Reviews Intercooler Hose Pipe

Rev9 ICK-044 ICK-044 Front Mount Intercooler Conversion Kit, FMIC, compatible with Subaru Impreza WRX/WRX STI

  • This will fit: 2008 2009 2010 2011 2012 2013 Subaru WRX / 2008 -2013 STI (all turbo models) 7 x pieces polish aluminum pipe set up 7 x polyester reinforced High temperature silicone hose 1 x overflow reservoir 1 x reinforcement beam bracket 14 x T-Bolt Clamp 1 x Project intercooler.
  • INTERCOOLER SPECS: bar & plate design for better cooling efficiency max horsepower capacity: 400-500+hp core length: 25" core height: 9.5" core thickness: 3.5" inlet / outlet size: 2.5" end to end length: 35".
  • note: this intercooler fit both wrx and sti, so therefore there will be extra pipe left if you were to use it for the wrx, vice versa. but please keep the extra pipe if you are planning to use it or sell it to sti owners, vice versa. also if using this on sti, customer must us a different bov then stock, such as turbo xs..
  • note: this intercooler kit will retain the factory fog lights for both sti and wrx..
Check Stock

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Red)

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project.
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it.
  • 4.Made of stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance.
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps.
Check Stock

WATERWICH Universal 3' Inch Aluminum Intercooler Piping U-Pipe Kit with Coupler and T-Clamps (Blue)

  • 1.This 3" intercooler tube kit is universal,fits for all turbo car (modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite.
  • 2.Advantage: Reducing engine's inlet temperature to increase in horse power and turbo response and our kits will increase about 10-20 HPs. Perfect for Turbo DIY Project..
  • 3.Easy installation,Designed for vehicles with limited space,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 4.Made of high quality material , stainless tubular construction Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention,Direct Replace,Built to meet or exceed original equipment performance..
  • 5.Package Included: 2Pcs 3" Straight Pipes + 2Pcs 3" 45 Degree Pipe + 2Pcs 3" 90 Degree Pipes+2Pcs 3" 180 Degree U Pipes +2Pcs 3" 90 Degree Elbow Hose + 6PCS 3" Straight hose + 16Pcs 3" Stainless Steel T-Clamps..
Check Stock

28'x7'x2.5' Universal Turbo Intercooler with Front Mount Intercooler + 2.5' 12 Pcs Aluminum Bent Pipes + 8pcs Straight Couplers + 4pcs 90 Degrees Elbow Couplers + 24pcs T-Bolt Clamps

  • Ⓞ Made of High quality T-6061 Lightweight Aluminum Piping.
  • Ⓞ Increase 65% Air Flow comparing with other Standard Piping.
  • Ⓞ Package included: 12-Piece Piping Set Includes: 6 X 90 Degree Long-Pipe.
Check Stock

Vibrant Performance 2176 3\ Polished Aluminum 90 Degree Bend

  • Aluminum pipe Length: 600 mm.Thickness: 1.8 mm.Made of high quality T6061 Aluminum.Polished surface..
  • Silicone hose:Made of high quality silicone, 4-ply Nylon reinforcement,with enhanced strength and durability.Silicone hose Thickness: 5mm. Size tolerance:+/-0.5mm.
  • Silicone hose working Temperature:-76 °F (-60 °C ) to +500 °F (+260 °C), working Pressure:0.3 Mpa (43.5 PSI) to 0.9 Mpa (130.5 PSI)..
  • T bolt clamps: Made of high quality 301 stainless steel material.
  • Universal fitment, depending on the size of your Intercooler.
Check Stock

MooSun 2\ 8-Pcs Universal Intercooler Pipe Piping Turbo Polished Aluminum Kit with Silicone Hoses and Stainless Steel T-Clamps

  • Upgraded replacement - this turbocharger intercooler pipe kit features a metal tube to replace a failed plastic original component.
  • Complete kit - includes pipes and clamps needed for repair.
  • Application specific - made to replace the original intercooler hose on certain Ford Super Duty and Excursion model years.
  • Quality engineering - designed in the United States and backed by decades of automotive aftermarket experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

ACDelco Professional 26221 Molded Turbocharger Intercooler Hose with Clamps

  • Color: Silver Pipe & Black Silicone Boots.
  • Upgrade from factory plastic tube that explodes,Tuning is NOT required.
  • Aluminium CNC / Strong durable intercooler boot.
  • Pipe Diameter: 3" (Lower Section), Pipe Diameter: 3.5" (Upper Section), Silicone Boot 1: 3.
Check Stock

Universal 3' 3Inch 76mm Aluminum Turbo Intercooler Piping U-Pipe Kit Silicone Hose Kit with Coupler and T-Clamps DIY Kit

