Reviews Internal Grooving Tools

OSCARBIDE 3/4”Shank 9 Pieces/Set Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Nickel Plated indexable Insert Holders for Turning Grooving Threading Cut Off

  • 3/4” Metal lathe cutting tools includes 1pcs External Parting&Grooving Tool Holder QA12R-30, 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S12S-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • All metal lathe cutting tools and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Turning Insert Holder SVJCL 1212H 11, with 1PCS Insert VBMT 221 (VBMT110304), Square Shank, Steel, External, Screw Clamp, Left Hand, 12mm Width x 12mm Height Shank, 100mm Length.

  • 3/8"Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20,6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S06M-SCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general lathe tool holder.
  • Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Metal Lathe tools suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • Replacement inserts of this kit , please search the Asin of this item: B0875TPL4Y on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

GBJ- MGIVR2016-2 + 10PCS MGMN200-G Boring Bar 2mm Grooving Insert Lathe Cutting Tool Holder 16mm 5/8\ Grooving Cut-Off Cutter for MGMN200 Carbide Inserts Holder (MGIVR2016-2 +MGMN200)

  • 1. Model : MGIVR2016-2 Right hand Internal Grooving holder / Boring Tools.
  • 2. Inserts applied: MGMN200-G (Grooving inserts).
  • 3. Shank Diameter: 5/8" inch / 16*16mm, Overall length: 180mm/7.08" , Groove width: MGMN200.
  • 4. Package includes: 1Pc of MGIVR2016-2 Tool-holder + 10PCS MGMN200-G NC3020 + Wrench : L.
  • 5. Advantage: High hardness, good toughness, good wear resistance, heat resistance. Imported base material, high-quality coating.
Check Stock

Maifix MGIVR2016-1.5 16mm Shank CNC Internal Turning 1.5mm Width Groove Cutting Metal Grooving Machine Tools

  • 【Application】-Internal Grooving/Boringg Tools.
  • 【Size】- Shank: 16mm, Groove Width: 1.5mm.
  • 【Package】- 1Pcs Tool-holder with Accessory Installed, Not Include the Carbide Inserts.
  • 【Advantage】- Stable Turning With Cutting Forces, Improve Productivity.
Check Stock

OSCARBIDE 9 Pieces/Set 1/2"Shank Nickel Plated Indexable Carbide Lathe Turning Tool Holder and Boring Bar,CNC Heavy-Duty Metal Lathe Tools for Turning Grooving Threading Cut Off Tools

  • 1/2” Metal lathe tools include 1pcs External Parting&Grooving Tool Holder QA08R-20 , 6pcs External Turning tool holder SCBCR,SSSCR,SCLCL,SCLCR,SWGCR,SDNCN ,1pcs SER External Threading Tool Holder,1 pcs S08M-DCLCR Boring Bar.
  • Turning Holders are made of high quality steel with Nickel Cotated, which are more durable moistureproof, dust-proof than general holders.
  • Carbide Cutters bits are made of carbide with Tin-coated,with positive rake cutting angle and built-in chip breaker for general purpose cutting action.
  • Lathe turning tool holders Suitable for varied grooving,external/internal turning and threading,for semi-finishing/roughing steel metal.
  • Replacement inserts of this kit , please search the Asin of this item:B0BHWBR7V8 on Amazon to buy it. All holders and inserts packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Sandvik Coromant RF123H13-2525B-220BM Steel CoroCut 41641 Shank Tool for Face Grooving Holder, 0.51\ Maximum Depth of Cut (Pack of 1)

  • CoroCut 1-2 25 mm square shank external machining-shank tools.
  • Square shank parting grooving face grooving holder CoroCut tool holder.
Check Stock

Accusize Industrial Tools 1/2 x 1/2 x 4 in. (Width by Height by Oal) Hss+5% M35 Cobalt Lathe Tool Bit, 5095-0032

  • M35 Cobalt (HSS + 5%) square lathe tool bits blank, much harder and more durable than M2 high-speed steel lathe tool bits.
  • Ground for heavy-duty cuts on casting and forgings. It has significantly higher wear resistance than M2 HSS。.
  • You may machine it to turning tools to do any lathe turning operations. The possibilities are infinite..
  • Step turning, taper turning, chamfer turning, contour turning, facing, grooving, parting, cut-off, internal threading, outside threading, boring, knurling, etc..
Check Stock

