Reviews Instrtument Tube Fitting

2pcs Compression Tube Fitting Adapter, Stainless Steel Straight Adapter, Double Ferrule Joint Connector, for Connecting Pipes Fittings(Ф6-Ф14)

  • 【Reasonable Design】The quick-screw design of the sleeve has good air tightness and is not easy to leaking..
  • 【High-quality Materials】The tube fitting adapter is made of 304 stainless steel, which is resistant to rust and corrosion..
  • 【Good Fixability】The design of the middle card board of the compression tube fitting adapter can be fixed without shaking..
  • 【The Scope of Application】The tube fitting double ferrule joint connector is an adapter used to connect different types of pipes or fittings..
  • 【Easy to Install and Disassemble】The stainless steel compression tube fitting adapter can be quickly installed and removed, making it more convenient to use..
Check Stock

UltraPure 3403410 1/4\ MPT x 3/8\ Tube Ozonator Compression Fitting

  • Sleeve for a tube compression fitting. Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube.
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 3/16\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -55°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Quickun Brass Compression Fitting Ferrule Sleeve, 1/8\ Tube OD (Pack of 30)

  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting, Nut, 1/2\ Tube OD

  • Nut for connecting to a compression tube fitting.
  • Stainless steel 316 for higher strength and greater corrosion resistance than stainless steel 304.
  • Maximum operating temperature range of -100 to +1,000 degrees F.
  • Meets ASTM A213 and A269 standards for quality assurance.
Check Stock

Joywayus 3/8\ Tube OD Brass Ferrule Fittings Compression Sleeves Brass Compression Fitting(Pack of 50)

  • Size:3/8" Tube OD. Package included: 50pcs Compression Ferrule Sleeve. It is packed in plastic box to avoid product damage..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Beduan Reducer Tri Clamp Ferrule Stainless Steel 304 Sanitary Fitting 2\ Tube OD to 1-1/2\ Tube OD (Pack of 1)

  • Reducer sanitary fitting can be used to connect two pipes of different diameters that are along the same pipe axis..
  • High quality 304 stainless steel, having durable and long service life..
  • Tube OD: reducing 2" tube OD to 1.5" tube OD - (51mm to 38mm tube OD)..
  • Tri clamp size: reducing 2" Tri Clamp / Clover / Sanitary to 1.5" Tri Clamp / Clover / Sanitary - (64mm to 51mm Ferrule OD)..
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access..
Check Stock

EilxMag DOT Air Line Fittings Assortment, 44 Pcs Push to Connect Fittings NPT Male Thread & DOT Brass Air Brake Line Fittings Kit

  • 【Premium Material】: Our air line fittings are made of PBT Plastic, the air brake brass fittings DOT approved are made of high quality CA360 brass, with corrosion resistance, high temperature ductility and low permeability. Great for long time use..
  • 【Quantity】: Unique dot air line quick connect fittings nylon tubing kit: The plastic tube fittings contain 28 pieces: 8 pcs Male straight push connectors, 6 pcs Straight tube unions. 6 pcs 90 degree Elbows. 4 pcs 90 degree Elbows NPT thread. 4 pcs Tube tees. The brass tube fittings contain 16 pieces: 5 pcs Male connectors. 5 pcs Male 90° elbows. 3 pcs Tube tees. 3 pcs Tube unions. Fit type: 1/2", 3/8", 1/4"..
  • 【Typical Application】: The push-to-connect fitting 1/4 inch are suitable for PU / PA / PE / PVC. The dot air fittings assortment can be used with air systems, and copper tubing in air brake systems. They are widely applied in automotive, manufacturing production lines, car or truck repair, industrial workshops, daily garden or lawn mower repair, towing machine hose connections and so on..
  • 【Easy to install】: Our air fitting kit quicks....
Check Stock

Jonard Tools FDC-66 Fiber Optic Scraps Disposal Can

  • 10 Pack Ceramic Tube Core Sleeves + 10 Pack Metal Insert Fitting Head Connectors..
  • Great to replace your old broken cermic tube and metal fitting connector..
  • 20 Pieces/Set Fiber Optic Visual Fault Locator Replacement Parts Accessories..
Check Stock

2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)

  • 2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
  • Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
  • The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
  • Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
  • Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
  • Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
  • Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
  • Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
  • It can help you drill easily and fast and save time and energy for you.
  • The combination of blue and black color makes the dr....
Check Stock

FORD part# 7L3Z-7A785-A Auto Hub Lock Operating Vacuum Tube OEM BRAND NEW

  • 2004-2008 Ford F150 4×4 Auto Hub Lock Connector Vacuum Line Fitting Tee Tube OEM.
  • (4WD) 4×4 Front Auto Hub Locks, Vacuum Line Fitting Tee Tube Connector.
Check Stock

RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)

  • Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
  • Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
  • Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
  • Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
  • Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
Check Stock

Malida 1/2\ Thread Male to 1/4\ Push Fit Tube Quick Connect for Water Purifiers Reverse Osmosis (5pack)

  • Product Name: Straight 1/2“Npt to 1/4" Tube OD Push-in Connect Fittings,1/2" Male Thread Connector Adapter..
  • Easy Installation: New generation Non-Locking Clip technology offers an easy Diy Installation Without Tools Required, Just Push In to Connect..
  • Package Included: 1/2"Npt to 1/4" Tube OD Push To Connect Fitting,5 pcs..
  • Applications Include RO System Beverage Dispensing Refrigerator Ice Maker Coffee Machine etc..
  • Size&Tube Compatible With:1/4 inch Quick Connect fitting Size,Fits standard 1/4 od Tubing Used On Most Water Purification Systems..
Check Stock