  • ▲ Pipe OD: 3", aluminum pipe length: 23.62" / 60cm, thickness: 1.8mm.
  • ▲ Silver aluminum pipe: total lenth=24" or 600mm.
  • ▲ Silicone hose: Made of high quality Silicone, 3-Ply reinforcement.
  • ▲ T bolt clamp: Made of high quality 301 Stainless steel material.
  • ▲ Universal fitment, depending on the size of your Intercooler.
Check Stock

Cold Side Intercooler Pipe with Boots Compatible with 2003-2007 Ford 6.0L Powerstroke Diesel

  • Ideal replacement - this intercooler hose matches the fit and function of the original equipment hose.
  • Greater durability - this intercooler hose ends are made of stainless steel instead of the original equipment plastic to better withstand high temperatures.
  • Complete repair solution - this intercooler hose includes new end clamps required to complete installation.
  • Quality tested - this part has undergone try-on and material testing to ensure a quality fit and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

ETL INDUSTRIES 2" ID, 36" Length Straight Silicone Pipe Hose, Universal 4-Ply Reinforced Radiator Hoses Silicone Long Pipes for Intake Turbo Intercooler

  • Size: Silicone pipe diameter: 2" (51mm). Length: 36''(914mm)..
  • Material: The Silicone radiator hose is made of 4-Ply reinforced high-quality polyester and pure silicone material for superior performance, high-temperature resistance, and long service life..
  • Temperature/Pressure Resistance: Long silicone hoses working temperature is -60 ~ 350 degrees, and burst pressure is 140 PSI..
  • Application: Universal 2" black silicone hose is suitable for exhaust systems or industrial technology, such as commercial trucks and buses, turbocharger, intake intercooler pipe, turbo diesel engines, etc..
  • After-Sales Service: 24-hour service and 1-year warranty from ETL INDUSTRIES. (Parts installation help, replacement, etc). Note: Please check the size carefully before ordering..
Check Stock

2.25inch 57mm ID Straight Silicone Hose Coupler, Turbo Intake Pipe High Temp 3-Ply Reinforced 76mm Length (Black, 57mm)

  • It provides the required performance, reliability, strength and flexibility, improves the flow and performance of the engine cooling system.
  • Application: Cooling connector, Engine Cooling Hose, Intercooler Coupler Pipe, Basic replacement, Custom , Supercharger chargepiping set up, custom compressor, inlet for charged and supercharged car etc.
  • Package Content :1 x Straight Silicone Hose.
Check Stock

BOXI Turbocharger Intercooler Hose Assembly For 2003 2004 2005 2006 Dod-ge Sprinter 2500 3500/2002 2003 2004 2005 2006 Mercedes-Benz Sprinter 2500 3500 2.7 L5 DIESEL / 26272 5120147AA

  • This Gates Turbocharger Intercooler Hose is compatible with Dodge Sprinter 2500 2006, 2005, 2004, 2003 2.7L L5 (Intercooler to Engine Cold Side ) and is perfect for a tune up or performance upgrade..
  • ENHANCE PERFORMANCE: The Gates Turbocharger Intercooler Hose features a high-quality silicone cover for extreme temperature resistance in high-temperature conditions. The Gates Turbocharger Intercooler Hose has all the parts including turbocharger hose and 2 correctly fitted T-bolt clamps (where shown) needed to complete your repair.
  • MAXIMIZE SERVICE LIFE: Manufactured with multiple layers of reinforcement, the Gates Turbocharger Hose showcases a specially formulated fluoro-elastomer liner that prevents oil permeation while the T-bolt clamps with stainless steel band and bridge both resist corrosion and provide higher torque for optimal sealing. Built to last, Gates manufactures OE-quality hose solutions that comply with SAEJ2050 specifications to help minimize maintenance.
  • RELY ON QUALITY BELTS AND HOSES: In the most extreme environments and those more familiar, Gates is there with the right product, in the right place, at the right time. Whether building original equipment or maintaining products in the aftermarket, they enable their customers to be ....
Check Stock

28' x 7' x 2.5' Universal Turbo Intercooler Kit with Intercooler + 8pcs Bent Pipes + 6pcs Straight Couplers + 2pcs 90 Degrees Elbow Couplers + 16pcs Clamps Black (8Pcs Black)

  • This 2.5 Inch intercooler tube kit is universal,fits for all the turbo car's upgrade and replacement(modification required). The pipe kit is largely used for automobile refitting the turbocharger cooling inter-cooled device pipe of the suite and admission line..
  • 2.5" piping diameter, Increase 65% air flow and engine displacement,and can greatly increase engine power and torque comparing with other standard piping..
  • Solid all-welded construction for maximum strength and safety. Not easy to crack or break. This polished surface intercooler pipe kit is protected with anodized aluminum of waterproof and rust prevention..
  • Quick installation,easy slip-on. Direct replace your original damaged or rusted one. You may require to modify it..
  • 【8-Piece Piping Set Includes】:1 x 28"x7"x 2.5" Intercooler.
Check Stock