Reviews Insulated Ducts

Draft Blocker 4 Inch - Backdraft Damper - Draft Stopper - Backflow Preventer - Vent Deflector (4'' Inch)

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check Stock

Draft Blocker - 4'' Inch Backdraft Damper Duct - Draft Stopper - Backflow Preventer - Inline Fan Vent - Vent Deflector (4'' Inch)

  • Back draft damper is made for insertion into inch ventilation ducts. The backflow damper RKI opens and closes automatically. It has a strong spring and can be installed either horizontally or vertically. The flap is suitable for retrofitting, since it is completely inside the duct.
  • Damper has 2 valves, designed for use in air conditioners (AC), dryers, exhaust, extractor or range hoods, heating ducts, vents and other HVAC applications.
  • INSTALLATION: The backflow flap is installed by inserting it into the ventilation pipe until it stops. The position of the spring should be horizontal for horizontal installations so that it can open and close optimally. The Backdraft shutter is installed so that the damper blades open only in the outflowing air direction..
  • The backflow flap opens and closes automatically at low air volumes. It has a smooth-running spring and an internal foam strip to keep the blades from rattling and can be installed horizontally or vertically.
  • Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ....
Check Stock

Frida Mom 2-in-1 Lactation Massager - Multiple Modes of Heat + Vibration for Clogged Milk Ducts, Increase Milk Flow, Breast Engorgement - USB Cord Included

  • Increase milk flow: vibration + heat bust through buildup + clogged ducts, and get milk flowing. Choose the mode you need to get the job done..
  • Relieve clogged ducts + engorgement: the breast care tool to have on hand for pain-in-the-boob nursing + PUMPING moments and to prevent other symptoms and supply issues..
  • Different ends + sides: help unclog stubborn ducts, pull out blocked milk and empty breasts..
  • Pocket-size + rechargeable. No batteries Needed, just recharge with USB cord - even on-the-go!.
  • Water resistant. Designed to be used for massages in the shower (when the flow won't go!)..
Check Stock

Thicker Aluminum Foil Tape 2inch x 50 Feet Foil Thick of 4mil Industrial Grade HVAC Metal Tape Heavy Duty Silver Duct Tape for Sealing& Insulation Ductwork Exhaust Pipe Air Vents AC Dryer Furnace

  • ...ace/stove pipe, repair exhaust piping, fixing hose and metallic copper pipe, stainless steel and plastic joints/seams, aluminum alloy seals, EMI & RFI shielding, making grounding mats, decoration arts & crafts, wrapping ac/heaters ducting, making EMP protector, foam board insulation, wire harness wrap, auto insulated materials, exhaust leak, light reflecting, moisture barrier, thermal conducting, single sided conductive, heat shield, and more..
  • Easy to use: Professional grade hvac tape is 4mil thick, perfect for use on all types of ducts and pipes, easy to apply to piping surfaces and not easy to break. Thicker metal foil and backing paper are easier to peel away from the edges, less likely to wrinkle and curl, no residual glue, easy to apply in the field and no tools needed during installation..
  • Package Included: The whole roll of aluminum foil tape is 50 feet/15m long by 2 inch/5mm wide, metal foil thick 4.0 mil (not including the thickness of the backing paper). Note: Ensure that surface is clean, dry, free of grease, oil or other contaminants before applying aluminum tape..
Check Stock

Allstar ALL42151 Black 3" x 10' Brake Duct Hose

  • Brake duct hose measures 3 inch diameter x 10 feet long.
  • Hose is flexible, features a non-kink design, and directs air from the front ducts to the spindle ducts.
  • Made from a black 3 inch double-ply neoprene-coated woven fiberglass hose with a spring steel inner and external fiberglass supports.
  • Features a smooth inner wall for unrestricted air flow.
Check Stock

DGT35 Galvanized Round Transition (5\)

  • 【Size】Made of galvanized steel. Adapts 8 inches to 6 inches. Round Ducting Adaptor.
  • 【Widely Application】Designed for bathroom extractor fans, HVAC systems, inline ventilators, cooker hoods, tumble dryers, hydroponics, kitchen..
  • 【Adventages】Maintains airflow efficiency by creating a connection between two different sized duct openings..
  • 【How to Use】The solid duct reducer or increaser can be used when connecting two different solid or flexible ducts or ducts to ventilators, 8 to 6 inch, or vice versa..
  • 【Easy to Install】Put it in the two ducting, easy to install the air duct reducer..
Check Stock

EAZY2HD 24 Feet Flexible Dryer Duct Cleaning Kit Lint Remover,Extends up to 24 Feet,Two Synthetic Clean Brush Heads,Includes 18 Flexible Rods,Use With or Without a Power Drill

