Reviews Insulation Cylinder

Dial Indicator Bore Gage 2' - 6' Range 0.001' Precision, Industrial Deep Engine Cylinder Measuring Tool with Carbide Anvils and Jewel Bearing, Silver Grey

  • Precise Measurement: The measuring range of cylinder dial bore gauge is 2″-6″, the accuracy is 0.001″.
  • High Accuracy Industrial Measurement: Users can measure cylinder out-of-roundness and taper without removing the piston with bore measurements up to 10″ deep – this diameter gauge can reach critical wear areas of the cylinder.
  • Sturdy and Wear-Resistant: The engine cylinder measuring tool is made of stainless steel, the measuring plunger contains a carbide tip, and the dial contains gem bearings, which effectively improves the durability of the cylinder inner diameter dial indicator.
  • High-Quality Probe: Sealed probe, glass mirror cover, waterproof and dustproof, insulated grip, effective heat insulation, clear scale, allowing you to see the data more intuitively.
  • Package: Contains all necessary spacers, interchangeable extensions and ABS storage case, easy to use and easy to assemble. If you encounter any problems during the use of our dial indicator bore gage, please feel free to contact us, we will solve the problem perfectly for you.
Check Stock

5 Gallon Bubble Magic Washing Machine + Ice Hash Extraction 5 Bags Kit

  • The machine is made of 6061 aluminum, 4-piece of chrome steel and 12 ton hydraulic cylinder..
  • Dual heating rods for each 4x7" heated platen - 300 watts per rod, 1,200 watts in total..
  • Recommend pairing it with 12 ton hydraulic hand pump (dp-cp590g) or other pump with NPT 1/4" male coupler..
  • Both PID temp controller and hydraulic cylinder allow replacing for a long service life..
  • Dual 15mm thick insulation wood to protect the equipment from overheating..
Check Stock

uxcell 12mm Inner Dia H13*D18 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts

  • Inner Diameter: 12mm/0.47 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 18mm/0.71 inch, Cylinder Height: 10mm/0.39 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 26mm/1.02 inch,2 x M4 Fastening Screws.
  • Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
  • Material: Iron Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
  • Package: 2 x 12mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
Check Stock

uxcell 8mm Inner Dia H13*D16 Rigid Flange Coupling Motor Guide Shaft Coupler Motor Connector 2PCS for DIY Parts

  • Inner Diameter: 8mm/0.31 inch, Total Height: 13mm/0.51 inch, Cylinder Outer Diameter: 16mm/0.63 inch, Cylinder Height: 10mm/1.31 inch, Base Diameter: 32mm/1.26 inch, Base Height: 3mm/0.12 inch, Mounting Hole Distance: 24mm/0.94 inch,2 x M4 Fastening Screws.
  • Type: Flange Shaft Coupling, suitable for model shaft connection, perfect accessories for RC Model motor, etc..
  • Material: Aluminum Alloy, hardened by heat treatment, and then electroplated. Durable and insulation, make your shaft more stable, easy to install and replace..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily. Double connection points fasten the coupler tightly..
  • Package: 2 x 8mm Flange Shaft Coupling, 4 x Fastening Screw( M4 Hex Wrench Not Included Here ).
Check Stock

2 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver. (2 pcs 8mm)

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 32mm. Base Height: 2mm..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【Package Include】Ancirs flange coupler is packaged with 2 pack 8mm Flange Shaft Coupling + 2x M3 Mini Hex Wrench + 4 x M3 Fastening Screw..
Check Stock

AC 250V 60uF 50/60HZ Cylinder Shaped Run Round Capacitor CBB60 for Motor Cool Heat Pump Washing Machine

  • STURDY & DURABLE -- High quality material and cylinder shape improves performance of the product and makes it durable, A capacitor is an electric component that temporarily stores an electrical charge..
  • RELIABLE ELETRICAL -- Reliable insulation performance, excellent electrical properties and safe explosion-proof devices, Round capacitor can be used to substitute oval shape one with the same MFD AND Volt specs..
  • SUPER PERFORMANCE -- Heat resisting, low leakage, low loss and low impedance, Round cylinder-shaped dual run capacitors are commonly used for air conditioning, to help in the starting of the compressor and the condenser fan motor..
  • STRONG OVERLOAD -- Current with good impact resistance, strong overload ability, A motor acts like a transformer with the run winding acting as the primary and the start winding acting as the secondary..
  • WIDE APPLICATION -- Suitable for the start-up of motors with frequency of 50Hz and 60Hz, such as washer, pump and motors, Built to the toughest standards for AC motor run capacitors..
Check Stock

4 Pack 8mm Flange Coupling Connector, Rigid Guide Steel Model Coupler Accessory, Shaft Axis Fittings for DIY RC Model Motors, High Hardness Coupling Connector-Silver.

