Reviews Internal Drive Bracket

OSTENT 2.5 HDD Hard Disk Drive Mounting Bracket Caddy Compatible for PS3 Super Slim CECH-4x Series

  • PS3 Hard Disk Drive Mounting Bracket with screws.
  • Mounting Bracket for 2.5 inch (6.35 cm) internal.
  • Hard Disk Drive for your PS3 Mounting Bracket for internal Hard Disk Drive.
  • Compatible with the PS3 (CECH-400x series) 12GB model upgrade your PS3 to a larger hard drive today..
  • Package includes: 1 X HDD Mounting Bracket.
Check Stock

SSD Mounting Bracket, SNANSHI 2.5 to 3.5 Hard Drive Adapter SSD HDD Metal Mounting Bracket Adapter Hard Drive Holder for PC SSD (Pack of 2)

  • 2.5 to 3.5 Adapter: Hard drive mounting kit supports installing a 2. 5” hard Drive into a 3. 5” internal Hard Drive slot. The mounting fit all 2. 5” SSDs and HDDs.
  • Quality Selection: SSD adapter 2.5 to 3.5 made of durable metal alloy, can help heat dissipation and would not easily get out of shape, protecting your hard disk effectively.
  • Easy installation: ssd bracket 2.5 to 3.5 a complete set of tools needed for installation ( screws) is packaged. You can easily utilize unused hard drives to extend capacity of your computer by following simple steps.
  • SSD Bracket:Fits in any form factor desktop computer case with at least one standard 3.5" internal drive bay.
  • Package Included: 2Pack 3.5 to 2.5 adapter, 16 x Mounting Screws.
Check Stock

SSD Bracket 2.5 to 3.5 Adapter 2Pack, Hftywy SSD Mounting Bracket Kit 2.5 to 3.5 SSD HDD Hard Disk Drive Bays Holder Metal Mounting Bracket Adapter with Screws for PC SSD

  • ★ 2.5 to 3.5 Hard Drive Adapter SSD Bracket Converts 2.5" Notebook Hard Drive to 3.5" Desktop Hard Drive Bay Mounting Bracket Adapter.
  • ★Precise Fit- 4 screw holes are designed on the Mounting Adapter Bracket, which precisely corresponds to the 4 screw holes on the hard drive..
  • ★Specifically designed for SSD drives. Optimise your PC performance and make the most of the internal space inside your PC..
  • ★Using precision die stamping, great assemblability, easy to install. 2mm thickened metal, non-defrmation, rapid cooling, to protect your SSD HDD up to the hilt..
  • ★Package includes 2Pack of Hard Drive Holder, and 1 x screw driver and all screws needed..
Check Stock

EVAR V8 Engine Model Kit That Works for Adults, V8 Engine Internal Combustion Engine Model DIY Assembly Kit for AX90104 SCX10 Capra VS4-10 Pro/Ultra Model Car

  • Design: V8 internal combustion engine structure and principle design, pulley winding drive structure, generator, air conditioning compressor, steering pump, water pump, complete output flywheel and layered cylinder head, cylinder head cover, screw near and far valve intake manifold, oil pan structure, power drive plate plug interface..
  • Performance: based on pre colored products, users need to install. The V8 engine model can simulate electric operation. At the same time, considering the stability and reliability of operation, we made a full bearing structure of the drive part in a small space..
  • Application: Analog V8 engine is applicable to many RC models, such as AX90104, SCX10, Capra, VS4-10 Pro/Ultra. Installing this engine will make your remote control car unique and powerful, but it is also a good decoration, which can exercise the ability to assemble and restore the V8 engine..
  • Tip: This engine kit does not include a bracket. You can select the corresponding engine bracket according to your model. The engine and bracket are sold at the same time..
Check Stock

Mini V8 Engine Model Kit That Works Run, STEM Hobby Toy Building Kit for Kids & Adults with DIY Guide & Realistic Parts, for AX90104, SCX10, Capra, VS4-10 Pro/Ultra Model Car

  • Mini Engine Model Toys: Kids DIY Toy V8 Combustion Engine Models Kit That Works! This mini replica of a classic four-cycle 8-cylinder internal combustion gasoline car engine teaches young minds all about the wonderful world of mechanical engineering in one immersive set that makes the perfect hobbies gift set for adults or kids..
  • Simulation Metal Engine: V8 internal combustion engine structural principle design, drive structure of belt wheel winding, generator, air conditioning compressor, steering pump, water pump, complete output flywheel and layered cylinder head, cylinder head cover, spiral near and far valve intake manifold, oil pan structure, and power supply drive board plug interface..
  • Model That Works: Deliver the action of a classic car engine thanks to the powerful pistons and interactive cables! Simply plug the cables into the battery pack distributor and watch the engine fans turn around with real engine sounds..
  • Application: The simulated V8 engine is suitable for a variety of RC models such as AX90104, SCX10, Capra, and VS4-10 Pro/Ultra. Installing this engine will make your remote control car unique and powe....
Check Stock

2.5 to 3.5 Adapter, Inateck SSD Mounting Bracket with SATA Cables and SATA Power Cable, ST1004

