Reviews Insert Tool

Accusize Industrial Tools 5/8'' Shank 7 Pc Indexable Carbide Turning Tool Set in Fitted Box, 2387-2005

  • Model of each holder & the original insert: MGEHR10-3B (insert: MGMN300).
  • SCLCR10-3B & SCLCL10-3B (insert: CCMT32.5).
  • SDNCN10-3B & SDJCR10-3B (insert: DCMT32.5).
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
  • *** Insert kit Item#: 2387-2005INSERTS (Sold Separately on Amazon)***.
Check Stock

Accusize Industrial Tools 7 Pieces/Set 1/2'' Indexable Carbide Turning Tool Set with 10 Extra Carbide Inserts in Fitted Box, 2387-2004plus

  • Model of each holder & the original insert: MGEHR08-2J (insert: MGMN200-M).
  • Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Check Stock

XINGYHENG 210pcs M3 M4 M 5 M6 M8 M10 M12 Wire Thread Inserts Steel Sheath Helicoil Type Screw Repair Sleeve Assortment Kit with Plastic Box

  • THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
  • SPEEDS UP INSTALLATION – Quickly insert threaded inserts for soft wood with this optional threaded insert installation tool without time-consuming thread engagement..
  • FITS STANDARD POWER DRILLS – A standard hex shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
  • FOR USE WITH THREAD INSERTS – This threaded insert tool is used exclusively to quickly drive in Hex Drive Inserts..
  • IT’S AS EASY AS 1-2-3 – Installation is easy. Simply drill a hole with a standard drill. Thread an E-Z LOK thread insert into place with this optional drive tool..
Check Stock

E-Z LOK Drive Tool - Optional - Use with 329-4, 329-401, 329-428, 303-4, 303-428, 319-4, 319-428, 335-4, 450-6, 550-1420, 650-6, 400-4, 400-428, 400-M6

  • THREADED INSERT INSTALL TOOL – E-Z LOK Threaded Insert Drive Tool speeds up the installation of threaded inserts without engaging internal threads..
  • SPEEDS UP INSTALLATION – Quickly insert threaded inserts for metal and knife thread inserts for hard wood with this optional threaded insert installation tool without time-consuming thread engagement..
  • FITS STANDARD POWER DRILLS – A standard shaft allows for the use of this threaded insert drill tool with standard power drills and drill presses..
  • FOR USE WITH THREADED INSERTS - This installation tool is used with E-Z LOK solid wall inserts for metal..
  • IT'S AS EASY AS 1-2-3 - Installation is easy. Simply drill a hole a standard drill. Tap the hole with a standard tap. Thread the E-Z LOK insert into place with this optional drive tool..
Check Stock

Accusize Industrial Tools 5/8\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0058

  • Smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
  • 9pcs hex screw, Hexagon key and Aluminum fitting case..
  • *** Insert kit Item#: 2988-0058INSERTS (Sold Separately on Amazon)***.
Check Stock

XSPC Easy Cut & Bend Toolkit for XSPC PETG Tubing

  • Heavy Duty Hose Cutter – The heavy duty cutter can cut through PETG tubing as effortlessly as you would cut flexible PVC tubing. Easily cut PETG rigid tubing without the need for a saw..
  • PETG Easy Bending Tool – This tool allows you to easily bend PETG tubing at an angle between 0 and 180 degrees. Just heat the tubing with the bending rubber inserted, insert the tube into the tool and bend it to the required radius. This simple tool takes the guess work and difficulty out of bending rigid tube. (Suitable for 12-14mm outer diameter tubing).
  • Bending Rubber – Solid rubber extrusion for bending PETG tubing. Insert into the tube before bending, to stop the PETG tube kinking, or deforming. (Bending rubber diameter is 10mm).
  • PETG Chamfer Tool – Quickly chamfer the edges of PETG tubing by using this handy tool. Just insert the tubing and turn anticlockwise..
  • PETG Edging Sandpaper – Ideal for sanding the edges of PETG tubing, after using a chamfer tool..
Check Stock

Hoover CleanSlate Plus Carpet & Upholstery Spot Cleaner, Stain Remover, Portable, with Pet Kit, FH14051, White

  • POWERFUL SUCTION: Powerful suction for life size spots and stains.
  • TOOLS FOR EVERY MESS: You've got the tools for every mess with the 7” WidePath Tool for large areas like stairs and the TightSpot Tool for crevices and tough to reach areas.
  • PERMANENT STAIN REMOVAL: Permanently remove pet stains and eliminate odors..
  • QUICK AND PORTABLE: Quickly remove spills, stains, and set-in messes with the portable CleanSlate that offers powerful suction and the tools you need for any job, large or small.
  • TYPES OF MESSES: Clean tough messes like mud, wine, pet messes and more from carpets and upholstery.
  • HOSE RINSE: Easy to clean, the Hose Rinse Tool flushes the machine with water to remove any left behind dirt and debris.
  • DUAL TANKS: The Dual Tank System has 40oz clean solution capacity so you can clean farther while clean water and dirty water stay separate.
  • BONUS PET TOOL AND WHAT'S INCLUDED: 18ft. Cord, WidePath Tool with Bristles Insert and Rubber Nub Insert, BONUS Small Area Tool with Bristles Insert, Tight Spot Tool, Hose Rinse Tool, Pet Tool, BONUS Accessory Bag, and 6oz Oxy Concentrate.
Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • ...tric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
  • Use the breaking pin tool to remove tang from insert.
Check Stock