  • 【Durable Material】 Ancirs coupling connector is made of fine plating steel, heat and electroplated process make it sturdiness and insulation, striking shaft more stable and easy for installment and replacement..
  • 【Wide Range of Use】Ancirs flange coupler is produced based on International Flange Standard, widely used in model shaft connection, perfect accessories for RC Model motor..
  • 【High cost performance】Ancirs flange coupler is packaged with 4 pack 8mm Flange Shaft Coupling + 4x M3 Mini Hex Wrench + 8 x M3 Fastening Screw..
  • 【Standard Specification】Inner Diameter: 8mm. Cylinder Outer Diameter: 10mm. Cylinder Height: 10mm. Base Diameter: 22mm. Base Height: 2mm..
  • 【100% Satisfaction Guarantee】 If you are not completely satisfied with ANCIRS Flange Coupling Connector, just contact us through Amazon message and we will provide feasible solution for you as promised..
Check Stock

AEROPRO TOOLS Roofing Nailer 15 Degree Coil Roofing Nails 3/4-Inch up to 1-3/4-Inch CN45RC

  • POWER: Cylinder valve Drive for rapid response.
  • Tool free adjustable depth of drive for various shingle size.
  • FASTENERS: Drives 15º full round head nails from 3/4-Inch to 1-3/4-Inch length.
  • Contact actuation and sequential models are provided.
  • Designed for Roofing,Insulation board,Vapor barrier installation, Vinyl siding,Fiber cement applications..
Check Stock

Reed Switch Developments Corp, 2250-1965-10K, Magnetic Reed Sensor + Actuator Kit, Plastic, SPST - Form A, 40W 400V 2A, Qty: 1 Kit

  • Celanex Plastic Case, Threaded Cylinder, 5/16-24 Threads, 2 Nylon Jam Nuts Included.
  • 6" standard leads, 24 AWG, PVC insulation, 105° Celsius, UL 1007/1569, CSA type TR-64.
  • Recognized to US (UL) and Canadian (cUL) requirements under the Component Recognition Program of Underwriters Laboratories Inc. - UL File #: E102207.
  • Each Kit Contains: 1 Switch/Sensor and 1 Actuator.
Check Stock

Freeman PFS16 Pneumatic 16 Gauge 1\ Fencing Stapler

  • Designed for livestock fencing, pet enclosures, vineyard trellising, snow control fencing, electrified single wire with insulation, and other mesh and woven applications.
  • Compatible with 16 gauge fencing staples from 3/4" to 1".
  • Quick jam release allows for easy access to the drive blade in the case of a jammed fastener.
  • Easy to load magazine features a simple pull-back pusher.
  • One piece drive blade for increased durability extends the life of the tool.
  • Anodized aluminum cylinder and magazine provides a rugged lightweight tool great for extended use.
  • Tool-free finger depth adjust for various applications.
  • Comfort grip handle reduces vibrations and impact, increasing control and accuracy.
  • 360 degree adjustable exhaust allows user to easily direct air away from face.
  • Includes belt hook, air tool oil, and adjustment tools.
Check Stock

EliteShade USA sunumbrella 11Ft 3 Tiers Market Umbrella Patio Outdoor Cylinder Auto Push-up Table Umbrella with Ventilation and 5 Years Non-Fading Top,Heather Beige

  • Three tiers design: Hot air or wind will flow through the multiple vents quickly which can make your umbrella more stable against windy condition and cooler underneath..
  • 100% Non-fading Acrylic Performance Fabric: 100% solution-dyed acrylic, 5 years non-fading top, water resistance and oil resistance. Ordinary market and patio umbrella will fade in one month, while EliteShade patio umbrella is fadeproof..
  • Sun Protection: High-quality 260 GSM impermeable fabric shows effective in heat insulation in sunlight exposure and protects the people tanning and burning..
  • Full Aluminum Umbrella Frame: Rust Free Brown Powder Coated with 8 Ribs. EliteShade patio umbrella is 20% stronger than most of patio umbrellas in the market. The 11ft Patio umbrella comes with 1.8 inches diameter aluminum pole which provides stronger support than standard round poles..
  • Pull Pin System: EliteShade patio umbrella is easy to open and close with the pull pin. This 11ft umbrella with the cylinder has been improved to omit the step of handling the crank. Pull the pin, the cylinder helps the umbrella to rise automatically, and you only need to lift the umbrella rib to make it snap to the fixed-position. When you want to close the umbrella, just pull the pin out horizontally..
Check Stock

Freeman PFS18 Pneumatic 18 Gauge 7/8\ Fencing Stapler , Black

  • Ideal for mesh and woven applications such as electrified single wire with insulation, vineyard trellising, snow control fencing, pet enclosures, and livestock fencing.
  • Compatible with 18 gauge fencing staples from 3/8" to 7/8".
  • Quick jam release allows for easy access to the drive blade in the case of a jammed fastener.
  • Tool-free finger depth adjust for various applications.
  • One piece drive blade for increased durability extends the life of the tool.
  • Anodized aluminum cylinder and magazine provides a rugged lightweight tool great for extended use.
  • Convenient reload indicator to see when fencing staples are running low.
  • Easy to load magazine features a simple pull-back pusher.
  • Comfort grip handle reduces vibrations and impact, increasing control and accuracy.
  • 360 degree adjustable exhaust allows user to easily direct air away from face.
Check Stock

Eumyviv A00001 Cylinder with Bottom Clear Bubble Glass Lamp Shade

  • DIMENSIONS: Straight cylinder light globes. Features 3.5" diameter and 5.5" height. The hole at bottom fits 1-5/8-inch (41.27mm) fitter opening light fixtures. 【Please confirm the size before purchase】.
  • HIGH TRANSMITTANCE GLASS: Thickened clear seeded glass replacement with fitter. Good light transmission, visibility and heat insulation. Showcase bulb beautifully..
  • SOFT LIGHTING EFFECTS: Simple style but awesome. With vintage edison bulb, it is great to add a bit of elegant atmosphere to different homes with different styles..
  • WIDELY USED: This Glass Pieces are perfect for multifarious household wall lamps, sconces, pendant lamps, island lights, chandeliers, ceiling lights or hanging light fixtures..
  • FAST DELIVERY & GOOD SERVICE: FBA products. Delivery is handled by Amazon. Short delivery time after place order. 【Free replacement for any defects and lifetime services】..
Check Stock