  • 2.5 to 3.5 adapter: The hard drive mounting kit supports installation of one single 2. 5 hard Drive as well as two 2. 5 hard drives to a 3. 5" Internal Drive bay..
  • Convenient design: Dual form facilitates operation. Side wings are detachable, which can be detached when only one hard drive is mounted..
  • Complete kit: mounting tools are included. Two SATA III data cables are offered and both support a bandwidth of 6Gbps, backward compatible with SATA I/II. 2 power cables are also provided for power supply..
  • Side and bottom installation: supports installation from side or bottom. Screw holes are placed at the bottom of the bracket to better support hard drives..
  • Package Content: 1 x Mounting kit, 1 x screw driver, 16 x Screws, 1x 4 pin to Dual 15 pin SATA power cable, 1x 15 pin to Dual 15 pin SATA power cable, 2x SATA data cables, 1 x User Manual..
Check Stock

Hard Drive Tray for Dell OptiPlex 3040 5040 7040 MT Inspiron Vostro 3600 3650 Bay Caddy HDD 2.5 SSD Bracket X9FV3

  • Fits Dell Optiplex 3050, 5050, 7050, 9050 3060 5060 7060 MT, OptiPlex 3040, 5040, 7040 MT Inspiron Vostro 3600 3650 3668.
  • This is NOT a 3.5" to 2.5" adapter - fits a 2.5" SATA SSD/HDD to Dell 2.5" internal drive bays.
Check Stock

Pasow 2 Pack 2.5" to 3.5" SSD HDD Hard Disk Drive Bays Holder Metal Mounting Bracket Adapter for PC (Bracket)

  • 16pcs screws included for mounting the bracking onto the PC case.
  • Fit in any desktop computer or device with 3.5 inch internal drive bay..
  • 2.5″ To 3.5″ Mounting Adapter Bracket, Support 2.5″ hard drives (SSD and HDD).
  • Maximize the internal space of your computer case for efficient usage.
Check Stock

Oem For Dell Hard Drive OptiPlex 3040 5040 7040 MT Inspiron Vostro 3600 3650 Bay Caddy HDD 2.5 SSD Bracket X9FV3

  • Fits Dell Optiplex 3050, 5050, 7050, 9050 3060 5060 7060 MT, OptiPlex 3040, 5040, 7040 MT Inspiron Vostro 3600 3650 3668.
  • This is NOT a 3.5″ to 2.5″ adapter – fits a 2.5″ SATA SSD/HDD to Dell 2.5″ internal drive bays.
Check Stock

Club Clean Mounting Brackets Yamaha Drive Bracket

  • Specialty Bracket for Yamaha Drive 1 and Drive 2 model carts..
  • The Yamaha Bracket is a direct fit bracket for mounting your Club Clean Club & Ball Washer to either the driver or passenger side of your Yamaha Drive/Drive 2 model golf cart..
  • Powder coated steel ensures maximum durability and stability that will last for years to come..
Check Stock

PC Computer Screws Standoffs Set Kit, for Hard Drive Computer Case Motherboard Fan Power Graphics

  • ➤Material: High Quality brass and steel, which have superior rust resistance and the excellent of oxidation resistance, which can ensure long time using..
  • ➤ Size : Total 8 different computer pc screws, different screw can meet your different needs..
  • ➤ Personal Computer Screw Standoffs Set Kit for installing or repairing an internal CPU disk, motherboard, radiator, cooling fan, power tower, graphic card, hard drive, case, monitor, flat panel screen, or CD-ROM..
  • ➤Package includes: PC case screws, power supply, motherboard screws, hard drive screws, fan screws, brass bracket mounting screws and insulating washers.
  • ➤5pcs high quality #6-32x6mm Desktop Computer PC Case Chassis Thumb Screws M3.5 Tool-Less Adjustment.
Check Stock

SSD HDD Holder 2.5 to 3.5 Mounting Bracket Hard Drive Adapter 2 Pack Black

  • Support 2.5" HDD/SSD Mounting Adapter Bracket.
  • M3 + #6-32*6 screws included for mounting the bracking onto the PC case.
  • Fits in desktop PC case with standard 3.5" internal drive bay (all popular PC casings).
  • The best electing for DIY. 30 days product Replacement or Full Refund if you are not satisfied.
Check Stock

suiwotin 12PCS SSD Bracket 2.5 to 3.5 Adapter, SSD HDD Hard Disk Drive Bays Holder, SSD Mounting Bracket Kit Metal Mounting Bracket Adapter with Screwdriver and Screws

  • 【Package Includes】 -- 12 x Hard Drive Adapter SSD Bracket, (Mounting screws and screwdriver are includes)..
  • 【Premium Material】 -- Metal mounting adapter bracket is made of high quality material, non-defrmation, rapid cooling, to protect your SSD HDD up to the hilt..
  • 【Function】 -- SSD mounting bracket specifically designed for SSD drives. Optimise your PC performance and make the most of the internal space inside your PC, protecting your hard disk effectively..
  • 【Easy To Install】 -- With free mounting screws and screwdriver, using precision die stamping, great assemblability, easy to install and quick. works with HDD / SSD, compatible with SATAI SATAII SATAIII..
  • 【100% SATISFACTION GUARANTEED】-- If you don't absolutely love them let us know and we will refund your purchase price NO QUESTIONS ASKED! We are so confident you will love our products..
Check Stock