaters Nitride heating element.
  • Power rating:150 W. Temperature at 120v ± 0.5v .60HZ at 17 sec ≧1180 ℃.This is a very versatile product, very robust with long cycle life. Silicon nitride is extremely rugged and can be handled without fear of breakage or contamination..
Check Stock

AC 220V Kiln Element, 2500W Resistance Wire Kiln Furnace Heating Coil Kit Element Heat Resistant Wire Length 745mm / 29.3"

  • GREAT QUALITY: 2500w kiln element made from FeCrAl heating alloy, high temperature resistant, corrosion resistant, high quality guarantees safety..
  • GOOD PERFORMANCE: Good thermal efficiency, even heating, safe use and long service life..
  • STRETCH BEFORE USE: Please stretch this heating element coil before connecting it to power, or it would burn and cause damage..
  • CAN NOT BE CUT: Electric kiln element can not be cut into parts to use, or the power will increase which is dangerous..
  • WIDELY USED: Used in small electric furnace, muffle, heating air conditioning equipment, bakery, electrical heated tube, household electric appliances..
Check Stock

Miller Nordyne CMF Mobile Home Furnace Parts Foam Door Filter

  • Miller Nordyne Nortek CMF Mobile Home Furnace Parts Foam Door Filter.
  • for Miller, Nordyne, Nortek, Intertherm, Broan and Maytag Furnaces.
  • For models numbers starting with CMF, CMF2, MOC, MAC and CMH.
Check Stock

19x36x.25 Mobile Home Furnace Filter (Aftermarket)

  • Mobile Home Furnace Foam Door Filter compatible with compatible with many Miller, Nordyne, Intertherm, Broan & Maytag Furnaces.
Check Stock

R&DOG Electric Furnace 4 Pole Sequencer Part # 621679 for Nordyne, Intertherm, Miller

  • Electric Furnace 4 Pole Sequencer Part # 621679 for Nordyne, Intertherm, Miller.
Check Stock

(New part) Intertherm Miller Nordyne Furnace Flame Sensor Rod 632316 632367 632396 632143 fits 903600

  • This is an Nordyne Intertherm Furnace Flame Sensor..
  • The total lenth of the flame sensor is 5 inches..
  • Please contact with us - if you have any questions about models / part number !.
Check Stock

MYTDBD Aroma diffuser Ceramic Electronic Aromatherapy Furnace Agarwood Incense Burner for Home/Office/Spa

  • ...heat dissipation and heat insulation, and the internal structure is firm, so as to avoid loosening of the freight process..
  • *Using an electric aromatherapy stove with a timed thermostat, you can periodically turn off and adjust temperature of the incense burner. The aromatherapy is more convenient (the aromatherapy furnace does not contain essential oils and you need to purchase the essential oil separately)..
  • *Electric heating ceramic aromatherapy furnace,Adjustable temperature timer (with adapter for the corresponding country), temperature range: 80-320 ℃, voltage 220V, Can be timed up to 4 hours, one gear per hour，which is basically suitable for any spices..
  • *Temperature reference: essential oil and fragrant waxes 80 ° C, The medium temperature range (180-200°) is mainly used for powders and scented tablets, and some spices with more fat. The high temperature range (220-230°) is mainly used for spices with less wood chips, wood blocks and grease. (can adjust the corresponding temperature according to the fat content of the spices at that time.).
  • *Alumina ceramic heating sheet, energy saving, no pollution, no odor, uniform heating, no open flame, long service life..
Check Stock

MYTDBD Incense Burner Variety Of Options Aroma Diffuser Aromatherapy Furnace for Home/Office/SPA