Katzco Red Precision Magnetizer and Demagnetizer - 3 Pack - for Screwdrivers, Screws, Drill Bits, Sockets, Nuts, Bolts, Nails, Drivers, Wrenches, Tweezers, and Other Steel Tools

  • EASY TO USE- No batteries or electrical required.To magnetize a tool, simply slide it through the center hole. To de-magnetize a tool, slide it through the side slots. If you need to work with electronic parts requiring demagnetized tools, just insert the screwdriver tip in the negative terminal cavity.To magnetize the screwdriver tip, insert it in the positive terminal cavity..
  • PORTABLE- The lightweight and compact design of this magnetizer/demagnetizer makes it amazingly portable to fit in tool bags and super easy to store in workshops/tool sheds. Since it does not require battery, it is even more portable and can be deployed for used at any time..
  • CONVENIENT- Converts any tool blade to a magnetic retriever of screws, nuts and metallic particles. Perfect for demagnetizing tweezers, screwdrivers and other small tools. Will also magnetize bigger sized tools.Minimize tools slippi....
Check Stock

GBJ 10pcs RCMT10T3M0 Gold + SRDCN 1616H10 5/8\ 45° Lathe Turning Holders Lathe Turning & Profiling Tool Holder for Round Carbide Inserts RCMT (SRDCN1616H10+RCMT10T3M0 YBC251)

  • Smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
  • 9pcs hex screw, Hexagon key and Aluminum fitting case..
  • *** Insert kit Item#: 2988-0001INSERTS (Coming Soon)***.
Check Stock

OSCARBIDE 3/8

  • Mini Turning Tool holders with 3/8'' Shank, 5ps/set AL, AR, BL, BR, and E Tool Holders with 5 TCMT C-6 Inserts.
  • Multiple cutting surfaces available provide longer tool life,Carbide Inserts can be rotated to a new cutting edge without changing the position of the tool holder.
  • Positive rake cutting and built-in chip breaker groove,for Turning, Cutting, Facing, Boring, and Chamfering.
  • Carbide insert is coated with tin to provide long life and sharpness,higher temperatures than ordinary steel tools .turning tool holder is made of high-quality steel, coated with nickel for durability,moisture proof and resistant to rusting and corrosion..
  • Replacement insert for this kit ,please search the Asin of this item: B07Q2HNGVF to buy it.
Check Stock

The Hillman Group 260288 1 1 1 1/2 x 8-Inch Anchor Bolt, 50-Pack

  • Machine Screw Anchors For Concrete You will receive only Machine Screw Anchors when you place a order on this page. The setting tool and sidewalk bolts are not included..
  • Using a ½" Combination Drill Bit, drill a hole deep enough to insert a 1/4-20 Machine Screw Anchor into the Concrete or Concrete Block. Blow-out any excess dust in the hole. Insert a ¼-20 Machine Screw Anchor with the threaded cone end portion entering the concrete first..
  • Insert a ¼" Setting Tool into the lead portion of the Anchor and strike the Setting Tool with a hammer until the lip of the setting tool meets the top of the Machine Screw Anchor. Your Anchor is now ready for use with ¼-20 Bolts..
  • For a Anchor Setting Tool or a Combo Drill Bit scroll down past Amazon advertising on this page to see search numbers..
  • Please do all your research before ordering. Make sure you are comfortable on the installation process before you order. Returns are subject to a 15% or more restocking fee depending on return condition..
Check Stock

5/8\ 2PCS CNC Lathe Carbide Indexable Threading Turning Tool Holder SER1616H16 + SEL1616H16 with 2PCS 16ER/IR AG60 BP010 Indexable Carbide Turning Insert Blade

  • PACKAGE INCLUDES : You will receive 1 pieces SER1616H16 5/8”/16mm shank diameter lathe turning tool holder , 1pcs SEL1616H16 5/8”/16mm shank diameter lathe turning tool holder,1pc 16ER AG60 threading carbide turning insert,1pc 16IR AG60 threading carbide turning insert and 2pcs T15 wrenches..
  • Material : The SER/L1616H16 5/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
  • Turning tool holder size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 3mm..
  • If you need more inserts,you can search for ASIN:B07FFR8K53(16ER AG60) or B07FFPFT93(16IR AG60) ..
Check Stock