  • VALUABLE TOOL : Comes with 18 flexible rods and 2 brush heads. Our dryer vent cleaning brush is 4″ diameter, and can be used in 3-4″ ducts. These can also be used with a/c ducts and pellet stove pipes. They work great with PVC, flex ducts, metal ducts, pipes, and delivers results fast.Note:Please don’t use it for flexible foil duct work..
  • USE IN TIGHT SPACES: The rods are extremely durable, flexible and will bend with little to no effort at all. Keep the duct brush spinning at a low speed and use steady when working with a drill to prevent tearing of flexible vent..
  • EASY TO USE:Simply disconnect the pipe from the dryer and from the wall (connection is usually located right behind the dryer).
  • The dryer vent cleaner kit can be used connected to a drill. Always use the drill in a clockwise direction and low speed to prevent the rods from unscrewing at the threaded connections. Add extension rods as needed and secure them with duct tape..
  • SAFETY AND EFFICIENCY: With our dryer vent cleaning kit, delivers superior results and helps you prevent costly repairs. It helps prevent dryer fires by regularly removing dangerous lint build-up.In addition to helping to prevent dryer fires, this will also reduce drying time and help extend the life of y....
Check Stock

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Deflector Silver

  • 【Material】The 4 inch backdraft damper is made of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
  • 【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
  • 【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
  • 【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
  • 【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..
Check Stock

4 Inch Draft Blocker Backdraft Damper Duct Draft Stopper One-Way Airflow Ducting Insert Backflow Preventer Inline Fan Vent Vent Deflector (4 in)

  • 【Material】The 4 inch backdraft damper is made out of a Galvanized steel, the flap leaves are made of aluminum, while the Axis and spring are made of stainless steel..
  • 【Installation】The backdraft damper is installed by pushing it into the ventilation pipe as far as it will go. The position of the spring should be horizontal when the flap is installed horizontally so that it can be opened and closed optimally. This also applies to the vertical installation..
  • 【Function】This airflow regulating backdraft shutter fits over the TD lip and is designed to improve ventilation by preventing air from re-circulating when the fans are not in use..
  • 【Wide Application】 These backdraft dampers can be widely used in ACs, exhaust fans, extractors, range hoods, heating ducts, vents and other residential, commercial and industrial applications..
  • 【Note】Back draught valves can be inserted into ventilation ducts which are flexible or non flexible. Cannot be used with plastic ducts as the sizes are different..
Check Stock

Westspark 2' Fiber-Glass Cloth Tape Roll, 2 inches x 65 Yards Self-Adhesive Silver Duct Heat Reflective Tape, Insulation Resistant High Temperature HVAC Tape, Metal Repair, Patching Hot Cold Air

  • ➜ Insulation sealing tape Size: 2in, 20M, high-strength foil-scrim-kraft paper laminate backing resists tearing..
  • ➜ Fiber-Glass Composites cloth Foil Tape is waterproof, heat and high temperature resistant, rust proof, electronic jamming, for repairing, perfect shielding and anti-interference, with many applications..
  • ➜ Perfect for sealing air ducts, designed to easily for Pipe Sealing, HVAC, Metal Repair, Patching Hot Cold Air Ducts, Heat Insulation..
  • ➜ Self-Adhesive Heat Reflective Tape is waterproof, heat and high temperature resistant, rust proof, electronic jamming, for Pipe Sealing, HVAC, Metal Repair, Patching Hot Cold Air Ducts, Heat Insulation Wrap Exhaust Shield Thermal Barrier tape and so on..
  • ➜ This tape roll provides a durable bond at low and high temperatures. Conformable backing and pressure sensitive adhesive means it will adhere properly to a variety of smooth and irregular surfaces..
Check Stock

Sealproof Mini Split AC Line Set Cover Kit, 3" Decorative White Professional Grade PVC Kit Provides 15 FT Line Coverage for Ductless Mini Split Air Conditioners and Heat Pumps

  • Complete line set cover for ductless mini split A/C and heat pump units can be configured in any way required for your setup. Professional grade, durable PVC frame protects your system from sun exposure providing a longer life for your ductless system..
  • Perfect for systems of 9,000 or 12,000 BTU as well as most 18,000 BTU and many higher BTUsystems. 4 straight ducts provide flexibility of 15 ft of coverage to suit your needs..
  • Durable finished PVC protects lines and wiring from extreme temperature or weather conditions. Attractive white, premium PVC can be painted in the color of your choosing for the decorative look that is right for you..
  • Easy installation for any existing or new setup. Includes four straight ducts of 39.37" each that can be arranged or cut to fit your needs..
  • Kit includes: Four (4) 39.37" Straight PVC Ducts, Three (3) Duct Connectors, One (1) Wall Corner, One (1) 90° Corner, One (1) End Cap, One 1() Flexible Joint..
Check Stock

Taytools 465388 Set of 6 each 4 OD Blast Gates Self Cleaning No Clog Aluminum for Dust Collection System

  • Designed to fit 4" diameter hose or ducts.
  • Direct air flow to exactly where you need it and maximize dust extraction by opening and closing select ducts.
  • Open slot at back to for self-cleaning, no-clog operation.
  • Cast aluminum, steel sliding gate, locking knob.
Check Stock

Imperial Manufacturing Duct Angle Boot 3-1/4X10X4In GV0605

  • The best option to connect two straight ducts.
  • Easy to use. Simply slide in the two ducts and fasten with hose clamps or reinforced aluminum ducting tape.
  • Diameter is 5.9'' Inches to fit a 6'' duct. Length is 4'' Inches..
  • Increased durability with protrusion in the middle to withstand more pressure and to have a safer connection.
  • Each product goes through strict quality control and is well tested to ensure customer satisfaction and to serve for many years to come. MANUFACTURED IN EU.
Check Stock