  • ...ood blocks and grease. (can adjust the corresponding temperature according to the fat content of the spices at that time.).
  • *Using an electric aromatherapy stove with a timed thermostat, you can periodically turn off and adjust temperature of the incense burner. The aromatherapy is more convenient (the aromatherapy furnace does not contain essential oils and you need to purchase the essential oil separately)..
  • *Alumina ceramic heating sheet, energy saving, no pollution, no odor, uniform heating, no open flame, long service life..
  • *The separation between the porcelain body and the heating element is more conducive to heat dissipation and heat insulation, and the internal structure is firm, so as to avoid loosening of the freight process..
  • *Electric heating ceramic aromatherapy furnace,Adjustable temperature timer (with adapter for the corresponding country), temperature range: 80-320 ℃, voltage 220V, Can be timed up to 4 hours, one gear per hour，which is basically suitable for any spices..
Check Stock

3000W 3KW AC220V FeCrAl Kanthal A1 Heating Element Coil Heater Wire Line Spiral

  • Made from FeCrAl heating alloy, high temperature resistant, corrosion resistant..
  • Good thermal efficiency, even heating, safe use and long service life..
  • Used in small electric furnace, muffle, heating air conditioning equipment, bakery, electrical heated tube, household electric appliances..
  • Please stretch this heating element coil before connecting it to power, or it would burn and cause damage..
  • Should not get cut into parts, it will increase the power and can be dangerous..
Check Stock

MYTDBD Incense Burner Aromatherapy Furnace Electronic Ceramic Aroma Diffuser for Office/SPA (Color : Blue)

  • ...ion, no odor, uniform heating, no open flame, long service life..
  • *The separation between the porcelain body and the heating element is more conducive to heat dissipation and heat insulation, and the internal structure is firm, so as to avoid loosening of the freight process..
  • *Electric heating ceramic aromatherapy furnace,Adjustable temperature timer (with adapter for the corresponding country), temperature range: 80-320 ℃, wire length 1.5m, voltage 220V, Can be timed up to 4 hours, one gear per hour，which is basically suitable for any spices..
  • *Using an electric aromatherapy stove with a timed thermostat, you can periodically turn off and adjust temperature of the incense burner. The aromatherapy is more convenient (the aromatherapy furnace does not contain essential oils and you need to purchase the essential oil separately)..
  • *Temperature reference: essential oil and fragrant waxes 80 ° C, The medium temperature range (180-200°) is mainly used for powders and scented tablets, and some spices with more fat. The high temperature range (220-230°) is mainly used for spices with less wood chips, wood blocks and grease. (can adjust the corresponding temperature according to the fat content of the spices at that time.).
Check Stock

MYTDBD Electronic Incense Burner Aroma diffuser Aromatherapy Furnace with Timing Temperature Control for Home/Office/SPA，blue ，green (Color : Green)

  • ...heat dissipation and heat insulation, and the internal structure is firm, so as to avoid loosening of the freight process..
  • *Using an electric aromatherapy stove with a timed thermostat, you can periodically turn off and adjust temperature of the incense burner. The aromatherapy is more convenient (the aromatherapy furnace does not contain essential oils and you need to purchase the essential oil separately)..
  • *Electric heating ceramic aromatherapy furnace,Adjustable temperature timer (with adapter for the corresponding country), temperature range: 80-320 ℃, voltage 220V, Can be timed up to 4 hours, one gear per hour，which is basically suitable for any spices..
  • *Temperature reference: essential oil and fragrant waxes 80 ° C, The medium temperature range (180-200°) is mainly used for powders and scented tablets, and some spices with more fat. The high temperature range (220-230°) is mainly used for spices with less wood chips, wood blocks and grease. (can adjust the corresponding temperature according to the fat content of the spices at that time.).
Check Stock

Direct Igniter St. Croix Auger Motor 80P20278-R-AMP Amazon

  • SRV7000-660-AMP igniter compatible: PelPro PP130, PP130-B, PP60, PP60-B, PP70, PPC90 cast iron, TSC90 cast iron, pleasant hearth.
  • The total length of the element is 4 7/8”, 12” lead wire, 300 W, 110/120 V AC furnace to replace the heating element..
  • FRIENDLY SERVICE - If you have any questions, please contact us through Amazon Messenger..
Check Stock