HHIP 2301-3108 TNSR08-2V Notch Style External Threading and Grooving Tool Holder

  • Excellent all-purpose system for threading and grooving.
  • Clamping system draws the insert consistently back into the pocket for superior repeatability.
  • Fully interchangeable with other similar "notch" type tools and inserts.
  • Can be used with our right hand notch T/NT-2R #6062-5001 threading and T/NG-2 grooving inserts.
Check Stock

HHIP 3900-5308 Bushing for A Series S Holder 40-Position Tool Post, MT2 Taper, 1-3/16\ Holder Hole Diameter

  • 1. Model : MGIVR2016-2 Right hand Internal Grooving holder / Boring bars.
  • 2. Inserts applied: MGMN200-G (Grooving inserts).Inserts with Nano coating endow them strong impact resistance, good versatility with high precision, high finish and high wear resistance..
  • 3. Shank Diameter: 5/8" inch / 16*16mm, Overall length: 180mm/7.08" , Groove width: MGMN200.
  • 5. Advantage: Suitable for hard steel and stainless steel parts processing. High hardness, good toughness, good wear resistance, heat resistance. Imported base material, high-quality coating.
  • 4. Package includes: 1Pc of MGIVR2016-2 Tool-holder +1PC MGMN200-G Colorful coating insert + Wrench : L.
Check Stock

THINBIT 3 Pack LGOR095D5CR010 'L' Series, Uncoated Carbide, Static O-Ring Grooving Insert for Non-Ferrous alloys, Aluminium, Plastic Without Interrupted cuts.

  • See Downloads section below item photos for detailed product information, technical information and compatible toolholders..
  • Uncoated DURA-MAX 5000 carbide Static O-Ring grooving insert for non-ferrous alloys, aluminium, plastic without interrupted cuts..
  • .095" tip width with .010" corner radii. 7 degree included angle. .250" depth of cut. Internal grooving with 1.250" minimum bore..
Check Stock

TJATSE Carbide Inserts MGMN200-G Grooving Inserts for MGEHR/MGIVR CNC Lathe Cut Off Turning Tool-5 Pieces/Pack

  • ♥Size Information: 5pcs MGMN200-G carbide insert: 6mm x 3mm x 2mm, fit for MGEHR / MGIVR grooving cut-off tool..
  • ♥MGMN200 Carbide Inserts made of solid carbide, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance..
  • ♥Specially designed chip breaker allows for narrower chips to promote better chip flow, great for grooving applications and can reduce the tool grinding cost and improve the cutting efficiency..
  • ♥ Tin coated universal grade is suitable for steel and cast steel continuous cutting and interrupted cutting finishing to roughing. Also enhanced the surface gloss of the cutting pieces..
  • ♥TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and that are made to your exacting specifications. We will provide you 100% satisfaction guarantee..
Check Stock

Aloris Tool AXA-1S Oversized Turning and Facing Holder

  • OSCARBIDE 3/4" Heavy-Duty Lathe Turning tool set include 1pcs each of SCLCR,SCLCL,SDJCR,SDNCN,SWGCR external turning tools holder, 1 pcs MGEHR grooving tool holder, 1 pcs SER threading tool holder.
  • Turning lathes Holders are made of high quality steel with Nickel Cotated, inserts are made of carbide with Tin-coated, moistureproof, dust-proof,for long time use.
  • Used for semi-finishing/roughing steel,metal,Fit for Turning,grooving or threading.
  • Replacement cutter of this kit , please search the Asin of this item: B07R9ZXG5J on Amazon to buy it..
  • 7pcs lathe cutting holders with 2pcs of keys packed in a premuim aluminium carrying case,easy to carry.
Check Stock

Lathe Grooving Blade, Lathe Turning Inserts CNC Grooving Cutting Tool (MGMN 150-PCD)

  • MULTIPLE USES: lathe Grooving Inserts can meet a variety of cutting requirements, such as cutting aluminum, copper and its cemented carbide, non-ferrous metals and some non-metals..
  • MATERIAL: CNC lathe Grooving Inserts are made of high-quality diamond materials, with high hardness, high impact resistance, high heat resistance, etc. The Grooving Inserts is not easy to break ..
  • SERVICE LIFE: Due to the high wear resistance and durability of lathe Grooving Inserts, its service life is longer than that of grooved inserts made of general materials, and it is more cost-effective..
  • PRODUCT DESIGN: CNC lathe Grooving Inserts adopts a reasonable and professional design, and the size is also very standard, so the product is stable and reliable in the processing process and has good processing performance..
  • QUALITY ASSURANCE: lathe Grooving Inserts are manufactured through strict standard procedures, and the product quality is qualified. If you have any after-sales problems, please contact customer service and we will deal with it in time..
Check Stock