Reviews Integra Sedan Exhaust

WATERWICH Compatible with Catalytic Converter Nissan Altima 2.5L Sedan 2002 2003 2004 2005 2006 Direct-Fit Stainless Steel High Flow EPA Compliant

  • [ COMPATIBLE VEHICLES] - Compatible with Nissan Altima Base Sedan 4-Door 2.5L 2002-2006(Except 2005).
  • Compatible with Nissan Altima S Sedan 4-Door....
  • [ Direct Fit Design] - Flange to Flange Design, Direct Fit Design Bolts to Existing Exhaust without doing extra modification. And comes with gasket....
  • [Designed] - This is new OE fit catalytic converter. Outer shell Made from heavy-duty stainless steel construction for maximum durability. The....
  • [FUNCTION] - It is installed in the exhaust pipe of the engine. Through oxidation reaction, reduction reaction, water-based gas reaction and water....
  • [NOTE ] - Federal EPA compliant Appproved, Not for CA&NY(Non CARB compliant, Not legal for use on vehicles required to meet California emission....
Check Stock

PARTS-DIYER Rear Catalytic Converter Exhaust Manifold Flex Pipe Replacement for 2004-2006 Nissan Maxima 2004-2009 Nissan Quest 3.5L 54686

  • [FITMENT] - Catalytic Converter compatible with 2004 Nissan Maxima Sedan Auto Trans, 2005 -2006 Maxima Sedan Auto Trans & 5 Speed Trans, 2004-2009 Nissan Quest Passenger Van 5-Speed Trans.
  • [INTERCHANGE PART NUMBER] - 54686, 54478, 40553, 0991402, 58336, 18316.
  • [FUNCTION] - It is installed in the exhaust pipe of the engine. Through oxidation reaction, reduction reaction, water-based gas reaction and water vapor modification reaction, the three harmful exhaust gases CO, HC and NOx emitted by the engine are converted into harmless water, carbon dioxide and nitrogen, so it is also called the three-way (effect) catalytic converter..
  • [NOTE] - Not available to New York and California.
  • [MAKE IT SURE] - Using the Drop-down menu at the top, you can see if this part is compatible with your vehicle.
Check Stock

4 Inches Round Muffler Tip Catback Exhaust System Compatible with Acura Integra RS GS LS 94-01 Stainless Steel

  • ▶️ This catback is compatible with 94-01 Acura Integra, does NOT fit GS-R / Type R models.
  • ▶️ Aggressive deep and smooth tone sound while ensures smooth exhaust gas flow.
  • Dyno proven to instantly increases 15-25 horsepower or low end....
  • ▶️ Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • ▶️ Easy to intall, direct bolt-on. No drilling or modifications needed for installation. Gaskets and hardware are Included.
  • ▶️ Muffler Tip Type: Rounded Tip | Muffler Exhaust Tip Diameter: 4" | Inlet Size: 2.25".
Check Stock

S SIZVER Weld-On Muffler Series 4" Carbon Fiber Slant Tip 3" Inlet+Silencer

  • 【FITMENT】Compatible with 92-00 Honda Civic Coupe/Sedan.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
  • 【Long Term Durability】TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..
Check Stock

DNA Motoring COIL-HC88-T44-BK Suspension Coilover Sleeve Kit [For 88-01 Honda Civic Del Sol CRX Acura Integra]

  • Compatible With Acura Integra Coupe / Sedan (DB/DC) 1994 1995 1996 1997 1998 1999 2000 20001.
  • Spring Rate (Front/Rear) : 10 kg/mm (560 lbs/inch)/8 kg/mm (448 lbs/inch).
  • Specially Designed Coil Springs Over Shock Kit To Lower The Vehicle Proper Way.
  • Mono Tube Shock With Steel Alloy Body And Valving Allows 32 Clicks Rebound Force Adjustment.
  • Independent Spring Tension And Ride Height Settings To Allow Stiffness And Ride Height To Be Adjusted Separately.
  • These Coilovers are “Lowering Kit” and DOES NOT adjust to Factory Ride Height. No Installation Instructions.
  • Install By Experienced Professionals Recommended.
Check Stock

Truck Exhaust Kits - Shop Line dual exhaust system 2.5 AL pipe 2 chamber Muffler 2.5" Black Slash Cut Weld on Tip

  • Vehicle Compatibility - This cat-back exhaust is compatible with Honda Civic Coupe Sedan 1992-1995, Honda Civic EX 1996-2000, does NOT fit hatchback models..
  • Brilliant Performance - Come with [1] high performance racing design exit cat-back exhaust kit, can increase 15 to 25 horsepower instantly or low end torque and maximize to enhance the exhaust gas flow without sacrificing the aggressive tone sound in the smooth conditions..
  • Extraordinary Quality - It is constructed of high quality aluminized steel with computerized mandrel-bends for the strength and durability, and the TIG welded CNC machine can resistant against pressure and corrosion..
  • Simple Installation - Easy for the installation, make you enjoy the best performance in the fastest time..
  • Product Specification - Major Piping: 2.5" OD | Muffler Exhaust Tip (Removable Silencer Included): 4.5" OD | Inlet: 2.25" OD | Muffler Tip Type: Round.
Check Stock

Fit 1994-2001 Acura Integra GSR Hatchback Model Only 2.5 Inch Stainless Steel Catback Exhaust System 4.5 Inch Muffler Burned Tip

