Reviews Integral Lock

AEM (30-3300) V2 1-Gallon Water/Methanol Injection Kit with Internal MAP Sensor

• Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
• Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid.
• Internally-bypassed water/methanol injection pump does not cycle on/off and provides quiet, smooth operation.
• it features robust construction including integral hose fittings.
• Three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min) 1 gallon tank with integral conductive low-fluid sensor and positive lock connector.

Ingersoll Rand 308B Air Straight Die Grinder, 1/4\

• POWER: Motor delivers 0.33 HP (0.25 kW) and 25,000 rpm free speed..
• Piped Away Exhaust Ready: These die grinders are compatible with “piped away” exhaust kits, so you can transfer exhaust away from you and your workspace..
• DURABLE: Ball-bearing construction improves balance, reduces vibration, and ensures a longer life.
• RELIABILITY: Integral safety-lock throttle lever prevents accidental start up..
• LIGHTWEIGHT: At only 1lb., the ergonomic composite housing protects this tool from cold air and offers greater operator comfort..
• Built-in lubricating wick increases angle gear life.
• Rear exhaust directs air away from the operator.
• Powerful motor delivers 0.33 HP (0.25 kW) and 25,000 rpm free speed.
• Durable ball-bearing construction improves balance, reduces vibration, and ensures a longer life.
• Strong aluminum housing withstands tough operating conditions.
• Small and lightweight design provides easy operation greater access to tight spots.
• Easy-to-use, integral safety-lock throttle lever prevents accidental start up.

AEM (30-3302) V2 Water/Methanol Injection Kit with Internal MAP Sensor

• Boost Dependent controller features on-board MAP sensor with large adjustment knobs, integrated plug for harness connection, integrated fuse, covered status light and test button for enhanced splash resistance and mounting tabs.
• Wiring harness is terminated with a positive-lock connector on one end with color-coded wires to ease installation, power and ground wires for the pump and additional wire for optional on/off fluid solenoid.
• Pump does not cycle on/off and provides quiet, smooth operation.
• it features robust construction including integral hose fittings, EPDM seals and a Santoprene diaphragm that provides consistent and reliable fluid delivery.
• Precision-machined billet-aluminum injector with integral check valve.
• three interchangeable injector nozzles to cover a wide variety of HP levels (250cc/min, 500cc/min and 1,000cc/min).
• tank-less 35 PSI Boost dependent gas water/methanol system.

Cold Steel 40A Click N Cut Folder 2.5 in Blade ABS Handle, One Size

• Super strong interchangeable blade utility knife built for hard work and strenuous cutting chores.
• Blades are double the thickness of most blades on the market, so they can stand up to the most strenuous cutting tasks you can imagine.
• Exchanging a blade is easy and is similar to the release on a folding knife.
• Simply press the lock bar and the blade slides easily out, keep the lock bar pressed and slide a new blade in and release the lock bar and the blade will “click” into place.
• Blade lock features elements that are based on our extremely strong Tri-Ad lock to ensure extra strength and durability for tough cutting jobs.
• Includes 3 blades: 1 drop point blade, 1 plain edge utility blade, 1 serrated utility blade.
• Includes a durable Secure-Ex belt sheath that holds the knife with one of the blades installed and has integral pockets for the two uninstalled blades.

DEWALT Router, Plunge Base, 10-Amp, 2 HP (DW621)

• DEWALT router features full-wave electronic variable speed motor with soft start runs at 8,000-24,000 rpm with constant speed under load to ensure a quality finish in all materials.
• Rack and pinion depth adjuster with micro-fine adjusting allows quick, accurate set-up for DEWALT plunge router.
• Integral dust collection system efficiently removes chips and provides superior bit visibility.
• Spindle lock button allows for single-wrench bit changes.
• Innovative rubber-coated knobs have plunge-lock and on/off built-in for maximum user control.

Spyderco Pochi Folding Knife with Stainless Steel Blade with Titanium Handle - PlainEdge - C256TIP

• One of a Kind -Japanese knifemaker Kazuyuki Sakurai specializes in folding knives, many of which are inspired by the shapes of animals. The Pochi....
• Easy-to-Use Lock - One of the key features a R.I.L. lock that uses a lock bar that is integral to one of the handle scales. It locks the blade firmly....
• Superior Blade Steel - The Pochi comes with a hollow-ground CPM S45VN blade. CPM S45VN is a martensitic stainless steel and its composition offers a....
• Durable - At a handle length of 2.60", the Pochi has a bead-blasted titanium handle for durability..
• Pocket-Friendly - The Pochi has a blue-anodized folding "tail", titanium pocket clip, and pivot-pin accent..

UTG Rubber Armored Full Metal QD Bipod, Height 6.0"- 8.5", Black

• Protective rubber armored legs stands up to the Harshest of environments.
• Durable heavy-duty full metal construction for added dependability.
• Integral Picatinny quick Detach lever lock mounting base with option swivel stud mount adaptor included.

Covidien 6DIC Shiley Disposable Inner Cannula for 6DCT, 6FEN, 6DCFS and 6DCFN Tubes, Size 6 (Pack of 10)

Covidien 8DIC Shiley Disposable Inner Cannula for 8DCT, 8DFEN, 8DCFS and 8DCFN Tubes, Size 8 (Pack of 10)

Covidien 4DIC Shiley Disposable Inner Cannula for 4DCT, 4DFEN, 4DCFS and 4DCFN Tubes, Size 4 (Pack of 10)

Value Plastic SMTLL-J1A Luer Tube Fitting Threaded Adapter Male Luer Integral Lock Ring X 1/4-28 UNF Thread, Natural Kynar PVDF (pack of 25)

• Coupler with angled barbs for connecting pipes or tubing in a straight run.
• Fitting has a male luer lock on one end and a barbed connector on the other.
• Polypropylene for chemical resistance and dimensional stability.
• Luer lock with integral ring for secured, leak-free connection.
• Barb lacks parting lines, ensuring a leak-free union with tubing.
• Meets ROHS standards for quality assurance.

Intermatic LC4521C 120-Volt Locking Type Thermal Photocontrol

• Locking style thermal photocontrol provides dusk-to-dawn ON/OFF control of exterior lighting, street lighting, parking lot, pedestrian pathway and....
• Delay feature prevents unwanted OFF switching of lights due to passing car headlights or lightning.
• Twist lock plug for quick installation and changeover features integral high-impact thermoplastic housing.
• Features a cadmium sulfide photocell and a mechanical bimetal switch.

Sparwod Tactical 1

• Angled Offset Mount:New gen tactical flashlight ring with 45 degree offset angle for optimal low profile center bore alignment..
• Easy to Install:Integral max strength twist-lock offset rail mount for mounting flashlights to rail equipped rifles or shotguns..
• Fit all 30mm Mountable accessories:Mounts to any standard weaver or picatinny rail, with the flashlight offset to the side..
• Size Details:25.4mm (1 inch) ring diameter,mount is 1" In diameter, 1.8" In length, 1.6" In height, and 1.6 ounces in weight..
• Durable Material:Light crafted from high quality&lightweight precision machined aluminum,with anodized black matte finish..