  • Fit 1994-2001 Acura Integra (GSR Hatchback Model Only).
  • Fully Mandrel bent , Burnt Tip Exhaust, Comes with removable silencer.
  • Tip Diameter: 4.5" Inch Piping Diameter: 2.5 Inch.
Check Stock

DNJ VG534 Valve Guide for 2009-2013 / Suzuki/Grand Vitara, Kizashi / 2.4L / DOHC / L4 / 16V / 146cid, 2393cc / J24B / VIN 0, VIN 9

  • THIS IS BRAND NEW: DNJ® Exhaust Valve Guide.
  • FITS: 86-01 Acura, Honda / Integra, CR-V, Prelude 1.6L-2.1L L4 DOHC Naturally Aspirated B18B1,B20Z2,B20B4,B18A1,B21A1,B20A5,D16A1.
  • FITMENT NOTES: 6.7mm I.D., 12.2mm O.D., 50.2mm O.A.L., Exhaust.
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks..
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.
Check Stock

DNJ EV3165 Exhaust Valve for 1997-2015 / Buick, Cadillac, Chevrolet, GMC/Ascender, Avalanche, Camaro, Canyon, Colorado, Corvette, CTS, Escalade, Impala, Silverado, Yukon/ 4.8L-6.0L / OHV

  • FITS: 96-01 Acura, Honda / Integra, CR-V 1.8L-2.0L L4 DOHC Naturally Aspirated B18B1,B20Z2,B20B4.
  • FITMENT NOTES: Nitride Coated, 1 Groove, 28mm Head Dia., 6.6mm Stem Dia., 105.9mm O.A.L., Exhaust.
  • DNJ Engine Components is a full line provider of Domestic & Japanese engine parts for cars and trucks..
  • We carefully selected DNJ Engine Components as the sole provider. DNJ has a 30+ year track record of quality, experience, and trust. It makes sense for us to carry a brand that would help us earn customer loyalty in the long run.
Check Stock

Detroit Axle - Rear Drilled and Slotted Disc Brake Kit Rotors w/Ceramic Pads & Brake Kit Replacement for 1998-2002 Honda Accord V6 - [04-05 Civic Si] - 02-06 Acura RSX - [97-01 Integra]

  • Replacement for 1997-2001 Acura Integra (Type R Models) - [2002-2006 Acura RSX] - 1998-2002 Honda Accord (V6 Coupe Models) - [1998-2002 Honda Accord (V6 Sedan Models)] - 2004-2005 Honda Civic (Si Hatchback Models).
  • Drilled & Slotted Disc Brake Rotors (Up To 20% Better Braking Power than Standard Rotors ) - Zinc Dichromate Plating (Rust Protection).
  • Authentic 100% Ceramic Brake Pads (With 0% Metallic Composition) - Installation Hardware Included.
  • Please check the compatibility and the view notes before purchasing the item, make sure it fits your vheicle.
Check Stock

iJDMTOY Smoked Lens Amber Full LED Fender Side Marker Light Kit Compatible With JDM Spec Honda/Acura RSX Integra Civic EP3 Replace OEM Amber Sidemarker Lamps

  • Compatible with JDM Honda Acura 2002-2006 RSX Integra DC5 TypeR, 2002-2005 Civic EP3 TypeR or SI Hatchback, 2001-2005 Civic ES/EM Coupe/Sedan, 2003-2007 Accord, 2002-2016 Jazz FIT.
  • Includes one pair (driver and passenger sides) dark smoked cover lens full amber LED front bumper side marker lamps.
  • Each piece is powered high power amber SMD LED diodes to form a perfect focal strip with a super bright lighting output.
  • Direct plug and play installation to give your vehicle a modern and dynamic LED appearance with enhanced safety & visibility at night!.
Check Stock

CURT 55513 Vehicle-Side Custom 4-Pin Trailer Wiring Harness, Select Toyota Tacoma, T100, Hilux , Black

  • EASY TO INSTALL. No cutting! No splicing! This trailer wiring harness kit plugs into existing factory wiring on your vehicle and equips it with a standard, rear 4-pin trailer wiring connector for plugging in and towing a trailer.
  • STANDARD CONNECTOR. This plug-in 4-flat trailer wiring can be used to connect trailer tail lights, brake signal lights and turn signals. 4-way trailer light wiring is popular on a variety of trailers, adding versatile towing options for your vehicle.
  • VEHICLE-SPECIFIC. This aftermarket, vehicle-trailer wiring harness is designed for select years of the Honda Civic sedan, Honda Fit, Honda Accord without LED taillights, Mazda 3, Mazda CX 5 and Mitsubishi Galant sedan, 2.4L, single exhaust.
  • RELIABLE POWER. This 4-way trailer wiring harness is built with surface mount technology. This type of circuitry generates less heat, optimal light intensity and durable performance.
  • DUST COVER. To promote long-lasting use and weather resistance, this 4-pole trailer lighting wire harness comes with a rubber dust cover. It easily fits onto the 4-way flat connector when not in use, protecting it against the outdoor elements.
Check Stock

Fel-Pro-MS94602 Exhaust Manifold Gasket Set

  • 【FITMENT】Compatible with 92-00 Honda Civic Coupe/Sedan.
  • 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth....
  • 【Long Term Durability】TIG welded CNC machine flange for resistance against pressure and corrosion..
  • 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on....
Check Stock